Return-Path: From: Jose Antonio Santos Cadenas To: linux-bluetooth@vger.kernel.org Cc: Jose Antonio Santos Cadenas Subject: [PATCH 6/6] Change end of line from DOS to UNIX Date: Fri, 7 May 2010 00:27:12 +0200 Message-Id: <1273184832-8265-6-git-send-email-santoscadenas@gmail.com> In-Reply-To: <1273184832-8265-1-git-send-email-santoscadenas@gmail.com> References: <1273184832-8265-1-git-send-email-santoscadenas@gmail.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Files tools/ubcsp.c and tools/ubcsp.h had DOS end of line now they are changed to UNIX end of line --- tools/ubcsp.c | 2360 ++++++++++++++++++++++++++++---------------------------- tools/ubcsp.h | 414 +++++----- 2 files changed, 1387 insertions(+), 1387 deletions(-) diff --git a/tools/ubcsp.c b/tools/ubcsp.c index 93b8c0f..3d4cd99 100644 --- a/tools/ubcsp.c +++ b/tools/ubcsp.c @@ -1,1180 +1,1180 @@ -/* - * - * BlueZ - Bluetooth protocol stack for Linux - * - * Copyright (C) 2000-2005 CSR Ltd. - * - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -#ifdef HAVE_CONFIG_H -#include -#endif - -/*****************************************************************************/ -/*****************************************************************************/ -/*****************************************************************************/ -/** **/ -/** ubcsp,c **/ -/** **/ -/** MicroBCSP - a very low cost implementation of the BCSP protocol **/ -/** **/ -/*****************************************************************************/ - -#include "ubcsp.h" - -#if SHOW_PACKET_ERRORS || SHOW_LE_STATES -#include -#include -#endif - -static uint16 ubcsp_calc_crc (uint8 ch, uint16 crc); -static uint16 ubcsp_crc_reverse (uint16); - -/*****************************************************************************/ -/** **/ -/** Constant Data - ROM **/ -/** **/ -/*****************************************************************************/ - -/* This is the storage for the link establishment messages */ - -static const uint8 ubcsp_le_buffer[4][4] = - { - { 0xDA, 0xDC, 0xED, 0xED }, - { 0xAC, 0xAF, 0xEF, 0xEE }, - { 0xAD, 0xEF, 0xAC, 0xED }, - { 0xDE, 0xAD, 0xD0, 0xD0 }, - }; - -/* These are the link establishment headers */ -/* The two version are for the CRC and non-CRC varients */ - -#if UBCSP_CRC -static const uint8 ubcsp_send_le_header[4] = - { - 0x40, 0x41, 0x00, 0x7E - }; -#else -static const uint8 ubcsp_send_le_header[4] = - { - 0x00, 0x41, 0x00, 0xBE - }; -#endif - -/*****************************************************************************/ -/** **/ -/** Static Data - RAM **/ -/** **/ -/*****************************************************************************/ - -/* This is the storage for all state data for ubcsp */ - -static struct ubcsp_configuration ubcsp_config; - -/* This is the ACK packet header - this will be overwritten when - we create an ack packet */ - -static uint8 ubcsp_send_ack_header[4] = - { - 0x00, 0x00, 0x00, 0x00 - }; - -/* This is the deslip lookup table */ - -static const uint8 ubcsp_deslip[2] = - { - SLIP_FRAME, SLIP_ESCAPE, - }; - -/* This is a state machine table for link establishment */ - -static uint8 next_le_packet[16] = - { - ubcsp_le_sync, // uninit - ubcsp_le_conf, // init - ubcsp_le_none, // active - ubcsp_le_none, - ubcsp_le_sync_resp, // sync_resp - ubcsp_le_sync_resp, - ubcsp_le_none, - ubcsp_le_none, - ubcsp_le_none, // conf_resp - ubcsp_le_conf_resp, - ubcsp_le_conf_resp, - ubcsp_le_none, - }; - -/* This is the storage required for building send and crc data */ - -static uint8 ubcsp_send_header[4]; -static uint8 ubcsp_send_crc[2]; - -/* This is where the receive header is stored before the payload arrives */ - -static uint8 ubcsp_receive_header[4]; - -/*****************************************************************************/ -/** **/ -/** Code - ROM or RAM **/ -/** **/ -/*****************************************************************************/ - -/*****************************************************************************/ -/** **/ -/** ubcsp_initialize **/ -/** **/ -/** This initializes the state of the ubcsp engine to a known values **/ -/** **/ -/*****************************************************************************/ - -void ubcsp_initialize (void) -{ - ubcsp_config.ack_number = 0; - ubcsp_config.sequence_number = 0; - ubcsp_config.send_ptr = 0; - ubcsp_config.send_size = 0; - ubcsp_config.receive_index = -4; - - ubcsp_config.delay = 0; - -#if SHOW_LE_STATES - printf ("Hello Link Uninitialized\n"); -#endif - - ubcsp_config.link_establishment_state = ubcsp_le_uninitialized; - ubcsp_config.link_establishment_packet = ubcsp_le_sync; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_send_packet **/ -/** **/ -/** This sends a packet structure for sending to the ubcsp engine **/ -/** This can only be called when the activity indication from ubcsp_poll **/ -/** indicates that a packet can be sent with UBCSP_PACKET_SENT **/ -/** **/ -/*****************************************************************************/ - -void ubcsp_send_packet (struct ubcsp_packet *send_packet) -{ - /* Initialize the send data to the packet we want to send */ - - ubcsp_config.send_packet = send_packet; - - /* we cannot send the packet at the moment - when we can at the moment, just set things to 0 */ - - ubcsp_config.send_size = 0; - ubcsp_config.send_ptr = 0; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_receive_packet **/ -/** **/ -/** This sends a packet structure for receiving to the ubcsp engine **/ -/** This can only be called when the activity indication from ubcsp_poll **/ -/** indicates that a packet can be sent with UBCSP_PACKET_RECEIVED **/ -/** **/ -/*****************************************************************************/ - -void ubcsp_receive_packet (struct ubcsp_packet *receive_packet) -{ - /* Initialize the receive data to the packet we want to receive */ - - ubcsp_config.receive_packet = receive_packet; - - /* setup to receive the header first */ - - ubcsp_config.receive_index = -4; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_calc_crc **/ -/** **/ -/** Takes the next 8 bit value ch, and updates the crc with this value **/ -/** **/ -/*****************************************************************************/ - - -#ifdef UBCSP_CRC - -static uint16 ubcsp_calc_crc (uint8 ch, uint16 crc) -{ - /* Calculate the CRC using the above 16 entry lookup table */ - - static const uint16 crc_table[] = - { - 0x0000, 0x1081, 0x2102, 0x3183, - 0x4204, 0x5285, 0x6306, 0x7387, - 0x8408, 0x9489, 0xa50a, 0xb58b, - 0xc60c, 0xd68d, 0xe70e, 0xf78f - }; - - /* Do this four bits at a time - more code, less space */ - - crc = (crc >> 4) ^ crc_table[(crc ^ ch) & 0x000f]; - crc = (crc >> 4) ^ crc_table[(crc ^ (ch >> 4)) & 0x000f]; - - return crc; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_crc_reverse **/ -/** **/ -/** Reserves the bits in crc and returns the new value **/ -/** **/ -/*****************************************************************************/ - -static uint16 ubcsp_crc_reverse (uint16 crc) -{ - int32 - b, - rev; - - /* Reserse the bits to compute the actual CRC value */ - - for (b = 0, rev=0; b < 16; b++) - { - rev = rev << 1; - rev |= (crc & 1); - crc = crc >> 1; - } - - return rev; -} - -#endif - -/*****************************************************************************/ -/** **/ -/** ubcsp_put_slip_uart **/ -/** **/ -/** Outputs a single octet to the uart **/ -/** If the octet needs to be escaped, then output the escape value **/ -/** and then store the second octet to be output later **/ -/** **/ -/*****************************************************************************/ - -static void ubcsp_put_slip_uart (uint8 ch) -{ - /* output a single UART octet */ - - /* If it needs to be escaped, then output the escape octet - and set the send_slip_escape so that the next time we - output the second octet for the escape correctly. - This is done right at the top of ubcsp_poll */ - - if (ch == SLIP_FRAME) - { - put_uart (SLIP_ESCAPE); - ubcsp_config.send_slip_escape = SLIP_ESCAPE_FRAME; - } - else if (ch == SLIP_ESCAPE) - { - put_uart (SLIP_ESCAPE); - ubcsp_config.send_slip_escape = SLIP_ESCAPE_ESCAPE; - } - else - { - /* Not escaped, so just output octet */ - - put_uart (ch); - } -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_which_le_payload **/ -/** **/ -/** Check the payload of this packet, and determine which of the four **/ -/** link establishment packets this was. **/ -/** Can return 5 if it is not a valid link establishment packet **/ -/** **/ -/*****************************************************************************/ - -static uint32 ubcsp_which_le_payload (const uint8 *payload) -{ - static int32 - octet, - loop; - - /* Search through the various link establishment payloads to find - which one we have received */ - - for (loop = 0; loop < 4; loop ++) - { - for (octet = 0; octet < 4; octet ++) - { - if (payload[octet] != ubcsp_le_buffer[loop][octet]) - { - /* Bad match, just to loop again */ - goto bad_match_loop; - } - } - - /* All the octets matched, return the value */ - - return loop; - - /* Jumps out of octet loop if we got a bad match */ -bad_match_loop: - {} - } - - /* Non of the link establishment payloads matched - return invalid value */ - - return 5; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_recevied_packet **/ -/** **/ -/** This function is called when we have a SLIP END octet and a full **/ -/** packet header and possibly data in the receive packet **/ -/** **/ -/*****************************************************************************/ - -static uint8 ubcsp_recevied_packet (void) -{ - static uint8 - receive_crc, - receive_seq, - receive_ack, - activity; - -#if UBCSP_CRC - static int32 - loop; - - static uint16 - crc; -#endif - - static uint16 - length; - - /* Keep track of what activity this received packet will cause */ - - activity = 0; - - /*** Do all error checks that we can ***/ - - /* First check the header checksum */ - - if (((ubcsp_receive_header[0] + ubcsp_receive_header[1] + ubcsp_receive_header[2] + ubcsp_receive_header[3]) & 0xff) != 0xff) - { - /* Header Checksum Error */ - -#if SHOW_PACKET_ERRORS - printf ("\n######################## Header Checksum Error %02X %02X %02X %02X\n", - ubcsp_receive_header[0], - ubcsp_receive_header[1], - ubcsp_receive_header[2], - ubcsp_receive_header[3]); -#endif - - /* If we have a header checksum error, send an ack in return - this gets a packet to be resent as quickly as possible */ - - ubcsp_config.send_ack = 1; - - return activity; - } - - /* Decode the received packets header */ - - ubcsp_config.receive_packet->reliable = (ubcsp_receive_header[0] & 0x80) >> 7; - - receive_crc = (ubcsp_receive_header[0] & 0x40) >> 6; - receive_ack = (ubcsp_receive_header[0] & 0x38) >> 3; - receive_seq = (ubcsp_receive_header[0] & 0x07); - - ubcsp_config.receive_packet->channel = (ubcsp_receive_header[1] & 0x0f); - - length = - ((ubcsp_receive_header[1] & 0xf0) >> 4) | - (ubcsp_receive_header[2] << 4); - -#if SHOW_PACKET_ERRORS - if (ubcsp_config.receive_packet->reliable) - { - printf (" : %10d Recv SEQ: %d ACK %d\n", - GetTickCount () % 100000, - receive_seq, - receive_ack); - } - else if (ubcsp_config.receive_packet->channel != 1) - { - printf (" : %10d Recv ACK %d\n", - GetTickCount () % 100000, - receive_ack); - } -#endif - - /* Check for length errors */ - -#if UBCSP_CRC - if (receive_crc) - { - /* If this packet had a CRC, then the length of the payload - should be 2 less than the received size of the payload */ - - if (length + 2 != ubcsp_config.receive_index) - { - /* Slip Length Error */ - -#if SHOW_PACKET_ERRORS - printf ("\n######################## Slip Length Error (With CRC) %d,%d\n", length, ubcsp_config.receive_index - 2); -#endif - - /* If we have a payload length error, send an ack in return - this gets a packet to be resent as quickly as possible */ - - ubcsp_config.send_ack = 1; - return activity; - } - - /* We have a CRC at the end of this packet */ - - ubcsp_config.receive_index -= 2; - - /* Calculate the packet CRC */ - - crc = 0xffff; - - /* CRC the packet header */ - - for (loop = 0; loop < 4; loop ++) - { - crc = ubcsp_calc_crc (ubcsp_receive_header[loop], crc); - } - - /* CRC the packet payload - without the CRC bytes */ - - for (loop = 0; loop < ubcsp_config.receive_index; loop ++) - { - crc = ubcsp_calc_crc (ubcsp_config.receive_packet->payload[loop], crc); - } - - /* Reverse the CRC */ - - crc = ubcsp_crc_reverse (crc); - - /* Check the CRC is correct */ - - if - ( - (((crc & 0xff00) >> 8) != ubcsp_config.receive_packet->payload[ubcsp_config.receive_index]) || - ((crc & 0xff) != ubcsp_config.receive_packet->payload[ubcsp_config.receive_index + 1]) - ) - { -#if SHOW_PACKET_ERRORS - printf ("\n######################## CRC Error\n"); -#endif - - /* If we have a packet crc error, send an ack in return - this gets a packet to be resent as quickly as possible */ - - ubcsp_config.send_ack = 1; - return activity; - } - } - else - { -#endif - /* No CRC present, so just check the length of payload with that received */ - - if (length != ubcsp_config.receive_index) - { - /* Slip Length Error */ - -#if SHOW_PACKET_ERRORS - printf ("\n######################## Slip Length Error (No CRC) %d,%d\n", length, ubcsp_config.receive_index); -#endif - - /* If we have a payload length error, send an ack in return - this gets a packet to be resent as quickly as possible */ - - ubcsp_config.send_ack = 1; - return activity; - } -#if UBCSP_CRC - } -#endif - - /*** We have a fully formed packet having passed all data integrity checks ***/ - - /* Check if we have an ACK for the last packet we sent */ - - if (receive_ack != ubcsp_config.sequence_number) - { - /* Since we only have a window size of 1, if the ACK is not equal to SEQ - then the packet was sent */ - - if - ( - (ubcsp_config.send_packet) && - (ubcsp_config.send_packet->reliable) - ) - { - /* We had sent a reliable packet, so clear this packet - Then increament the sequence number for the next packet */ - - ubcsp_config.send_packet = 0; - ubcsp_config.sequence_number ++; - ubcsp_config.delay = 0; - - /* Notify the caller that we have SENT a packet */ - - activity |= UBCSP_PACKET_SENT; - } - } - - /*** Now we can concentrate of the packet we have received ***/ - - /* Check for Link Establishment packets */ - - if (ubcsp_config.receive_packet->channel == 1) - { - /* Link Establishment */ - - ubcsp_config.delay = 0; - - /* Find which link establishment packet this payload means - This could return 5, meaning none */ - - switch (ubcsp_which_le_payload (ubcsp_config.receive_packet->payload)) - { - case 0: - { - /* SYNC Recv'd */ - -#if SHOW_LE_STATES - printf ("Recv SYNC\n"); -#endif - - /* If we receive a SYNC, then we respond to it with a SYNC RESP - but only if we are not active. - If we are active, then we have a PEER RESET */ - - if (ubcsp_config.link_establishment_state < ubcsp_le_active) - { - ubcsp_config.link_establishment_resp = 1; - } - else - { - /* Peer reset !!!! */ - -#if SHOW_LE_STATES - printf ("\n\n\n\n\nPEER RESET\n\n"); -#endif - - /* Reinitialize the link */ - - ubcsp_initialize (); - - /* Tell the host what has happened */ - - return UBCSP_PEER_RESET; - } - break; - } - - case 1: - { - /* SYNC RESP Recv'd */ - -#if SHOW_LE_STATES - printf ("Recv SYNC RESP\n"); -#endif - - /* If we receive a SYNC RESP, push us into the initialized state */ - - if (ubcsp_config.link_establishment_state < ubcsp_le_initialized) - { -#if SHOW_LE_STATES - printf ("Link Initialized\n"); -#endif - ubcsp_config.link_establishment_state = ubcsp_le_initialized; - } - - break; - } - - case 2: - { - /* CONF Recv'd */ - -#if SHOW_LE_STATES - printf ("Recv CONF\n"); -#endif - - /* If we receive a CONF, and we are initialized or active - then respond with a CONF RESP */ - - if (ubcsp_config.link_establishment_state >= ubcsp_le_initialized) - { - ubcsp_config.link_establishment_resp = 2; - } - - break; - } - - case 3: - { - /* CONF RESP Recv'd */ - -#if SHOW_LE_STATES - printf ("Recv CONF RESP\n"); -#endif - - /* If we received a CONF RESP, then push us into the active state */ - - if (ubcsp_config.link_establishment_state < ubcsp_le_active) - { -#if SHOW_LE_STATES - printf ("Link Active\n"); -#endif - - ubcsp_config.link_establishment_state = ubcsp_le_active; - ubcsp_config.send_size = 0; - - return activity | UBCSP_PACKET_SENT; - } - - break; - } - } - - /* We have finished processing Link Establishment packets */ - } - else if (ubcsp_config.receive_index) - { - /* We have some payload data we need to process - but only if we are active - otherwise, we just ignore it */ - - if (ubcsp_config.link_establishment_state == ubcsp_le_active) - { - if (ubcsp_config.receive_packet->reliable) - { - /* If the packet we've just received was reliable - then send an ACK */ - - ubcsp_config.send_ack = 1; - - /* We the sequence number we received is the same as - the last ACK we sent, then we have received a packet in sequence */ - - if (receive_seq == ubcsp_config.ack_number) - { - /* Increase the ACK number - which will be sent in the next ACK - or normal packet we send */ - - ubcsp_config.ack_number ++; - - /* Set the values in the receive_packet structure, so the caller - knows how much data we have */ - - ubcsp_config.receive_packet->length = length; - ubcsp_config.receive_packet = 0; - - /* Tell the caller that we have received a packet, and that it - will be ACK'ed */ - - activity |= UBCSP_PACKET_RECEIVED | UBCSP_PACKET_ACK; - } - } - else - { - /* Set the values in the receive_packet structure, so the caller - knows how much data we have */ - - ubcsp_config.receive_packet->length = length; - ubcsp_config.receive_packet = 0; - - /* Tell the caller that we have received a packet */ - - activity |= UBCSP_PACKET_RECEIVED; - } - } - } - - /* Just return any activity that occured */ - - return activity; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_setup_packet **/ -/** **/ -/** This function is called to setup a packet to be sent **/ -/** This allows just a header, or a header and payload to be sent **/ -/** It also allows the header checksum to be precalcuated **/ -/** or calculated here **/ -/** part1 is always 4 bytes **/ -/** **/ -/*****************************************************************************/ - -static void ubcsp_setup_packet (uint8 *part1, uint8 calc, uint8 *part2, uint16 len2) -{ - /* If we need to calculate the checksum, do that now */ - - if (calc) - { - part1[3] = - ~(part1[0] + part1[1] + part1[2]); - } - - /* Setup the header send pointer and size so we can clock this out */ - - ubcsp_config.send_ptr = part1; - ubcsp_config.send_size = 4; - - /* Setup the payload send pointer and size */ - - ubcsp_config.next_send_ptr = part2; - ubcsp_config.next_send_size = len2; - -#if UBCSP_CRC - /* Initialize the crc as required */ - - ubcsp_config.send_crc = -1; - - ubcsp_config.need_send_crc = 1; -#endif -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_sent_packet **/ -/** **/ -/** Called when we have finished sending a packet **/ -/** If this packet was unreliable, then notify caller, and clear the data **/ -/** **/ -/*****************************************************************************/ - -static uint8 ubcsp_sent_packet (void) -{ - if (ubcsp_config.send_packet) - { - if (!ubcsp_config.send_packet->reliable) - { - /* We had a packet sent that was unreliable */ - - /* Forget about this packet */ - - ubcsp_config.send_packet = 0; - - /* Notify caller that they can send another one */ - - return UBCSP_PACKET_SENT; - } - } - - /* We didn't have a packet, or it was reliable - Must wait for ACK before allowing another packet to be sent */ - - return 0; -} - -/*****************************************************************************/ -/** **/ -/** ubcsp_poll **/ -/** **/ -/** This is the main function for ubcsp **/ -/** It performs a number of tasks **/ -/** **/ -/** 1) Send another octet to the UART - escaping as required **/ -/** 2) Setup the payload to be sent after the header has been sent **/ -/** 3) Send the CRC for the packet if required **/ -/** **/ -/** 4) Calculate the next Link Establishment State **/ -/** 5) Send a Link Establishment packet **/ -/** 6) Send a normal packet if available **/ -/** 7) Send an ACK packet if required **/ -/** **/ -/** 8) Receive octets from UART and deslip them as required **/ -/** 9) Place received octets into receive header or receive payload buffer **/ -/** 10) Process received packet when SLIP_END is received **/ -/** **/ -/** 11) Keep track of ability of caller to delay recalling **/ -/** **/ -/*****************************************************************************/ - -uint8 ubcsp_poll (uint8 *activity) -{ - uint8 - delay = UBCSP_POLL_TIME_IMMEDIATE; - - uint8 - value; - - /* Assume no activity to start with */ - - *activity = 0; - - /* If we don't have to delay, then send something if we can */ - - if (!ubcsp_config.delay) - { - /* Do we have something we are sending to send */ - - if (ubcsp_config.send_size) - { - /* We have something to send so send it */ - - if (ubcsp_config.send_slip_escape) - { - /* Last time we send a SLIP_ESCAPE octet - this time send the second escape code */ - - put_uart (ubcsp_config.send_slip_escape); - - ubcsp_config.send_slip_escape = 0; - } - else - { -#if UBCSP_CRC - /* get the value to send, and calculate CRC as we go */ - - value = *ubcsp_config.send_ptr ++; - - ubcsp_config.send_crc = ubcsp_calc_crc (value, ubcsp_config.send_crc); - - /* Output the octet */ - - ubcsp_put_slip_uart (value); -#else - /* Just output the octet*/ - - ubcsp_put_slip_uart (*ubcsp_config.send_ptr ++); -#endif - } - - /* If we did output a SLIP_ESCAPE, then don't process the end of a block */ - - if ((!ubcsp_config.send_slip_escape) && ((ubcsp_config.send_size = ubcsp_config.send_size - 1) == 0)) - { - /*** We are at the end of a block - either header or payload ***/ - - /* setup the next block */ - - ubcsp_config.send_ptr = ubcsp_config.next_send_ptr; - ubcsp_config.send_size = ubcsp_config.next_send_size; - ubcsp_config.next_send_ptr = 0; - ubcsp_config.next_send_size = 0; - -#if UBCSP_CRC - /* If we have no successor block - then we might need to send the CRC */ - - if (!ubcsp_config.send_ptr) - { - if (ubcsp_config.need_send_crc) - { - /* reverse the CRC from what we computed along the way */ - - ubcsp_config.need_send_crc = 0; - - ubcsp_config.send_crc = ubcsp_crc_reverse (ubcsp_config.send_crc); - - /* Save in the send_crc buffer */ - - ubcsp_send_crc[0] = (uint8) (ubcsp_config.send_crc >> 8); - ubcsp_send_crc[1] = (uint8) ubcsp_config.send_crc; - - /* Setup to send this buffer */ - - ubcsp_config.send_ptr = ubcsp_send_crc; - ubcsp_config.send_size = 2; - } - else - { - /* We don't need to send the crc - either we just have, or this packet doesn't include it */ - - /* Output the end of FRAME marker */ - - put_uart (SLIP_FRAME); - - /* Check if this is an unreliable packet */ - - *activity |= ubcsp_sent_packet (); - - /* We've sent the packet, so don't need to have be called quickly soon */ - - delay = UBCSP_POLL_TIME_DELAY; - } - } -#else - /* If we have no successor block - then we might need to send the CRC */ - - if (!ubcsp_config.send_ptr) - { - /* Output the end of FRAME marker */ - - put_uart (SLIP_FRAME); - - /* Check if this is an unreliable packet */ - - *activity |= ubcsp_sent_packet (); - - /* We've sent the packet, so don't need to have be called quickly soon */ - - delay = UBCSP_POLL_TIME_DELAY; - } -#endif - } - } - else if (ubcsp_config.link_establishment_packet == ubcsp_le_none) - { - /* We didn't have something to send - AND we have no Link Establishment packet to send */ - - if (ubcsp_config.link_establishment_resp & 2) - { - /* Send the start of FRAME packet */ - - put_uart (SLIP_FRAME); - - /* We did require a RESP packet - so setup the send */ - - ubcsp_setup_packet ((uint8*) ubcsp_send_le_header, 0, (uint8*) ubcsp_le_buffer[ubcsp_le_conf_resp], 4); - - /* We have now "sent" this packet */ - - ubcsp_config.link_establishment_resp = 0; - } - else if (ubcsp_config.send_packet) - { - /* There is a packet ready to be sent */ - - /* Send the start of FRAME packet */ - - put_uart (SLIP_FRAME); - - /* Encode up the packet header using ACK and SEQ numbers */ - - ubcsp_send_header[0] = - (ubcsp_config.send_packet->reliable << 7) | -#if UBCSP_CRC - 0x40 | /* Always use CRC's */ -#endif - (ubcsp_config.ack_number << 3) | - (ubcsp_config.sequence_number); - - /* Encode up the packet header's channel and length */ - ubcsp_send_header[1] = - (ubcsp_config.send_packet->channel & 0x0f) | - ((ubcsp_config.send_packet->length << 4) & 0xf0); - - ubcsp_send_header[2] = - (ubcsp_config.send_packet->length >> 4) & 0xff; - - /* Let the ubcsp_setup_packet function calculate the header checksum */ - - ubcsp_setup_packet ((uint8*) ubcsp_send_header, 1, ubcsp_config.send_packet->payload, ubcsp_config.send_packet->length); - - /* Don't need to send an ACK - we just place on in this packet */ - - ubcsp_config.send_ack = 0; - -#if SHOW_PACKET_ERRORS - printf (" : %10d Send %d Ack %d\n", - GetTickCount () % 100000, - ubcsp_config.sequence_number, - ubcsp_config.ack_number); -#endif - } - else if (ubcsp_config.send_ack) - { - /* Send the start of FRAME packet */ - - put_uart (SLIP_FRAME); - -#if SHOW_PACKET_ERRORS - printf (" : %10d Send ACK %d\n", - GetTickCount () % 100000, - ubcsp_config.ack_number); -#endif - - /* The ack packet is already computed apart from the first octet */ - - ubcsp_send_ack_header[0] = -#if UBCSP_CRC - 0x40 | -#endif - (ubcsp_config.ack_number << 3); - - /* Let the ubcsp_setup_packet function calculate the header checksum */ - - ubcsp_setup_packet (ubcsp_send_ack_header, 1, 0, 0); - - /* We've now sent the ack */ - - ubcsp_config.send_ack = 0; - } - else - { - /* We didn't have a Link Establishment response packet, - a normal packet or an ACK packet to send */ - - delay = UBCSP_POLL_TIME_DELAY; - } - } - else - { -#if SHOW_PACKET_ERRORS -// printf (" : %10d Send LE %d\n", -// GetTickCount () % 100000, -// ubcsp_config.link_establishment_packet); -#endif - - /* Send A Link Establishment Message */ - - put_uart (SLIP_FRAME); - - /* Send the Link Establishment header followed by the - Link Establishment packet */ - - ubcsp_setup_packet ((uint8*) ubcsp_send_le_header, 0, (uint8*) ubcsp_le_buffer[ubcsp_config.link_establishment_packet], 4); - - /* start sending immediately */ - - ubcsp_config.delay = 0; - - /* workout what the next link establishment packet should be */ - - ubcsp_config.link_establishment_packet = next_le_packet[ubcsp_config.link_establishment_state + ubcsp_config.link_establishment_resp * 4]; - - /* We have now delt with any response packet that we needed */ - - ubcsp_config.link_establishment_resp = 0; - - return 0; - } - } - - /* We now need to receive any octets from the UART */ - - while ((ubcsp_config.receive_packet) && (get_uart (&value))) - { - /* If the last octet was SLIP_ESCAPE, then special processing is required */ - - if (ubcsp_config.receive_slip_escape) - { - /* WARNING - out of range values are not detected !!! - This will probably be caught with the checksum or CRC check */ - - value = ubcsp_deslip[value - SLIP_ESCAPE_FRAME]; - - ubcsp_config.receive_slip_escape = 0; - } - else - { - /* Check for the SLIP_FRAME octet - must be start or end of packet */ - if (value == SLIP_FRAME) - { - /* If we had a full header then we have a packet */ - - if (ubcsp_config.receive_index >= 0) - { - /* process the received packet */ - - *activity |= ubcsp_recevied_packet (); - - if (*activity & UBCSP_PACKET_ACK) - { - /* We need to ACK this packet, then don't delay its sending */ - ubcsp_config.delay = 0; - } - } - - /* Setup to receive the next packet */ - - ubcsp_config.receive_index = -4; - - /* Ok, next octet */ - - goto finished_receive; - } - else if (value == SLIP_ESCAPE) - { - /* If we receive a SLIP_ESCAPE, - then remember to process the next special octet */ - - ubcsp_config.receive_slip_escape = 1; - - goto finished_receive; - } - } - - if (ubcsp_config.receive_index < 0) - { - /* We are still receiving the header */ - - ubcsp_receive_header[ubcsp_config.receive_index + 4] = value; - - ubcsp_config.receive_index ++; - } - else if (ubcsp_config.receive_index < ubcsp_config.receive_packet->length) - { - /* We are receiving the payload */ - /* We might stop comming here if we are receiving a - packet which is longer than the receive_packet->length - given by the host */ - - ubcsp_config.receive_packet->payload[ubcsp_config.receive_index] = value; - - ubcsp_config.receive_index ++; - } - -finished_receive: - { - } - } - - if (ubcsp_config.delay > 0) - { - /* We were delayed so delay some more - this could be cancelled if we received something */ - - ubcsp_config.delay --; - } - else - { - /* We had no delay, so use the delay we just decided to us */ - - ubcsp_config.delay = delay; - } - - /* Report the current delay to the user */ - - return ubcsp_config.delay; -} +/* + * + * BlueZ - Bluetooth protocol stack for Linux + * + * Copyright (C) 2000-2005 CSR Ltd. + * + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifdef HAVE_CONFIG_H +#include +#endif + +/*****************************************************************************/ +/*****************************************************************************/ +/*****************************************************************************/ +/** **/ +/** ubcsp,c **/ +/** **/ +/** MicroBCSP - a very low cost implementation of the BCSP protocol **/ +/** **/ +/*****************************************************************************/ + +#include "ubcsp.h" + +#if SHOW_PACKET_ERRORS || SHOW_LE_STATES +#include +#include +#endif + +static uint16 ubcsp_calc_crc (uint8 ch, uint16 crc); +static uint16 ubcsp_crc_reverse (uint16); + +/*****************************************************************************/ +/** **/ +/** Constant Data - ROM **/ +/** **/ +/*****************************************************************************/ + +/* This is the storage for the link establishment messages */ + +static const uint8 ubcsp_le_buffer[4][4] = + { + { 0xDA, 0xDC, 0xED, 0xED }, + { 0xAC, 0xAF, 0xEF, 0xEE }, + { 0xAD, 0xEF, 0xAC, 0xED }, + { 0xDE, 0xAD, 0xD0, 0xD0 }, + }; + +/* These are the link establishment headers */ +/* The two version are for the CRC and non-CRC varients */ + +#if UBCSP_CRC +static const uint8 ubcsp_send_le_header[4] = + { + 0x40, 0x41, 0x00, 0x7E + }; +#else +static const uint8 ubcsp_send_le_header[4] = + { + 0x00, 0x41, 0x00, 0xBE + }; +#endif + +/*****************************************************************************/ +/** **/ +/** Static Data - RAM **/ +/** **/ +/*****************************************************************************/ + +/* This is the storage for all state data for ubcsp */ + +static struct ubcsp_configuration ubcsp_config; + +/* This is the ACK packet header - this will be overwritten when + we create an ack packet */ + +static uint8 ubcsp_send_ack_header[4] = + { + 0x00, 0x00, 0x00, 0x00 + }; + +/* This is the deslip lookup table */ + +static const uint8 ubcsp_deslip[2] = + { + SLIP_FRAME, SLIP_ESCAPE, + }; + +/* This is a state machine table for link establishment */ + +static uint8 next_le_packet[16] = + { + ubcsp_le_sync, // uninit + ubcsp_le_conf, // init + ubcsp_le_none, // active + ubcsp_le_none, + ubcsp_le_sync_resp, // sync_resp + ubcsp_le_sync_resp, + ubcsp_le_none, + ubcsp_le_none, + ubcsp_le_none, // conf_resp + ubcsp_le_conf_resp, + ubcsp_le_conf_resp, + ubcsp_le_none, + }; + +/* This is the storage required for building send and crc data */ + +static uint8 ubcsp_send_header[4]; +static uint8 ubcsp_send_crc[2]; + +/* This is where the receive header is stored before the payload arrives */ + +static uint8 ubcsp_receive_header[4]; + +/*****************************************************************************/ +/** **/ +/** Code - ROM or RAM **/ +/** **/ +/*****************************************************************************/ + +/*****************************************************************************/ +/** **/ +/** ubcsp_initialize **/ +/** **/ +/** This initializes the state of the ubcsp engine to a known values **/ +/** **/ +/*****************************************************************************/ + +void ubcsp_initialize (void) +{ + ubcsp_config.ack_number = 0; + ubcsp_config.sequence_number = 0; + ubcsp_config.send_ptr = 0; + ubcsp_config.send_size = 0; + ubcsp_config.receive_index = -4; + + ubcsp_config.delay = 0; + +#if SHOW_LE_STATES + printf ("Hello Link Uninitialized\n"); +#endif + + ubcsp_config.link_establishment_state = ubcsp_le_uninitialized; + ubcsp_config.link_establishment_packet = ubcsp_le_sync; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_send_packet **/ +/** **/ +/** This sends a packet structure for sending to the ubcsp engine **/ +/** This can only be called when the activity indication from ubcsp_poll **/ +/** indicates that a packet can be sent with UBCSP_PACKET_SENT **/ +/** **/ +/*****************************************************************************/ + +void ubcsp_send_packet (struct ubcsp_packet *send_packet) +{ + /* Initialize the send data to the packet we want to send */ + + ubcsp_config.send_packet = send_packet; + + /* we cannot send the packet at the moment + when we can at the moment, just set things to 0 */ + + ubcsp_config.send_size = 0; + ubcsp_config.send_ptr = 0; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_receive_packet **/ +/** **/ +/** This sends a packet structure for receiving to the ubcsp engine **/ +/** This can only be called when the activity indication from ubcsp_poll **/ +/** indicates that a packet can be sent with UBCSP_PACKET_RECEIVED **/ +/** **/ +/*****************************************************************************/ + +void ubcsp_receive_packet (struct ubcsp_packet *receive_packet) +{ + /* Initialize the receive data to the packet we want to receive */ + + ubcsp_config.receive_packet = receive_packet; + + /* setup to receive the header first */ + + ubcsp_config.receive_index = -4; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_calc_crc **/ +/** **/ +/** Takes the next 8 bit value ch, and updates the crc with this value **/ +/** **/ +/*****************************************************************************/ + + +#ifdef UBCSP_CRC + +static uint16 ubcsp_calc_crc (uint8 ch, uint16 crc) +{ + /* Calculate the CRC using the above 16 entry lookup table */ + + static const uint16 crc_table[] = + { + 0x0000, 0x1081, 0x2102, 0x3183, + 0x4204, 0x5285, 0x6306, 0x7387, + 0x8408, 0x9489, 0xa50a, 0xb58b, + 0xc60c, 0xd68d, 0xe70e, 0xf78f + }; + + /* Do this four bits at a time - more code, less space */ + + crc = (crc >> 4) ^ crc_table[(crc ^ ch) & 0x000f]; + crc = (crc >> 4) ^ crc_table[(crc ^ (ch >> 4)) & 0x000f]; + + return crc; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_crc_reverse **/ +/** **/ +/** Reserves the bits in crc and returns the new value **/ +/** **/ +/*****************************************************************************/ + +static uint16 ubcsp_crc_reverse (uint16 crc) +{ + int32 + b, + rev; + + /* Reserse the bits to compute the actual CRC value */ + + for (b = 0, rev=0; b < 16; b++) + { + rev = rev << 1; + rev |= (crc & 1); + crc = crc >> 1; + } + + return rev; +} + +#endif + +/*****************************************************************************/ +/** **/ +/** ubcsp_put_slip_uart **/ +/** **/ +/** Outputs a single octet to the uart **/ +/** If the octet needs to be escaped, then output the escape value **/ +/** and then store the second octet to be output later **/ +/** **/ +/*****************************************************************************/ + +static void ubcsp_put_slip_uart (uint8 ch) +{ + /* output a single UART octet */ + + /* If it needs to be escaped, then output the escape octet + and set the send_slip_escape so that the next time we + output the second octet for the escape correctly. + This is done right at the top of ubcsp_poll */ + + if (ch == SLIP_FRAME) + { + put_uart (SLIP_ESCAPE); + ubcsp_config.send_slip_escape = SLIP_ESCAPE_FRAME; + } + else if (ch == SLIP_ESCAPE) + { + put_uart (SLIP_ESCAPE); + ubcsp_config.send_slip_escape = SLIP_ESCAPE_ESCAPE; + } + else + { + /* Not escaped, so just output octet */ + + put_uart (ch); + } +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_which_le_payload **/ +/** **/ +/** Check the payload of this packet, and determine which of the four **/ +/** link establishment packets this was. **/ +/** Can return 5 if it is not a valid link establishment packet **/ +/** **/ +/*****************************************************************************/ + +static uint32 ubcsp_which_le_payload (const uint8 *payload) +{ + static int32 + octet, + loop; + + /* Search through the various link establishment payloads to find + which one we have received */ + + for (loop = 0; loop < 4; loop ++) + { + for (octet = 0; octet < 4; octet ++) + { + if (payload[octet] != ubcsp_le_buffer[loop][octet]) + { + /* Bad match, just to loop again */ + goto bad_match_loop; + } + } + + /* All the octets matched, return the value */ + + return loop; + + /* Jumps out of octet loop if we got a bad match */ +bad_match_loop: + {} + } + + /* Non of the link establishment payloads matched - return invalid value */ + + return 5; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_recevied_packet **/ +/** **/ +/** This function is called when we have a SLIP END octet and a full **/ +/** packet header and possibly data in the receive packet **/ +/** **/ +/*****************************************************************************/ + +static uint8 ubcsp_recevied_packet (void) +{ + static uint8 + receive_crc, + receive_seq, + receive_ack, + activity; + +#if UBCSP_CRC + static int32 + loop; + + static uint16 + crc; +#endif + + static uint16 + length; + + /* Keep track of what activity this received packet will cause */ + + activity = 0; + + /*** Do all error checks that we can ***/ + + /* First check the header checksum */ + + if (((ubcsp_receive_header[0] + ubcsp_receive_header[1] + ubcsp_receive_header[2] + ubcsp_receive_header[3]) & 0xff) != 0xff) + { + /* Header Checksum Error */ + +#if SHOW_PACKET_ERRORS + printf ("\n######################## Header Checksum Error %02X %02X %02X %02X\n", + ubcsp_receive_header[0], + ubcsp_receive_header[1], + ubcsp_receive_header[2], + ubcsp_receive_header[3]); +#endif + + /* If we have a header checksum error, send an ack in return + this gets a packet to be resent as quickly as possible */ + + ubcsp_config.send_ack = 1; + + return activity; + } + + /* Decode the received packets header */ + + ubcsp_config.receive_packet->reliable = (ubcsp_receive_header[0] & 0x80) >> 7; + + receive_crc = (ubcsp_receive_header[0] & 0x40) >> 6; + receive_ack = (ubcsp_receive_header[0] & 0x38) >> 3; + receive_seq = (ubcsp_receive_header[0] & 0x07); + + ubcsp_config.receive_packet->channel = (ubcsp_receive_header[1] & 0x0f); + + length = + ((ubcsp_receive_header[1] & 0xf0) >> 4) | + (ubcsp_receive_header[2] << 4); + +#if SHOW_PACKET_ERRORS + if (ubcsp_config.receive_packet->reliable) + { + printf (" : %10d Recv SEQ: %d ACK %d\n", + GetTickCount () % 100000, + receive_seq, + receive_ack); + } + else if (ubcsp_config.receive_packet->channel != 1) + { + printf (" : %10d Recv ACK %d\n", + GetTickCount () % 100000, + receive_ack); + } +#endif + + /* Check for length errors */ + +#if UBCSP_CRC + if (receive_crc) + { + /* If this packet had a CRC, then the length of the payload + should be 2 less than the received size of the payload */ + + if (length + 2 != ubcsp_config.receive_index) + { + /* Slip Length Error */ + +#if SHOW_PACKET_ERRORS + printf ("\n######################## Slip Length Error (With CRC) %d,%d\n", length, ubcsp_config.receive_index - 2); +#endif + + /* If we have a payload length error, send an ack in return + this gets a packet to be resent as quickly as possible */ + + ubcsp_config.send_ack = 1; + return activity; + } + + /* We have a CRC at the end of this packet */ + + ubcsp_config.receive_index -= 2; + + /* Calculate the packet CRC */ + + crc = 0xffff; + + /* CRC the packet header */ + + for (loop = 0; loop < 4; loop ++) + { + crc = ubcsp_calc_crc (ubcsp_receive_header[loop], crc); + } + + /* CRC the packet payload - without the CRC bytes */ + + for (loop = 0; loop < ubcsp_config.receive_index; loop ++) + { + crc = ubcsp_calc_crc (ubcsp_config.receive_packet->payload[loop], crc); + } + + /* Reverse the CRC */ + + crc = ubcsp_crc_reverse (crc); + + /* Check the CRC is correct */ + + if + ( + (((crc & 0xff00) >> 8) != ubcsp_config.receive_packet->payload[ubcsp_config.receive_index]) || + ((crc & 0xff) != ubcsp_config.receive_packet->payload[ubcsp_config.receive_index + 1]) + ) + { +#if SHOW_PACKET_ERRORS + printf ("\n######################## CRC Error\n"); +#endif + + /* If we have a packet crc error, send an ack in return + this gets a packet to be resent as quickly as possible */ + + ubcsp_config.send_ack = 1; + return activity; + } + } + else + { +#endif + /* No CRC present, so just check the length of payload with that received */ + + if (length != ubcsp_config.receive_index) + { + /* Slip Length Error */ + +#if SHOW_PACKET_ERRORS + printf ("\n######################## Slip Length Error (No CRC) %d,%d\n", length, ubcsp_config.receive_index); +#endif + + /* If we have a payload length error, send an ack in return + this gets a packet to be resent as quickly as possible */ + + ubcsp_config.send_ack = 1; + return activity; + } +#if UBCSP_CRC + } +#endif + + /*** We have a fully formed packet having passed all data integrity checks ***/ + + /* Check if we have an ACK for the last packet we sent */ + + if (receive_ack != ubcsp_config.sequence_number) + { + /* Since we only have a window size of 1, if the ACK is not equal to SEQ + then the packet was sent */ + + if + ( + (ubcsp_config.send_packet) && + (ubcsp_config.send_packet->reliable) + ) + { + /* We had sent a reliable packet, so clear this packet + Then increament the sequence number for the next packet */ + + ubcsp_config.send_packet = 0; + ubcsp_config.sequence_number ++; + ubcsp_config.delay = 0; + + /* Notify the caller that we have SENT a packet */ + + activity |= UBCSP_PACKET_SENT; + } + } + + /*** Now we can concentrate of the packet we have received ***/ + + /* Check for Link Establishment packets */ + + if (ubcsp_config.receive_packet->channel == 1) + { + /* Link Establishment */ + + ubcsp_config.delay = 0; + + /* Find which link establishment packet this payload means + This could return 5, meaning none */ + + switch (ubcsp_which_le_payload (ubcsp_config.receive_packet->payload)) + { + case 0: + { + /* SYNC Recv'd */ + +#if SHOW_LE_STATES + printf ("Recv SYNC\n"); +#endif + + /* If we receive a SYNC, then we respond to it with a SYNC RESP + but only if we are not active. + If we are active, then we have a PEER RESET */ + + if (ubcsp_config.link_establishment_state < ubcsp_le_active) + { + ubcsp_config.link_establishment_resp = 1; + } + else + { + /* Peer reset !!!! */ + +#if SHOW_LE_STATES + printf ("\n\n\n\n\nPEER RESET\n\n"); +#endif + + /* Reinitialize the link */ + + ubcsp_initialize (); + + /* Tell the host what has happened */ + + return UBCSP_PEER_RESET; + } + break; + } + + case 1: + { + /* SYNC RESP Recv'd */ + +#if SHOW_LE_STATES + printf ("Recv SYNC RESP\n"); +#endif + + /* If we receive a SYNC RESP, push us into the initialized state */ + + if (ubcsp_config.link_establishment_state < ubcsp_le_initialized) + { +#if SHOW_LE_STATES + printf ("Link Initialized\n"); +#endif + ubcsp_config.link_establishment_state = ubcsp_le_initialized; + } + + break; + } + + case 2: + { + /* CONF Recv'd */ + +#if SHOW_LE_STATES + printf ("Recv CONF\n"); +#endif + + /* If we receive a CONF, and we are initialized or active + then respond with a CONF RESP */ + + if (ubcsp_config.link_establishment_state >= ubcsp_le_initialized) + { + ubcsp_config.link_establishment_resp = 2; + } + + break; + } + + case 3: + { + /* CONF RESP Recv'd */ + +#if SHOW_LE_STATES + printf ("Recv CONF RESP\n"); +#endif + + /* If we received a CONF RESP, then push us into the active state */ + + if (ubcsp_config.link_establishment_state < ubcsp_le_active) + { +#if SHOW_LE_STATES + printf ("Link Active\n"); +#endif + + ubcsp_config.link_establishment_state = ubcsp_le_active; + ubcsp_config.send_size = 0; + + return activity | UBCSP_PACKET_SENT; + } + + break; + } + } + + /* We have finished processing Link Establishment packets */ + } + else if (ubcsp_config.receive_index) + { + /* We have some payload data we need to process + but only if we are active - otherwise, we just ignore it */ + + if (ubcsp_config.link_establishment_state == ubcsp_le_active) + { + if (ubcsp_config.receive_packet->reliable) + { + /* If the packet we've just received was reliable + then send an ACK */ + + ubcsp_config.send_ack = 1; + + /* We the sequence number we received is the same as + the last ACK we sent, then we have received a packet in sequence */ + + if (receive_seq == ubcsp_config.ack_number) + { + /* Increase the ACK number - which will be sent in the next ACK + or normal packet we send */ + + ubcsp_config.ack_number ++; + + /* Set the values in the receive_packet structure, so the caller + knows how much data we have */ + + ubcsp_config.receive_packet->length = length; + ubcsp_config.receive_packet = 0; + + /* Tell the caller that we have received a packet, and that it + will be ACK'ed */ + + activity |= UBCSP_PACKET_RECEIVED | UBCSP_PACKET_ACK; + } + } + else + { + /* Set the values in the receive_packet structure, so the caller + knows how much data we have */ + + ubcsp_config.receive_packet->length = length; + ubcsp_config.receive_packet = 0; + + /* Tell the caller that we have received a packet */ + + activity |= UBCSP_PACKET_RECEIVED; + } + } + } + + /* Just return any activity that occured */ + + return activity; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_setup_packet **/ +/** **/ +/** This function is called to setup a packet to be sent **/ +/** This allows just a header, or a header and payload to be sent **/ +/** It also allows the header checksum to be precalcuated **/ +/** or calculated here **/ +/** part1 is always 4 bytes **/ +/** **/ +/*****************************************************************************/ + +static void ubcsp_setup_packet (uint8 *part1, uint8 calc, uint8 *part2, uint16 len2) +{ + /* If we need to calculate the checksum, do that now */ + + if (calc) + { + part1[3] = + ~(part1[0] + part1[1] + part1[2]); + } + + /* Setup the header send pointer and size so we can clock this out */ + + ubcsp_config.send_ptr = part1; + ubcsp_config.send_size = 4; + + /* Setup the payload send pointer and size */ + + ubcsp_config.next_send_ptr = part2; + ubcsp_config.next_send_size = len2; + +#if UBCSP_CRC + /* Initialize the crc as required */ + + ubcsp_config.send_crc = -1; + + ubcsp_config.need_send_crc = 1; +#endif +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_sent_packet **/ +/** **/ +/** Called when we have finished sending a packet **/ +/** If this packet was unreliable, then notify caller, and clear the data **/ +/** **/ +/*****************************************************************************/ + +static uint8 ubcsp_sent_packet (void) +{ + if (ubcsp_config.send_packet) + { + if (!ubcsp_config.send_packet->reliable) + { + /* We had a packet sent that was unreliable */ + + /* Forget about this packet */ + + ubcsp_config.send_packet = 0; + + /* Notify caller that they can send another one */ + + return UBCSP_PACKET_SENT; + } + } + + /* We didn't have a packet, or it was reliable + Must wait for ACK before allowing another packet to be sent */ + + return 0; +} + +/*****************************************************************************/ +/** **/ +/** ubcsp_poll **/ +/** **/ +/** This is the main function for ubcsp **/ +/** It performs a number of tasks **/ +/** **/ +/** 1) Send another octet to the UART - escaping as required **/ +/** 2) Setup the payload to be sent after the header has been sent **/ +/** 3) Send the CRC for the packet if required **/ +/** **/ +/** 4) Calculate the next Link Establishment State **/ +/** 5) Send a Link Establishment packet **/ +/** 6) Send a normal packet if available **/ +/** 7) Send an ACK packet if required **/ +/** **/ +/** 8) Receive octets from UART and deslip them as required **/ +/** 9) Place received octets into receive header or receive payload buffer **/ +/** 10) Process received packet when SLIP_END is received **/ +/** **/ +/** 11) Keep track of ability of caller to delay recalling **/ +/** **/ +/*****************************************************************************/ + +uint8 ubcsp_poll (uint8 *activity) +{ + uint8 + delay = UBCSP_POLL_TIME_IMMEDIATE; + + uint8 + value; + + /* Assume no activity to start with */ + + *activity = 0; + + /* If we don't have to delay, then send something if we can */ + + if (!ubcsp_config.delay) + { + /* Do we have something we are sending to send */ + + if (ubcsp_config.send_size) + { + /* We have something to send so send it */ + + if (ubcsp_config.send_slip_escape) + { + /* Last time we send a SLIP_ESCAPE octet + this time send the second escape code */ + + put_uart (ubcsp_config.send_slip_escape); + + ubcsp_config.send_slip_escape = 0; + } + else + { +#if UBCSP_CRC + /* get the value to send, and calculate CRC as we go */ + + value = *ubcsp_config.send_ptr ++; + + ubcsp_config.send_crc = ubcsp_calc_crc (value, ubcsp_config.send_crc); + + /* Output the octet */ + + ubcsp_put_slip_uart (value); +#else + /* Just output the octet*/ + + ubcsp_put_slip_uart (*ubcsp_config.send_ptr ++); +#endif + } + + /* If we did output a SLIP_ESCAPE, then don't process the end of a block */ + + if ((!ubcsp_config.send_slip_escape) && ((ubcsp_config.send_size = ubcsp_config.send_size - 1) == 0)) + { + /*** We are at the end of a block - either header or payload ***/ + + /* setup the next block */ + + ubcsp_config.send_ptr = ubcsp_config.next_send_ptr; + ubcsp_config.send_size = ubcsp_config.next_send_size; + ubcsp_config.next_send_ptr = 0; + ubcsp_config.next_send_size = 0; + +#if UBCSP_CRC + /* If we have no successor block + then we might need to send the CRC */ + + if (!ubcsp_config.send_ptr) + { + if (ubcsp_config.need_send_crc) + { + /* reverse the CRC from what we computed along the way */ + + ubcsp_config.need_send_crc = 0; + + ubcsp_config.send_crc = ubcsp_crc_reverse (ubcsp_config.send_crc); + + /* Save in the send_crc buffer */ + + ubcsp_send_crc[0] = (uint8) (ubcsp_config.send_crc >> 8); + ubcsp_send_crc[1] = (uint8) ubcsp_config.send_crc; + + /* Setup to send this buffer */ + + ubcsp_config.send_ptr = ubcsp_send_crc; + ubcsp_config.send_size = 2; + } + else + { + /* We don't need to send the crc + either we just have, or this packet doesn't include it */ + + /* Output the end of FRAME marker */ + + put_uart (SLIP_FRAME); + + /* Check if this is an unreliable packet */ + + *activity |= ubcsp_sent_packet (); + + /* We've sent the packet, so don't need to have be called quickly soon */ + + delay = UBCSP_POLL_TIME_DELAY; + } + } +#else + /* If we have no successor block + then we might need to send the CRC */ + + if (!ubcsp_config.send_ptr) + { + /* Output the end of FRAME marker */ + + put_uart (SLIP_FRAME); + + /* Check if this is an unreliable packet */ + + *activity |= ubcsp_sent_packet (); + + /* We've sent the packet, so don't need to have be called quickly soon */ + + delay = UBCSP_POLL_TIME_DELAY; + } +#endif + } + } + else if (ubcsp_config.link_establishment_packet == ubcsp_le_none) + { + /* We didn't have something to send + AND we have no Link Establishment packet to send */ + + if (ubcsp_config.link_establishment_resp & 2) + { + /* Send the start of FRAME packet */ + + put_uart (SLIP_FRAME); + + /* We did require a RESP packet - so setup the send */ + + ubcsp_setup_packet ((uint8*) ubcsp_send_le_header, 0, (uint8*) ubcsp_le_buffer[ubcsp_le_conf_resp], 4); + + /* We have now "sent" this packet */ + + ubcsp_config.link_establishment_resp = 0; + } + else if (ubcsp_config.send_packet) + { + /* There is a packet ready to be sent */ + + /* Send the start of FRAME packet */ + + put_uart (SLIP_FRAME); + + /* Encode up the packet header using ACK and SEQ numbers */ + + ubcsp_send_header[0] = + (ubcsp_config.send_packet->reliable << 7) | +#if UBCSP_CRC + 0x40 | /* Always use CRC's */ +#endif + (ubcsp_config.ack_number << 3) | + (ubcsp_config.sequence_number); + + /* Encode up the packet header's channel and length */ + ubcsp_send_header[1] = + (ubcsp_config.send_packet->channel & 0x0f) | + ((ubcsp_config.send_packet->length << 4) & 0xf0); + + ubcsp_send_header[2] = + (ubcsp_config.send_packet->length >> 4) & 0xff; + + /* Let the ubcsp_setup_packet function calculate the header checksum */ + + ubcsp_setup_packet ((uint8*) ubcsp_send_header, 1, ubcsp_config.send_packet->payload, ubcsp_config.send_packet->length); + + /* Don't need to send an ACK - we just place on in this packet */ + + ubcsp_config.send_ack = 0; + +#if SHOW_PACKET_ERRORS + printf (" : %10d Send %d Ack %d\n", + GetTickCount () % 100000, + ubcsp_config.sequence_number, + ubcsp_config.ack_number); +#endif + } + else if (ubcsp_config.send_ack) + { + /* Send the start of FRAME packet */ + + put_uart (SLIP_FRAME); + +#if SHOW_PACKET_ERRORS + printf (" : %10d Send ACK %d\n", + GetTickCount () % 100000, + ubcsp_config.ack_number); +#endif + + /* The ack packet is already computed apart from the first octet */ + + ubcsp_send_ack_header[0] = +#if UBCSP_CRC + 0x40 | +#endif + (ubcsp_config.ack_number << 3); + + /* Let the ubcsp_setup_packet function calculate the header checksum */ + + ubcsp_setup_packet (ubcsp_send_ack_header, 1, 0, 0); + + /* We've now sent the ack */ + + ubcsp_config.send_ack = 0; + } + else + { + /* We didn't have a Link Establishment response packet, + a normal packet or an ACK packet to send */ + + delay = UBCSP_POLL_TIME_DELAY; + } + } + else + { +#if SHOW_PACKET_ERRORS +// printf (" : %10d Send LE %d\n", +// GetTickCount () % 100000, +// ubcsp_config.link_establishment_packet); +#endif + + /* Send A Link Establishment Message */ + + put_uart (SLIP_FRAME); + + /* Send the Link Establishment header followed by the + Link Establishment packet */ + + ubcsp_setup_packet ((uint8*) ubcsp_send_le_header, 0, (uint8*) ubcsp_le_buffer[ubcsp_config.link_establishment_packet], 4); + + /* start sending immediately */ + + ubcsp_config.delay = 0; + + /* workout what the next link establishment packet should be */ + + ubcsp_config.link_establishment_packet = next_le_packet[ubcsp_config.link_establishment_state + ubcsp_config.link_establishment_resp * 4]; + + /* We have now delt with any response packet that we needed */ + + ubcsp_config.link_establishment_resp = 0; + + return 0; + } + } + + /* We now need to receive any octets from the UART */ + + while ((ubcsp_config.receive_packet) && (get_uart (&value))) + { + /* If the last octet was SLIP_ESCAPE, then special processing is required */ + + if (ubcsp_config.receive_slip_escape) + { + /* WARNING - out of range values are not detected !!! + This will probably be caught with the checksum or CRC check */ + + value = ubcsp_deslip[value - SLIP_ESCAPE_FRAME]; + + ubcsp_config.receive_slip_escape = 0; + } + else + { + /* Check for the SLIP_FRAME octet - must be start or end of packet */ + if (value == SLIP_FRAME) + { + /* If we had a full header then we have a packet */ + + if (ubcsp_config.receive_index >= 0) + { + /* process the received packet */ + + *activity |= ubcsp_recevied_packet (); + + if (*activity & UBCSP_PACKET_ACK) + { + /* We need to ACK this packet, then don't delay its sending */ + ubcsp_config.delay = 0; + } + } + + /* Setup to receive the next packet */ + + ubcsp_config.receive_index = -4; + + /* Ok, next octet */ + + goto finished_receive; + } + else if (value == SLIP_ESCAPE) + { + /* If we receive a SLIP_ESCAPE, + then remember to process the next special octet */ + + ubcsp_config.receive_slip_escape = 1; + + goto finished_receive; + } + } + + if (ubcsp_config.receive_index < 0) + { + /* We are still receiving the header */ + + ubcsp_receive_header[ubcsp_config.receive_index + 4] = value; + + ubcsp_config.receive_index ++; + } + else if (ubcsp_config.receive_index < ubcsp_config.receive_packet->length) + { + /* We are receiving the payload */ + /* We might stop comming here if we are receiving a + packet which is longer than the receive_packet->length + given by the host */ + + ubcsp_config.receive_packet->payload[ubcsp_config.receive_index] = value; + + ubcsp_config.receive_index ++; + } + +finished_receive: + { + } + } + + if (ubcsp_config.delay > 0) + { + /* We were delayed so delay some more + this could be cancelled if we received something */ + + ubcsp_config.delay --; + } + else + { + /* We had no delay, so use the delay we just decided to us */ + + ubcsp_config.delay = delay; + } + + /* Report the current delay to the user */ + + return ubcsp_config.delay; +} diff --git a/tools/ubcsp.h b/tools/ubcsp.h index 6a74e9a..59ce007 100644 --- a/tools/ubcsp.h +++ b/tools/ubcsp.h @@ -1,208 +1,208 @@ -/* - * - * BlueZ - Bluetooth protocol stack for Linux - * - * Copyright (C) 2000-2005 CSR Ltd. - * - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -#ifndef UBCSP_INCLUDE_H -#define UBCSP_INCLUDE_H - -/*****************************************************************************/ -/*****************************************************************************/ -/*****************************************************************************/ -/** **/ -/** ubcsp.h **/ -/** **/ -/** MicroBCSP - a very low cost implementation of the BCSP protocol **/ -/** **/ -/*****************************************************************************/ - -/* If we wish to use CRC's, then change 0 to 1 in the next line */ -#define UBCSP_CRC 1 - -/* Define some basic types - change these for your architecture */ -typedef unsigned char uint8; -typedef unsigned short uint16; -typedef unsigned int uint32; -typedef signed char int8; -typedef signed short int16; -typedef signed int int32; - -/* The defines below require a printf function to be available */ - -/* Do we want to show packet errors in debug output */ -#define SHOW_PACKET_ERRORS 0 - -/* Do we want to show Link Establishment State transitions in debug output */ -#define SHOW_LE_STATES 0 - -/*****************************************************************************/ -/** **/ -/** ubcsp_packet **/ -/** **/ -/** This is description of a bcsp packet for the upper layer **/ -/** **/ -/*****************************************************************************/ - -struct ubcsp_packet -{ - uint8 channel; /* Which Channel this packet is to/from */ - uint8 reliable; /* Is this packet reliable */ - uint8 use_crc; /* Does this packet use CRC data protection */ - uint16 length; /* What is the length of the payload data */ - uint8 *payload; /* The payload data itself - size of length */ -}; - -/*****************************************************************************/ -/** **/ -/** ubcsp_configuration **/ -/** **/ -/** This is the main configuration of the ubcsp engine **/ -/** All state variables are stored in this structure **/ -/** **/ -/*****************************************************************************/ - -enum ubcsp_link_establishment_state -{ - ubcsp_le_uninitialized, - ubcsp_le_initialized, - ubcsp_le_active -}; - -enum ubcsp_link_establishment_packet -{ - ubcsp_le_sync, - ubcsp_le_sync_resp, - ubcsp_le_conf, - ubcsp_le_conf_resp, - ubcsp_le_none -}; - -struct ubcsp_configuration -{ - uint8 link_establishment_state; - uint8 link_establishment_resp; - uint8 link_establishment_packet; - - uint8 sequence_number:3; - uint8 ack_number:3; - uint8 send_ack; - struct ubcsp_packet *send_packet; - struct ubcsp_packet *receive_packet; - - uint8 receive_header_checksum; - uint8 receive_slip_escape; - int32 receive_index; - - uint8 send_header_checksum; -#ifdef UBCSP_CRC - uint8 need_send_crc; - uint16 send_crc; -#endif - uint8 send_slip_escape; - - uint8 *send_ptr; - int32 send_size; - uint8 *next_send_ptr; - int32 next_send_size; - - int8 delay; -}; - -/*****************************************************************************/ -/** **/ -/** ubcsp_poll sets activity from an OR of these flags **/ -/** **/ -/*****************************************************************************/ - -#define UBCSP_PACKET_SENT 0x01 -#define UBCSP_PACKET_RECEIVED 0x02 -#define UBCSP_PEER_RESET 0x04 -#define UBCSP_PACKET_ACK 0x08 - -/*****************************************************************************/ -/** **/ -/** This is the functional interface for ucbsp **/ -/** **/ -/*****************************************************************************/ - -void ubcsp_initialize (void); -void ubcsp_send_packet (struct ubcsp_packet *send_packet); -void ubcsp_receive_packet (struct ubcsp_packet *receive_packet); -uint8 ubcsp_poll (uint8 *activity); - -/*****************************************************************************/ -/** **/ -/** Slip Escape Values **/ -/** **/ -/*****************************************************************************/ - -#define SLIP_FRAME 0xC0 -#define SLIP_ESCAPE 0xDB -#define SLIP_ESCAPE_FRAME 0xDC -#define SLIP_ESCAPE_ESCAPE 0xDD - -/*****************************************************************************/ -/*****************************************************************************/ -/*****************************************************************************/ - -/*****************************************************************************/ -/** **/ -/** These functions need to be linked into your system **/ -/** **/ -/*****************************************************************************/ - -/*****************************************************************************/ -/** **/ -/** put_uart outputs a single octet over the UART Tx line **/ -/** **/ -/*****************************************************************************/ - -extern void put_uart (uint8); - -/*****************************************************************************/ -/** **/ -/** get_uart receives a single octet over the UART Rx line **/ -/** if no octet is available, then this returns 0 **/ -/** if an octet was read, then this is returned in the argument and **/ -/** the function returns 1 **/ -/** **/ -/*****************************************************************************/ - -extern uint8 get_uart (uint8 *); - -/*****************************************************************************/ -/** **/ -/** These defines should be changed to your systems concept of 100ms **/ -/** **/ -/*****************************************************************************/ - -#define UBCSP_POLL_TIME_IMMEDIATE 0 -#define UBCSP_POLL_TIME_DELAY 25 - -/*****************************************************************************/ -/*****************************************************************************/ -/*****************************************************************************/ +/* + * + * BlueZ - Bluetooth protocol stack for Linux + * + * Copyright (C) 2000-2005 CSR Ltd. + * + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef UBCSP_INCLUDE_H +#define UBCSP_INCLUDE_H + +/*****************************************************************************/ +/*****************************************************************************/ +/*****************************************************************************/ +/** **/ +/** ubcsp.h **/ +/** **/ +/** MicroBCSP - a very low cost implementation of the BCSP protocol **/ +/** **/ +/*****************************************************************************/ + +/* If we wish to use CRC's, then change 0 to 1 in the next line */ +#define UBCSP_CRC 1 + +/* Define some basic types - change these for your architecture */ +typedef unsigned char uint8; +typedef unsigned short uint16; +typedef unsigned int uint32; +typedef signed char int8; +typedef signed short int16; +typedef signed int int32; + +/* The defines below require a printf function to be available */ + +/* Do we want to show packet errors in debug output */ +#define SHOW_PACKET_ERRORS 0 + +/* Do we want to show Link Establishment State transitions in debug output */ +#define SHOW_LE_STATES 0 + +/*****************************************************************************/ +/** **/ +/** ubcsp_packet **/ +/** **/ +/** This is description of a bcsp packet for the upper layer **/ +/** **/ +/*****************************************************************************/ + +struct ubcsp_packet +{ + uint8 channel; /* Which Channel this packet is to/from */ + uint8 reliable; /* Is this packet reliable */ + uint8 use_crc; /* Does this packet use CRC data protection */ + uint16 length; /* What is the length of the payload data */ + uint8 *payload; /* The payload data itself - size of length */ +}; + +/*****************************************************************************/ +/** **/ +/** ubcsp_configuration **/ +/** **/ +/** This is the main configuration of the ubcsp engine **/ +/** All state variables are stored in this structure **/ +/** **/ +/*****************************************************************************/ + +enum ubcsp_link_establishment_state +{ + ubcsp_le_uninitialized, + ubcsp_le_initialized, + ubcsp_le_active +}; + +enum ubcsp_link_establishment_packet +{ + ubcsp_le_sync, + ubcsp_le_sync_resp, + ubcsp_le_conf, + ubcsp_le_conf_resp, + ubcsp_le_none +}; + +struct ubcsp_configuration +{ + uint8 link_establishment_state; + uint8 link_establishment_resp; + uint8 link_establishment_packet; + + uint8 sequence_number:3; + uint8 ack_number:3; + uint8 send_ack; + struct ubcsp_packet *send_packet; + struct ubcsp_packet *receive_packet; + + uint8 receive_header_checksum; + uint8 receive_slip_escape; + int32 receive_index; + + uint8 send_header_checksum; +#ifdef UBCSP_CRC + uint8 need_send_crc; + uint16 send_crc; +#endif + uint8 send_slip_escape; + + uint8 *send_ptr; + int32 send_size; + uint8 *next_send_ptr; + int32 next_send_size; + + int8 delay; +}; + +/*****************************************************************************/ +/** **/ +/** ubcsp_poll sets activity from an OR of these flags **/ +/** **/ +/*****************************************************************************/ + +#define UBCSP_PACKET_SENT 0x01 +#define UBCSP_PACKET_RECEIVED 0x02 +#define UBCSP_PEER_RESET 0x04 +#define UBCSP_PACKET_ACK 0x08 + +/*****************************************************************************/ +/** **/ +/** This is the functional interface for ucbsp **/ +/** **/ +/*****************************************************************************/ + +void ubcsp_initialize (void); +void ubcsp_send_packet (struct ubcsp_packet *send_packet); +void ubcsp_receive_packet (struct ubcsp_packet *receive_packet); +uint8 ubcsp_poll (uint8 *activity); + +/*****************************************************************************/ +/** **/ +/** Slip Escape Values **/ +/** **/ +/*****************************************************************************/ + +#define SLIP_FRAME 0xC0 +#define SLIP_ESCAPE 0xDB +#define SLIP_ESCAPE_FRAME 0xDC +#define SLIP_ESCAPE_ESCAPE 0xDD + +/*****************************************************************************/ +/*****************************************************************************/ +/*****************************************************************************/ + +/*****************************************************************************/ +/** **/ +/** These functions need to be linked into your system **/ +/** **/ +/*****************************************************************************/ + +/*****************************************************************************/ +/** **/ +/** put_uart outputs a single octet over the UART Tx line **/ +/** **/ +/*****************************************************************************/ + +extern void put_uart (uint8); + +/*****************************************************************************/ +/** **/ +/** get_uart receives a single octet over the UART Rx line **/ +/** if no octet is available, then this returns 0 **/ +/** if an octet was read, then this is returned in the argument and **/ +/** the function returns 1 **/ +/** **/ +/*****************************************************************************/ + +extern uint8 get_uart (uint8 *); + +/*****************************************************************************/ +/** **/ +/** These defines should be changed to your systems concept of 100ms **/ +/** **/ +/*****************************************************************************/ + +#define UBCSP_POLL_TIME_IMMEDIATE 0 +#define UBCSP_POLL_TIME_DELAY 25 + +/*****************************************************************************/ +/*****************************************************************************/ +/*****************************************************************************/ #endif -- 1.7.0.4