Return-Path: Date: Thu, 25 Sep 2008 12:25:38 -0700 (PDT) From: Chris Rankin Reply-To: rankincj@yahoo.com Subject: Bluetooth 2.1 USB adapter! To: linux-bluetooth@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Message-ID: <294606.8239.qm@web52903.mail.re2.yahoo.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi, I have just bought a Belkin USB adapter 0x050d:0x016a, and according to hciconfig this is a Bluetooth 2.1 device: # hciconfig hci0 version revision hci0: Type: USB BD Address: 00:0A:3A:83:76:DA ACL MTU: 1021:8 SCO MTU: 64:1 HCI Ver: 2.1 (0x4) HCI Rev: 0x5184 LMP Ver: 2.1 (0x4) LMP Subver: 0x420e Manufacturer: Broadcom Corporation (15) Firmware 132.66 / 14 Does this mean that the adapter cannot possibly work correctly in anything less than a 2.6.27 kernel? Because it clearly *isn't* working correctly at the moment: # hciconfig hci0 name Can't read local name on hci0: Input/output error (5) # hciconfig hci0 class Can't read class of device on hci0: Input/output error (5) # hciconfig hci0 voice Can't read voice setting on hci0: Input/output error (5) # hciconfig hci0 iac Failed to read IAC from hci0: Input/output error etc. According to lsusb, this device is actually a USB hub with several other devices attached to it: $ /sbin/lsusb ... Bus 004 Device 018: ID 050d:016a Belkin Components Bus 004 Device 017: ID 0a5c:4503 Broadcom Corp. Bus 004 Device 016: ID 0a5c:4502 Broadcom Corp. Bus 004 Device 015: ID 0a5c:4500 Broadcom Corp. ... usb 4-1: new full speed USB device using uhci_hcd and address 15 usb 4-1: configuration #1 chosen from 1 choice hub 4-1:1.0: USB hub found hub 4-1:1.0: 3 ports detected usb 4-1.1: new full speed USB device using uhci_hcd and address 16 usb 4-1.1: configuration #1 chosen from 1 choice input: HID 0a5c:4502 as /class/input/input12 input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-1.1 usb 4-1.2: new full speed USB device using uhci_hcd and address 17 usb 4-1.2: configuration #1 chosen from 1 choice input: HID 0a5c:4503 as /class/input/input13 input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-1.2 usb 4-1.3: new full speed USB device using uhci_hcd and address 18 usb 4-1.3: configuration #1 chosen from 1 choice Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb Here are the device descriptors: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=12 MxCh= 3 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0a5c ProdID=4500 Rev= 1.00 S: Manufacturer=Broadcom S: Product=BCM2046B1 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 94mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=04 Lev=02 Prnt=15 Port=00 Cnt=01 Dev#= 16 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0a5c ProdID=4502 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=04 Lev=02 Prnt=15 Port=01 Cnt=02 Dev#= 17 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0a5c ProdID=4503 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms T: Bus=04 Lev=02 Prnt=15 Port=02 Cnt=03 Dev#= 18 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=016a Rev= 3.88 S: Manufacturer=Broadcom Corp S: Product=BLUETOOTH USB +EDR ADAPTER v2.1 UHE S: SerialNumber=000A3A8376DA C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Obviously I would like to get this adapter working properly, so please let me know if there is anything that I can do to help. (Apart from fry my e1000/e1000e network adapters, that is ;-).) Cheers, Chris