Return-Path: Subject: [PATCH] Added support for Atheros AR300x Bluetooth Chip From: suraj To: CC: , , Content-Type: text/plain; charset="UTF-8" Date: Mon, 15 Mar 2010 10:31:36 +0530 Message-ID: <1268629296.21425.23.camel@atheros013-desktop> MIME-Version: 1.0 List-ID: This protocol implements support for power management feature provided by AR300x chip. This lets the controller chip go to sleep mode if there is no Bluetooth activity for some time. It then wakes up the chip in case of a Bluetooth activity. Signed-off-by: Suraj --- drivers/bluetooth/Kconfig | 11 ++ drivers/bluetooth/Makefile | 1 + drivers/bluetooth/hci_ath.c | 353 +++++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/hci_ldisc.c | 6 + drivers/bluetooth/hci_uart.h | 8 +- 5 files changed, 378 insertions(+), 1 deletions(-) create mode 100755 drivers/bluetooth/hci_ath.c diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 058fbcc..81abeff 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -58,6 +58,17 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. +config BT_HCIUART_ATH + bool "Atheros AR300x Board support" + depends on BT_HCIUART + help + HCIATH (HCI Atheros) is a serial protocol for communication + between Bluetooth device and host with support for Atheros AR300x + power management feature. This protocol is required for + serial Bluetooth devices that are based on Atheros AR300x chips. + + Say Y here to compile support for HCIATH protocol. + config BT_HCIUART_LL bool "HCILL protocol support" depends on BT_HCIUART diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 7e5aed5..1481faa 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -26,4 +26,5 @@ hci_uart-y := hci_ldisc.o hci_uart-$(CONFIG_BT_HCIUART_H4) += hci_h4.o hci_uart-$(CONFIG_BT_HCIUART_BCSP) += hci_bcsp.o hci_uart-$(CONFIG_BT_HCIUART_LL) += hci_ll.o +hci_uart-$(CONFIG_BT_HCIUART_ATH) += hci_ath.o hci_uart-objs := $(hci_uart-y) diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c new file mode 100755 index 0000000..13e4404 --- /dev/null +++ b/drivers/bluetooth/hci_ath.c @@ -0,0 +1,353 @@ +/* + * Copyright (c) 2009-2010 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "hci_uart.h" + + +/* HCIATH receiver States */ +#define HCIATH_W4_PACKET_TYPE 0 +#define HCIATH_W4_EVENT_HDR 1 +#define HCIATH_W4_ACL_HDR 2 +#define HCIATH_W4_SCO_HDR 3 +#define HCIATH_W4_DATA 4 + +struct ath_struct { + struct hci_uart *hu; + unsigned int rx_state; + unsigned int rx_count; + unsigned int cur_sleep; + + spinlock_t hciath_lock; + struct sk_buff *rx_skb; + struct sk_buff_head txq; + wait_queue_head_t wqevt; + struct work_struct ctxtsw; +}; + +int ath_wakeup_ar3001(struct tty_struct *tty) +{ + struct termios settings; + int status = 0x00; + mm_segment_t oldfs; + status = tty->driver->ops->tiocmget(tty, NULL); + + if ((status & TIOCM_CTS)) + return status; + + oldfs = get_fs(); + set_fs(KERNEL_DS); + n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); + + settings.c_cflag &= ~CRTSCTS; + n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + set_fs(oldfs); + status = tty->driver->ops->tiocmget(tty, NULL); + + /* Wake up board */ + tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS); + mdelay(20); + + status = tty->driver->ops->tiocmget(tty, NULL); + + tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00); + mdelay(20); + + status = tty->driver->ops->tiocmget(tty, NULL); + oldfs = get_fs(); + set_fs(KERNEL_DS); + n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); + + settings.c_cflag |= CRTSCTS; + n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + set_fs(oldfs); + return status; +} + +static void ath_context_switch(struct work_struct *work) +{ + int status; + struct ath_struct *ath; + struct hci_uart *hu; + struct tty_struct *tty; + + ath = container_of(work, struct ath_struct, ctxtsw); + + hu = ath->hu; + tty = hu->tty; + + /* verify and wake up controller */ + if (ath->cur_sleep) { + + status = ath_wakeup_ar3001(tty); + if (!(status & TIOCM_CTS)) + return; + } + + /* Ready to send Data */ + clear_bit(HCI_UART_SENDING, &hu->tx_state); + hci_uart_tx_wakeup(hu); +} + +int ath_check_sleep_cmd(struct ath_struct *ath, unsigned char *packet) +{ + if (packet[0] == 0x04 && packet[1] == 0xFC) + ath->cur_sleep = packet[3]; + + return 0; +} + + +/* Initialize protocol */ +static int ath_open(struct hci_uart *hu) +{ + struct ath_struct *ath; + BT_DBG("hu %p", hu); + + ath = kzalloc(sizeof(*ath), GFP_ATOMIC); + if (!ath) + return -ENOMEM; + + skb_queue_head_init(&ath->txq); + spin_lock_init(&ath->hciath_lock); + + ath->cur_sleep = 0; + hu->priv = ath; + ath->hu = hu; + + init_waitqueue_head(&ath->wqevt); + INIT_WORK(&ath->ctxtsw, ath_context_switch); + return 0; +} + +/* Flush protocol data */ +static int ath_flush(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + BT_DBG("hu %p", hu); + skb_queue_purge(&ath->txq); + + return 0; +} + +/* Close protocol */ +static int ath_close(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + BT_DBG("hu %p", hu); + + skb_queue_purge(&ath->txq); + + if (ath->rx_skb) + kfree_skb(ath->rx_skb); + + wake_up_interruptible(&ath->wqevt); + hu->priv = NULL; + kfree(ath); + return 0; +} + +/* Enqueue frame for transmittion */ +static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct ath_struct *ath = hu->priv; + if (bt_cb(skb)->pkt_type == HCI_SCODATA_PKT) { + + /* Discard SCO packet.AR3001 does not support SCO over HCI */ + BT_DBG("SCO Packet over HCI received Dropping\n"); + kfree(skb); + return 0; + } + BT_DBG("hu %p skb %p", hu, skb); + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + + skb_queue_tail(&ath->txq, skb); + set_bit(HCI_UART_SENDING, &hu->tx_state); + + schedule_work(&ath->ctxtsw); + return 0; +} + +static struct sk_buff *ath_dequeue(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + struct sk_buff *skbuf; + + skbuf = skb_dequeue(&ath->txq); + if (skbuf != NULL) + ath_check_sleep_cmd(ath, &skbuf->data[1]); + + return skbuf; +} + +static inline int ath_check_data_len(struct ath_struct *ath, int len) +{ + register int room = skb_tailroom(ath->rx_skb); + BT_DBG("len %d room %d", len, room); + + if (len > room) { + BT_ERR("Data length is too large"); + kfree_skb(ath->rx_skb); + ath->rx_state = HCIATH_W4_PACKET_TYPE; + ath->rx_skb = NULL; + ath->rx_count = 0; + } else { + ath->rx_state = HCIATH_W4_DATA; + ath->rx_count = len; + return len; + } + + return 0; +} + +/* Recv data */ +static int ath_recv(struct hci_uart *hu, void *data, int count) +{ + struct ath_struct *ath = hu->priv; + register char *ptr; + struct hci_event_hdr *eh; + struct hci_acl_hdr *ah; + struct hci_sco_hdr *sh; + struct sk_buff *skbuf; + register int len, type, dlen; + + skbuf = NULL; + BT_DBG("hu %p count %d rx_state %d rx_count %d", hu, count, + ath->rx_state, ath->rx_count); + ptr = data; + while (count) { + if (ath->rx_count) { + + len = min_t(unsigned int, ath->rx_count, count); + memcpy(skb_put(ath->rx_skb, len), ptr, len); + ath->rx_count -= len; + count -= len; + ptr += len; + + if (ath->rx_count) + continue; + switch (ath->rx_state) { + case HCIATH_W4_DATA: + hci_recv_frame(ath->rx_skb); + ath->rx_state = HCIATH_W4_PACKET_TYPE; + ath->rx_skb = NULL; + ath->rx_count = 0; + continue; + case HCIATH_W4_EVENT_HDR: + eh = (struct hci_event_hdr *)ath->rx_skb->data; + BT_DBG("Event header: evt 0x%2.2x plen %d", + eh->evt, eh->plen); + ath_check_data_len(ath, eh->plen); + continue; + case HCIATH_W4_ACL_HDR: + ah = (struct hci_acl_hdr *)ath->rx_skb->data; + dlen = __le16_to_cpu(ah->dlen); + BT_DBG("ACL header: dlen %d", dlen); + ath_check_data_len(ath, dlen); + continue; + case HCIATH_W4_SCO_HDR: + sh = (struct hci_sco_hdr *)ath->rx_skb->data; + BT_DBG("SCO header: dlen %d", sh->dlen); + ath_check_data_len(ath, sh->dlen); + continue; + } + } + + /* HCIATH_W4_PACKET_TYPE */ + switch (*ptr) { + case HCI_EVENT_PKT: + BT_DBG("Event packet"); + ath->rx_state = HCIATH_W4_EVENT_HDR; + ath->rx_count = HCI_EVENT_HDR_SIZE; + type = HCI_EVENT_PKT; + break; + case HCI_ACLDATA_PKT: + BT_DBG("ACL packet"); + ath->rx_state = HCIATH_W4_ACL_HDR; + ath->rx_count = HCI_ACL_HDR_SIZE; + type = HCI_ACLDATA_PKT; + break; + case HCI_SCODATA_PKT: + BT_DBG("SCO packet"); + ath->rx_state = HCIATH_W4_SCO_HDR; + ath->rx_count = HCI_SCO_HDR_SIZE; + type = HCI_SCODATA_PKT; + break; + default: + BT_ERR("Unknown HCI packet type %2.2x", (__u8) *ptr); + hu->hdev->stat.err_rx++; + ptr++; + count--; + continue; + }; + ptr++; + count--; + + /* Allocate packet */ + ath->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); + if (!ath->rx_skb) { + BT_ERR("Can't allocate mem for new packet"); + ath->rx_state = HCIATH_W4_PACKET_TYPE; + ath->rx_count = 0; + return -ENOMEM; + } + ath->rx_skb->dev = (void *)hu->hdev; + bt_cb(ath->rx_skb)->pkt_type = type; + } return count; +} + +static struct hci_uart_proto athp = { + .id = HCI_UART_ATH, + .open = ath_open, + .close = ath_close, + .recv = ath_recv, + .enqueue = ath_enqueue, + .dequeue = ath_dequeue, + .flush = ath_flush, +}; + +int ath_init(void) +{ + int err = hci_uart_register_proto(&athp); + if (!err) + BT_INFO("HCIATH protocol initialized"); + + else + BT_ERR("HCIATH protocol registration failed"); + return err; +} + +int ath_deinit(void) +{ + return hci_uart_unregister_proto(&athp); +} diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 76a1abb..7dd76d1 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -542,6 +542,9 @@ static int __init hci_uart_init(void) #ifdef CONFIG_BT_HCIUART_LL ll_init(); #endif +#ifdef CONFIG_BT_HCIUART_ATH + ath_init(); +#endif return 0; } @@ -559,6 +562,9 @@ static void __exit hci_uart_exit(void) #ifdef CONFIG_BT_HCIUART_LL ll_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_ATH + ath_deinit(); +#endif /* Release tty registration of line discipline */ if ((err = tty_unregister_ldisc(N_HCI))) diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 50113db..385537f 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -33,13 +33,14 @@ #define HCIUARTGETDEVICE _IOR('U', 202, int) /* UART protocols */ -#define HCI_UART_MAX_PROTO 5 +#define HCI_UART_MAX_PROTO 6 #define HCI_UART_H4 0 #define HCI_UART_BCSP 1 #define HCI_UART_3WIRE 2 #define HCI_UART_H4DS 3 #define HCI_UART_LL 4 +#define HCI_UART_ATH 5 struct hci_uart; @@ -91,3 +92,8 @@ int bcsp_deinit(void); int ll_init(void); int ll_deinit(void); #endif + +#ifdef CONFIG_BT_HCIUART_ATH +int ath_init(void); +int ath_deinit(void); +#endif -- 1.6.3.3