Hi,
I have just bought a Belkin USB adapter 0x050d:0x016a, and according to hciconfig this is a Bluetooth 2.1 device:
# hciconfig hci0 version revision
hci0: Type: USB
BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1
HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e
Manufacturer: Broadcom Corporation (15)
Firmware 132.66 / 14
Does this mean that the adapter cannot possibly work correctly in anything less than a 2.6.27 kernel? Because it clearly *isn't* working correctly at the moment:
# hciconfig hci0 name
Can't read local name on hci0: Input/output error (5)
# hciconfig hci0 class
Can't read class of device on hci0: Input/output error (5)
# hciconfig hci0 voice
Can't read voice setting on hci0: Input/output error (5)
# hciconfig hci0 iac
Failed to read IAC from hci0: Input/output error
etc.
According to lsusb, this device is actually a USB hub with several other devices attached to it:
$ /sbin/lsusb
...
Bus 004 Device 018: ID 050d:016a Belkin Components
Bus 004 Device 017: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 016: ID 0a5c:4502 Broadcom Corp.
Bus 004 Device 015: ID 0a5c:4500 Broadcom Corp.
...
usb 4-1: new full speed USB device using uhci_hcd and address 15
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using uhci_hcd and address 16
usb 4-1.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /class/input/input12
input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-1.1
usb 4-1.2: new full speed USB device using uhci_hcd and address 17
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /class/input/input13
input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-1.2
usb 4-1.3: new full speed USB device using uhci_hcd and address 18
usb 4-1.3: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Here are the device descriptors:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4500 Rev= 1.00
S: Manufacturer=Broadcom
S: Product=BCM2046B1
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 94mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=04 Lev=02 Prnt=15 Port=00 Cnt=01 Dev#= 16 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4502 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=04 Lev=02 Prnt=15 Port=01 Cnt=02 Dev#= 17 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4503 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=04 Lev=02 Prnt=15 Port=02 Cnt=03 Dev#= 18 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=050d ProdID=016a Rev= 3.88
S: Manufacturer=Broadcom Corp
S: Product=BLUETOOTH USB +EDR ADAPTER v2.1 UHE
S: SerialNumber=000A3A8376DA
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
Obviously I would like to get this adapter working properly, so please let me know if there is anything that I can do to help. (Apart from fry my e1000/e1000e network adapters, that is ;-).)
Cheers,
Chris
Hi Chris,
> > http://www.argos.co.uk/static/Product/partNumber/6756035/Trail/searchtext%3EBLUETOOTH.htm
> >
> > The one at Argos says it's a 2.0 version. I guess those
> > aren't the same pieces of hardware?
>
> Well, the picture is *identical* to the adapter I bought, and I bought this one at Argos too ;-).
even the Targus one still says Bluetooth 2.0, but it is real 2.1
hardware. I bought two more before I left Portland :)
Regards
Marcel
--- On Sat, 27/9/08, Bastien Nocera <[email protected]> wrote:
> http://www.argos.co.uk/static/Product/partNumber/6756035/Trail/searchtext=
%3EBLUETOOTH.htm
>=20
> The one at Argos says it's a 2.0 version. I guess those
> aren't the same pieces of hardware?
Well, the picture is *identical* to the adapter I bought, and I bought this=
one at Argos too ;-).
Cheers,
Chris
=0A=0A=0A
On Thu, 2008-09-25 at 14:59 -0700, Chris Rankin wrote:
> --- On Fri, 26/9/08, Marcel Holtmann <[email protected]> wrote:
> > can you point us to the exact model number and maybe a picture or shop
> > where I could order one.
>
> Heh, I should charge Belkin a commission ... ;-)
>
> http://www.dabs.com/ProductView.aspx?Quicklinx=564Q
>
> or (for a better picture)
>
> http://www.argos.co.uk/static/Product/partNumber/6756035/Trail/searchtext%3EBLUETOOTH.htm
The one at Argos says it's a 2.0 version. I guess those aren't the same
pieces of hardware?
--- On Fri, 26/9/08, Marcel Holtmann <[email protected]> wrote:
> can you point us to the exact model number and maybe a picture or shop
> where I could order one.
