Return-Path: Date: Tue, 30 Dec 2008 08:18:08 +0200 (IST) Message-Id: <200812300618.mBU6I8lU020754@indigo.cs.bgu.ac.il> From: "eial@cs.bgu.ac.il" To: "eial@cs.bgu.ac.il" Cc: linux-bluetooth@vger.kernel.org Subject: Re: can't seem to be able to get bluez working with motorola H500 headset MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 In-Reply-To: <200812251309.mBPD9Xqm011800@indigo.cs.bgu.ac.il> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: no one can help me on this issue? On Thu 25 Dec 15:09 2008 eial@cs.bgu.ac.il wrote: > > hello, I got a gentoo 64 bit os, with kernel 2.6.27, I'm trying to make my motorola h500 work but after starting the service and the headset, scanning after the headsets wont return findings... > > got the following installed bluez programs: > bluez-utils-3.36, bluez-libs-3.36. > > here is my relevant .config section > CONFIG_BT=y > CONFIG_BT_L2CAP=m > CONFIG_BT_SCO=m > CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > CONFIG_BT_HIDP=m > > # > # Bluetooth device drivers > # > CONFIG_BT_HCIBTUSB=m > CONFIG_BT_HCIBTSDIO=m > CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > CONFIG_BT_HCIUART_LL=y > CONFIG_BT_HCIBCM203X=m > CONFIG_BT_HCIBPA10X=m > CONFIG_BT_HCIBFUSB=m > CONFIG_BT_HCIVHCI=m > # CONFIG_AF_RXRPC is not set > > here is lsusb output: > Bus 003 Device 005: ID 0a5c:4500 Broadcom Corp. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 Full speed (or root) hub > bMaxPacketSize0 8 > idVendor 0x0a5c Broadcom Corp. > idProduct 0x4500 > bcdDevice 1.00 > iManufacturer 1 Broadcom > iProduct 2 BCM2046B1 > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 94mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 Full speed (or root) hub > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0001 1x 1 bytes > bInterval 255 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 3 > wHubCharacteristic 0x0004 > Ganged power switching > Compound device > Ganged overcurrent protection > bPwrOn2PwrGood 50 * 2 milli seconds > bHubContrCurrent 100 milli Ampere > DeviceRemovable 0x0e > PortPwrCtrlMask 0xff > Hub Port Status: > Port 1: 0000.0103 power enable connect > Port 2: 0000.0103 power enable connect > Port 3: 0000.0100 power > Device Status: 0x0001 > Self Powered > > here are the config files: > # Configuration file for the audio service > > # This section contains options which are not specific to any > # particular interface > [General] > > # Switch to master role for incoming connections (defaults to true) > #Master=true > > # If we want to disable support for specific services > # Defaults to supporting all implemented services > #Disable=Control,Source > > # SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA) > # Defaults to HCI > #SCORouting=PCM > > # Headset interface specific options (i.e. options which affect how the audio > # service interacts with remote headset devices) > [Headset] > > # Set to true to support HFP (in addition to HSP only which is the default) > # Defaults to false > HFP=false > > # HFP Gateway features > # Defaults to false > 3WayCalling=false > EchoCancelNoiseCancel=false > VoiceRecognition=false > InBandRingtone=false > VoiceTags=false > RejectingCalls=false > EnhancedCallStatus=false > EnhancedCallControl=false > ExtendedErrorResultCodes=false > > # Just an example of potential config options for the other interfaces > #[A2DP] > #SBCSources=1 > #MPEG12Sources=0 > # > # HCI daemon configuration file. > # > > # HCId options > options { > # Automatically initialize new devices > autoinit yes; > > # Security Manager mode > # none - Security manager disabled > # auto - Use local PIN for incoming connections > # user - Always ask user for a PIN > # > security auto; > > # Pairing mode > # none - Pairing disabled > # multi - Allow pairing with already paired devices > # once - Pair once and deny successive attempts > pairing multi; > > # Default PIN code for incoming connections > passkey "0000"; > } > > # Default settings for HCI devices > device { > # Local device name > # %d - device id > # %h - host name > name "BlueZ (%d)"; > > # Local device class > class 0x000100; > > # Default packet type > #pkt_type DH1,DM1,HV1; > > # Inquiry and Page scan > iscan enable; pscan enable; > > # Default link mode > # none - no specific policy > # accept - always accept incoming connections > # master - become master on incoming connections, > # deny role switch on outgoing connections > lm accept; > > # Default link policy > # none - no specific policy > # rswitch - allow role switch > # hold - allow hold mode > # sniff - allow sniff mode > # park - allow park mode > lp rswitch,hold,sniff,park; > } > # Configuration file for the input service > > # This section contains options which are not specific to any > # particular interface > [General] > > # Set idle timeout (in minutes) before the connection will > # be disconnect (defaults to 0 for no timeout) > #IdleTimeout=30 > # Configuration file for the network service > > # This section contains options which are not specific to any > # particular interface > [General] > > # If we want to disable support for specific services > # Defaults to supporting all implemented services > #Disable=Connection,Server > > # Disable link encryption: default=false > #DisableSecurity=true > > [PANU Role] > > # Network interface name for PANU for connections. default:bnep%d > # (up to 16 characters) > #Interface= > > # PAN user connection interface up script. default:none > Script=avahi-autoipd > > [GN Role] > > # Network Interface name for Group Network server. default:pan0 > #Interface= > > # Group Network connection interface up script. default:none > Script=avahi-autoipd > > [NAP Role] > > # Network Interface name for Network Access Point server. default:pan1 > #Interface= > > # Network Access Point connection interface up script. default:none > Script=dhclient > # > # RFCOMM configuration file. > # > > #rfcomm0 { > # # Automatically bind the device at startup > # bind no; > # > # # Bluetooth address of the device > # device 11:22:33:44:55:66; > # > # # RFCOMM channel for the connection > # channel 1; > # > # # Description of the connection > # comment "Example Bluetooth device"; > #} > > anymore needed data I'll provide, just ask, thanks in advance for the help. > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >