Return-Path: Date: Tue, 6 Jan 2009 11:01:10 +0200 (IST) Message-Id: <200901060901.n0691A06027348@indigo.cs.bgu.ac.il> From: "eial@cs.bgu.ac.il" To: linux-bluetooth@vger.kernel.org Subject: Re: can't seem to be able to get bluez working with motorola H500 headset MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 In-Reply-To: <200812300618.mBU6I8lU020754@indigo.cs.bgu.ac.il> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: again sorry for the bump, I could really use some help with this... On Tue 30 Dec 8:18 2008 eial@cs.bgu.ac.il wrote: > no one can help me on this issue? > > On Thu 25 Dec 15:09 2008 eial@cs.bgu.ac.il wrote: > > > > hello, I got a gentoo 64 bit os, with kernel 2.6.27, I'm trying to make my motorola h500 work but after starting the service and the headset, scanning after the headsets wont return findings... > > > > got the following installed bluez programs: > > bluez-utils-3.36, bluez-libs-3.36. > > > > here is my relevant .config section > > CONFIG_BT=y > > CONFIG_BT_L2CAP=m > > CONFIG_BT_SCO=m > > CONFIG_BT_RFCOMM=m > > CONFIG_BT_RFCOMM_TTY=y > > CONFIG_BT_BNEP=m > > CONFIG_BT_BNEP_MC_FILTER=y > > CONFIG_BT_BNEP_PROTO_FILTER=y > > CONFIG_BT_HIDP=m > > > > # > > # Bluetooth device drivers > > # > > CONFIG_BT_HCIBTUSB=m > > CONFIG_BT_HCIBTSDIO=m > > CONFIG_BT_HCIUART=m > > CONFIG_BT_HCIUART_H4=y > > CONFIG_BT_HCIUART_BCSP=y > > CONFIG_BT_HCIUART_LL=y > > CONFIG_BT_HCIBCM203X=m > > CONFIG_BT_HCIBPA10X=m > > CONFIG_BT_HCIBFUSB=m > > CONFIG_BT_HCIVHCI=m > > # CONFIG_AF_RXRPC is not set > > > > here is lsusb output: > > Bus 003 Device 005: ID 0a5c:4500 Broadcom Corp. > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 8 > > idVendor 0x0a5c Broadcom Corp. > > idProduct 0x4500 > > bcdDevice 1.00 > > iManufacturer 1 Broadcom > > iProduct 2 BCM2046B1 > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 94mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0001 1x 1 bytes > > bInterval 255 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 3 > > wHubCharacteristic 0x0004 > > Ganged power switching > > Compound device > > Ganged overcurrent protection > > bPwrOn2PwrGood 50 * 2 milli seconds > > bHubContrCurrent 100 milli Ampere > > DeviceRemovable 0x0e > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0103 power enable connect > > Port 2: 0000.0103 power enable connect > > Port 3: 0000.0100 power > > Device Status: 0x0001 > > Self Powered > > > > here are the config files: > > # Configuration file for the audio service > > > > # This section contains options which are not specific to any > > # particular interface > > [General] > > > > # Switch to master role for incoming connections (defaults to true) > > #Master=true > > > > # If we want to disable support for specific services > > # Defaults to supporting all implemented services > > #Disable=Control,Source > > > > # SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA) > > # Defaults to HCI > > #SCORouting=PCM > > > > # Headset interface specific options (i.e. options which affect how the audio > > # service interacts with remote headset devices) > > [Headset] > > > > # Set to true to support HFP (in addition to HSP only which is the default) > > # Defaults to false > > HFP=false > > > > # HFP Gateway features > > # Defaults to false > > 3WayCalling=false > > EchoCancelNoiseCancel=false > > VoiceRecognition=false > > InBandRingtone=false > > VoiceTags=false > > RejectingCalls=false > > EnhancedCallStatus=false > > EnhancedCallControl=false > > ExtendedErrorResultCodes=false > > > > # Just an example of potential config options for the other interfaces > > #[A2DP] > > #SBCSources=1 > > #MPEG12Sources=0 > > # > > # HCI daemon configuration file. > > # > > > > # HCId options > > options { > > # Automatically initialize new devices > > autoinit yes; > > > > # Security Manager mode > > # none - Security manager disabled > > # auto - Use local PIN for incoming connections > > # user - Always ask user for a PIN > > # > > security auto; > > > > # Pairing mode > > # none - Pairing disabled > > # multi - Allow pairing with already paired devices > > # once - Pair once and deny successive attempts > > pairing multi; > > > > # Default PIN code for incoming connections > > passkey "0000"; > > } > > > > # Default settings for HCI devices > > device { > > # Local device name > > # %d - device id > > # %h - host name > > name "BlueZ (%d)"; > > > > # Local device class > > class 0x000100; > > > > # Default packet type > > #pkt_type DH1,DM1,HV1; > > > > # Inquiry and Page scan > > iscan enable; pscan enable; > > > > # Default link mode > > # none - no specific policy > > # accept - always accept incoming connections > > # master - become master on incoming connections, > > # deny role switch on outgoing connections > > lm accept; > > > > # Default link policy > > # none - no specific policy > > # rswitch - allow role switch > > # hold - allow hold mode > > # sniff - allow sniff mode > > # park - allow park mode > > lp rswitch,hold,sniff,park; > > } > > # Configuration file for the input service > > > > # This section contains options which are not specific to any > > # particular interface > > [General] > > > > # Set idle timeout (in minutes) before the connection will > > # be disconnect (defaults to 0 for no timeout) > > #IdleTimeout=30 > > # Configuration file for the network service > > > > # This section contains options which are not specific to any > > # particular interface > > [General] > > > > # If we want to disable support for specific services > > # Defaults to supporting all implemented services > > #Disable=Connection,Server > > > > # Disable link encryption: default=false > > #DisableSecurity=true > > > > [PANU Role] > > > > # Network interface name for PANU for connections. default:bnep%d > > # (up to 16 characters) > > #Interface= > > > > # PAN user connection interface up script. default:none > > Script=avahi-autoipd > > > > [GN Role] > > > > # Network Interface name for Group Network server. default:pan0 > > #Interface= > > > > # Group Network connection interface up script. default:none > > Script=avahi-autoipd > > > > [NAP Role] > > > > # Network Interface name for Network Access Point server. default:pan1 > > #Interface= > > > > # Network Access Point connection interface up script. default:none > > Script=dhclient > > # > > # RFCOMM configuration file. > > # > > > > #rfcomm0 { > > # # Automatically bind the device at startup > > # bind no; > > # > > # # Bluetooth address of the device > > # device 11:22:33:44:55:66; > > # > > # # RFCOMM channel for the connection > > # channel 1; > > # > > # # Description of the connection > > # comment "Example Bluetooth device"; > > #} > > > > anymore needed data I'll provide, just ask, thanks in advance for the help. > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >