Return-Path: Date: Sat, 28 Mar 2009 02:10:06 +0530 (IST) From: pavan_savoy@indiatimes.com To: Nick Pelly Cc: linux-bluetooth@vger.kernel.org Message-ID: <1831784371.90681238186406345.JavaMail.root@mbv7.indiatimes.com> In-Reply-To: <35c90d960903261839q500b755cuc75c40e96e973225@mail.gmail.com> Subject: Re: a2dp connection of HT820 vs. BT620s MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hey Nick, I did post this on the android-group as well, I mentioned I get a "write blocked for ** msecs" when audio gap occurs. Also, I tested Jabra with ubuntu's 3.16 bluez, it sounds funny [something to do with frequency, I suppose..], but no audio gap, basically same output as in Motorola head-set. Also please elaborate on what part of Android plug-in do you suspect ? I would want to take a look into it. regards, Pavan ----- Original Message ----- From: Nick Pelly To: pavan savoy Cc: linux-bluetooth@vger.kernel.org Sent: Fri, 27 Mar 2009 07:09:11 +0530 (IST) Subject: Re: a2dp connection of HT820 vs. BT620s On 3/26/09, pavan_savoy@indiatimes.com wrote: > Hi, > > I am using android [bluez-3.36] and using a2dp over it. I observe that I get a lot of audio gaps, when I connect to headset "Jabra BT620s". > > However when I connect to "Motorola HT820", everything seems fine, audio streaming is good. > I have the hcidump, when the Jabra was connected, and it kind of reads the same in terms of frequency, Stereo, block size as when connected to Motorola headset > > What could be the problem ? Any inputs would help. While I suspect this issue is specific to the Android a2dp audio plugin, I would also be interested in hearing if the pulseaudio or alsa plugin's have issues with Jabra headsets as Pavan describes. Nick -- Exclusive spy camera shots of the Tata Nano only on ZigWheels.com http://www.zigwheels.com/tata-nano/