Heh, I should charge Belkin a commission ... ;-)
http://www.dabs.com/ProductView.aspx?Quicklinx=3D564Q
or (for a better picture)
http://www.argos.co.uk/static/Product/partNumber/6756035/Trail/searchtext%3=
EBLUETOOTH.htm
The model number is: F8T016
And once I'd warmed it in a hot fire for a short time, I noticed some other=
markings on it which (translated from the Elvish) read:
FCC ID:K7SF8T016
IC:3623A-F8T016
There's also a version of this adapter with 100m range, should you ever wis=
h to share your bluetooth link with all of your neighbours.
And yes, it really *is* this small! I was planning on installing it permane=
ntly in the back of one of my machines, or risk losing it completely, but t=
he machine then refused to boot. (It's an old machine with USB 1.1 ports at=
the back; it might be confused by the adapter's "hub on a chip", or possib=
ly by the adapter's built-in keyboard and mouse devices.)
Now that we know how to get it working, I will be able to experiment with i=
t further.
Cheers,
Chris
=0A=0A=0A
Hi Chris,
> I have just bought a Belkin USB adapter 0x050d:0x016a, and according to hciconfig this is a Bluetooth 2.1 device:
can you point us to the exact model number and maybe a picture or shop
where I could order one.
Regards
Marcel
--- On Thu, 25/9/08, Marcel Holtmann <[email protected]> wrote:
> load btusb or hci_usb with reset=3D1 and if that helps, I can
> add a quirk for this dongle.
Yes, that certainly did the trick :-) !! There's a bit of noise in the dmes=
g log from usbhid:
usb 4-1: new full speed USB device using uhci_hcd and address 28
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using uhci_hcd and address 29
usb 4-1.1: configuration #1 chosen from 1 choice
input: HID 0a5c:4502 as /class/input/input18
input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-1=
.1
usb 4-1.2: new full speed USB device using uhci_hcd and address 30
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 0a5c:4503 as /class/input/input19
input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-1.2
usb 4-1.3: new full speed USB device using uhci_hcd and address 31
usb 4-1.3: configuration #1 chosen from 1 choice
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
usbhid: input irq status -75 received
But it does actually (seem to) work now:
# hciconfig -a hci1
hci1:=09Type: USB
=09BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1
=09UP RUNNING PSCAN=20
=09RX bytes:2536 acl:0 sco:0 events:37 errors:0
=09TX bytes:628 acl:0 sco:0 commands:37 errors:0
=09Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
=09Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3=20
=09Link policy: HOLD SNIFF PARK=20
=09Link mode: SLAVE ACCEPT=20
=09Name: 'whatever-1'
=09Class: 0x080104
=09Service Classes: Capturing
=09Device Class: Computer, Desktop workstation
=09HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e
=09Manufacturer: Broadcom Corporation (15)
Thanks,
Chris
=0A=0A=0A
Hi Chris,
> I have just bought a Belkin USB adapter 0x050d:0x016a, and according to hciconfig this is a Bluetooth 2.1 device:
>
> # hciconfig hci0 version revision
> hci0: Type: USB
> BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1
> HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e
> Manufacturer: Broadcom Corporation (15)
> Firmware 132.66 / 14
>
> Does this mean that the adapter cannot possibly work correctly in anything less than a 2.6.27 kernel? Because it clearly *isn't* working correctly at the moment:
load btusb or hci_usb with reset=1 and if that helps, I can add a quirk
for this dongle.
Regards
Marcel
Hi Marcel,
On Wed, Oct 1, 2008 at 12:06 PM, Marcel Holtmann <[email protected]>wrote:
> Hi Ville,
>
> > I have A-link dongle with following records. This seems to require the
> > same quirk. Tested with v2.6.26-mh4 and btusb module.
> >
> > hci0: Type: USB
> > BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> > UP RUNNING
> > RX bytes:5385 acl:0 sco:0 events:70 errors:0
> > TX bytes:698 acl:0 sco:0 commands:48 errors:0
> > Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: RSWITCH HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'null-0'
> > Class: 0x000100
> > Service Classes: Unspecified
> > Device Class: Computer, Uncategorized
> > HCI Ver: 2.1 (0x4) HCI Rev: 0x5111 LMP Ver: 2.1 (0x4) LMP
> > Subver: 0x420e
> > Manufacturer: Broadcom Corporation (15)
> >
> > hci0: Type: USB
> > BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> > Firmware 17.66 / 14
>
> can you give me the simple lsusb and /proc/bus/usb/devices for this one
> please.
Here you are. Note that this dongle is also shown as 2xHID device and usb
hub in addition to bluetooth device.
Relevant part of lsusb
---- clip ----
Bus 001 Device 066: ID 0a5c:2146 Broadcom Corp.
Bus 001 Device 065: ID 0a5c:4503 Broadcom Corp.
Bus 001 Device 064: ID 0a5c:4502 Broadcom Corp.
Bus 001 Device 063: ID 0a5c:4500 Broadcom Corp.
----- clip ---
relevant part of /proc/bus/usb/devices
---- clip ----
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 63 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4500 Rev= 1.00
S: Manufacturer=Broadcom
S: Product=BCM2046B1
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 94mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=63 Port=00 Cnt=01 Dev#= 64 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4502 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=02 Prnt=63 Port=01 Cnt=02 Dev#= 65 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4503 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=02 Prnt=63 Port=02 Cnt=03 Dev#= 66 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=2146 Rev= 2.73
S: Manufacturer=Broadcom Corp
S: Product=BCM92046DG-CL1ROM
S: SerialNumber=0002721615F9
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
---- clip ----
Hi Ville,
> I have A-link dongle with following records. This seems to require the
> same quirk. Tested with v2.6.26-mh4 and btusb module.
>
> hci0: Type: USB
> BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> UP RUNNING
> RX bytes:5385 acl:0 sco:0 events:70 errors:0
> TX bytes:698 acl:0 sco:0 commands:48 errors:0
> Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'null-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 2.1 (0x4) HCI Rev: 0x5111 LMP Ver: 2.1 (0x4) LMP
> Subver: 0x420e
> Manufacturer: Broadcom Corporation (15)
>
> hci0: Type: USB
> BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
> Firmware 17.66 / 14
can you give me the simple lsusb and /proc/bus/usb/devices for this one
please.
Regards
Marcel
Hi Marcel,
On Fri, Sep 26, 2008 at 1:23 AM, Marcel Holtmann <[email protected]>wrote:
> Hi Chris,
>
> > I have just bought a Belkin USB adapter 0x050d:0x016a, and according to
> hciconfig this is a Bluetooth 2.1 device:
> >
> > # hciconfig hci0 version revision
> > hci0: Type: USB
> > BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1
> > HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver:
> 0x420e
> > Manufacturer: Broadcom Corporation (15)
> > Firmware 132.66 / 14
> >
> > Does this mean that the adapter cannot possibly work correctly in
> anything less than a 2.6.27 kernel? Because it clearly *isn't* working
> correctly at the moment:
>
> load btusb or hci_usb with reset=1 and if that helps, I can add a quirk
> for this dongle.
>
I have A-link dongle with following records. This seems to require the same
quirk. Tested with v2.6.26-mh4 and btusb module.
hci0: Type: USB
BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:5385 acl:0 sco:0 events:70 errors:0
TX bytes:698 acl:0 sco:0 commands:48 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'null-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 2.1 (0x4) HCI Rev: 0x5111 LMP Ver: 2.1 (0x4) LMP Subver:
0x420e
Manufacturer: Broadcom Corporation (15)
hci0: Type: USB
BD Address: 00:02:72:16:15:F9 ACL MTU: 1021:8 SCO MTU: 64:1
Firmware 17.66 / 14
Bus 001 Device 030: ID 0a5c:2146 Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a5c Broadcom Corp.
idProduct 0x2146
bcdDevice 2.73
iManufacturer 1 Broadcom Corp
iProduct 2 BCM92046DG-CL1ROM
iSerial 3 0002721615F9
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 07 21 07 88 13 40 00
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 029: ID 0a5c:4503 Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0a5c Broadcom Corp.
idProduct 0x4503
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 113
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 028: ID 0a5c:4502 Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0a5c Broadcom Corp.
idProduct 0x4502
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 56
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 027: ID 0a5c:4500 Broadcom Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x0a5c Broadcom Corp.
idProduct 0x4500
bcdDevice 1.00
iManufacturer 1 Broadcom
iProduct 2 BCM2046B1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 94mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0004
Ganged power switching
Compound device
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x0e
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0103 power enable connect
Port 3: 0000.0103 power enable connect
Device Status: 0x0000
(Bus Powered)
--
Ville