Return-Path: From: pavan_savoy@ti.com To: gregkh@suse.de, linux-kernel@vger.kernel.org Cc: padovan@profusion.mobi, marcel@holtmann.org, linux-bluetooth@vger.kernel.org, Pavan Savoy Subject: [PATCH 2/2] drivers:staging: ti-st: update the TI ST BT driver Date: Tue, 14 Dec 2010 06:06:40 -0600 Message-Id: <1292328400-7649-3-git-send-email-pavan_savoy@ti.com> In-Reply-To: <1292328400-7649-2-git-send-email-pavan_savoy@ti.com> References: <1292328400-7649-1-git-send-email-pavan_savoy@ti.com> <1292328400-7649-2-git-send-email-pavan_savoy@ti.com> List-ID: From: Pavan Savoy Update the bluetooth driver for TI-ST with the latest bluetooth btwilink driver v7, which had undergone several reviews. The driver by itself was un-acceptable because of certain design/architecture in the underlying TI ST driver. So, park this driver here, as plans to work on the underlying driver layer (TI-ST) is carried out. Signed-off-by: Pavan Savoy --- drivers/staging/ti-st/Kconfig | 13 ++ drivers/staging/ti-st/Makefile | 1 + drivers/staging/ti-st/btwilink.c | 363 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 377 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/ti-st/Kconfig create mode 100644 drivers/staging/ti-st/Makefile create mode 100644 drivers/staging/ti-st/btwilink.c diff --git a/drivers/staging/ti-st/Kconfig b/drivers/staging/ti-st/Kconfig new file mode 100644 index 0000000..3cf6c3e --- /dev/null +++ b/drivers/staging/ti-st/Kconfig @@ -0,0 +1,13 @@ +menu "Texas Instruments shared transport line discipline" +config BT_WILINK + tristate "Texas Instruments WiLink7 driver" + depends on TI_ST + help + This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS + combo devices. This makes use of shared transport line discipline + core driver to communicate with the BT core of the combo chip. + + Say Y here to compile support for Texas Instrument's WiLink7 driver + into the kernel or say M to compile it as module. + endmenu + diff --git a/drivers/staging/ti-st/Makefile b/drivers/staging/ti-st/Makefile new file mode 100644 index 0000000..8b8a795 --- /dev/null +++ b/drivers/staging/ti-st/Makefile @@ -0,0 +1 @@ ++obj-$(CONFIG_BT_WILINK) += btwilink.o diff --git a/drivers/staging/ti-st/btwilink.c b/drivers/staging/ti-st/btwilink.c new file mode 100644 index 0000000..71e69f8 --- /dev/null +++ b/drivers/staging/ti-st/btwilink.c @@ -0,0 +1,363 @@ +/* + * Texas Instrument's Bluetooth Driver For Shared Transport. + * + * Bluetooth Driver acts as interface between HCI core and + * TI Shared Transport Layer. + * + * Copyright (C) 2009-2010 Texas Instruments + * Author: Raja Mani + * Pavan Savoy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include + +#include + +/* Bluetooth Driver Version */ +#define VERSION "1.0" + +/* Number of seconds to wait for registration completion + * when ST returns PENDING status. + */ +#define BT_REGISTER_TIMEOUT 6000 /* 6 sec */ + +/** + * struct ti_st - driver operation structure + * @hdev: hci device pointer which binds to bt driver + * @reg_status: ST registration callback status + * @st_write: write function provided by the ST driver + * to be used by the driver during send_frame. + * @wait_reg_completion - completion sync between ti_st_open + * and ti_st_registration_completion_cb. + */ +struct ti_st { + struct hci_dev *hdev; + char reg_status; + long (*st_write) (struct sk_buff *); + struct completion wait_reg_completion; +}; + +/* Increments HCI counters based on pocket ID (cmd,acl,sco) */ +static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type) +{ + struct hci_dev *hdev = hst->hdev; + + /* Update HCI stat counters */ + switch (pkt_type) { + case HCI_COMMAND_PKT: + hdev->stat.cmd_tx++; + break; + + case HCI_ACLDATA_PKT: + hdev->stat.acl_tx++; + break; + + case HCI_SCODATA_PKT: + hdev->stat.sco_tx++; + break; + } +} + +/* ------- Interfaces to Shared Transport ------ */ + +/* Called by ST layer to indicate protocol registration completion + * status.ti_st_open() function will wait for signal from this + * API when st_register() function returns ST_PENDING. + */ +static void st_registration_completion_cb(void *priv_data, char data) +{ + struct ti_st *lhst = priv_data; + + /* Save registration status for use in ti_st_open() */ + lhst->reg_status = data; + /* complete the wait in ti_st_open() */ + complete(&lhst->wait_reg_completion); +} + +/* Called by Shared Transport layer when receive data is + * available */ +static long st_receive(void *priv_data, struct sk_buff *skb) +{ + struct ti_st *lhst = priv_data; + int err; + + if (!skb) + return -EFAULT; + + if (!lhst) { + kfree_skb(skb); + return -EFAULT; + } + + skb->dev = (void *) lhst->hdev; + + /* Forward skb to HCI core layer */ + err = hci_recv_frame(skb); + if (err < 0) { + BT_ERR("Unable to push skb to HCI core(%d)", err); + return err; + } + + lhst->hdev->stat.byte_rx += skb->len; + + return 0; +} + +/* ------- Interfaces to HCI layer ------ */ +/* protocol structure registered with shared transport */ +static struct st_proto_s ti_st_proto = { + .type = ST_BT, + .recv = st_receive, + .reg_complete_cb = st_registration_completion_cb, +}; + +/* Called from HCI core to initialize the device */ +static int ti_st_open(struct hci_dev *hdev) +{ + unsigned long timeleft; + struct ti_st *hst; + int err; + + BT_DBG("%s %p", hdev->name, hdev); + if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) { + BT_ERR("btwilink already opened"); + return -EBUSY; + } + + /* provide contexts for callbacks from ST */ + hst = hdev->driver_data; + ti_st_proto.priv_data = hst; + + err = st_register(&ti_st_proto); + if (err == -EINPROGRESS) { + /* ST is busy with either protocol registration or firmware + * download. + */ + /* Prepare wait-for-completion handler data structures. + */ + init_completion(&hst->wait_reg_completion); + + /* Reset ST registration callback status flag , this value + * will be updated in ti_st_registration_completion_cb() + * function whenever it called from ST driver. + */ + hst->reg_status = -EINPROGRESS; + + BT_DBG("waiting for registration completion signal from ST"); + timeleft = wait_for_completion_timeout + (&hst->wait_reg_completion, + msecs_to_jiffies(BT_REGISTER_TIMEOUT)); + if (!timeleft) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("Timeout(%d sec),didn't get reg " + "completion signal from ST", + BT_REGISTER_TIMEOUT / 1000); + return -ETIMEDOUT; + } + + /* Is ST registration callback called with ERROR status? */ + if (hst->reg_status != 0) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("ST registration completed with invalid " + "status %d", hst->reg_status); + return -EAGAIN; + } + err = 0; + } else if (err != 0) { + clear_bit(HCI_RUNNING, &hdev->flags); + BT_ERR("st_register failed %d", err); + return err; + } + + /* ti_st_proto.write is filled up by the underlying shared + * transport driver upon registration + */ + hst->st_write = ti_st_proto.write; + if (!hst->st_write) { + BT_ERR("undefined ST write function"); + clear_bit(HCI_RUNNING, &hdev->flags); + + /* Undo registration with ST */ + err = st_unregister(ST_BT); + if (err) + BT_ERR("st_unregister() failed with error %d", err); + + hst->st_write = NULL; + return err; + } + + return err; +} + +/* Close device */ +static int ti_st_close(struct hci_dev *hdev) +{ + int err; + struct ti_st *hst = hdev->driver_data; + + if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) + return 0; + + /* continue to unregister from transport */ + err = st_unregister(ST_BT); + if (err) + BT_ERR("st_unregister() failed with error %d", err); + + hst->st_write = NULL; + + return err; +} + +static int ti_st_send_frame(struct sk_buff *skb) +{ + struct hci_dev *hdev; + struct ti_st *hst; + long len; + + hdev = (struct hci_dev *)skb->dev; + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -EBUSY; + + hst = hdev->driver_data; + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + + BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, + skb->len); + + /* Insert skb to shared transport layer's transmit queue. + * Freeing skb memory is taken care in shared transport layer, + * so don't free skb memory here. + */ + len = hst->st_write(skb); + if (len < 0) { + kfree_skb(skb); + BT_ERR("ST write failed (%ld)", len); + /* Try Again, would only fail if UART has gone bad */ + return -EAGAIN; + } + + /* ST accepted our skb. So, Go ahead and do rest */ + hdev->stat.byte_tx += len; + ti_st_tx_complete(hst, bt_cb(skb)->pkt_type); + + return 0; +} + +static void ti_st_destruct(struct hci_dev *hdev) +{ + BT_DBG("%s", hdev->name); + kfree(hdev->driver_data); +} + +static int bt_ti_probe(struct platform_device *pdev) +{ + static struct ti_st *hst; + struct hci_dev *hdev; + int err; + + hst = kzalloc(sizeof(struct ti_st), GFP_KERNEL); + if (!hst) + return -ENOMEM; + + /* Expose "hciX" device to user space */ + hdev = hci_alloc_dev(); + if (!hdev) { + kfree(hst); + return -ENOMEM; + } + + BT_DBG("hdev %p", hdev); + + hst->hdev = hdev; + hdev->bus = HCI_UART; + hdev->driver_data = hst; + hdev->open = ti_st_open; + hdev->close = ti_st_close; + hdev->flush = NULL; + hdev->send = ti_st_send_frame; + hdev->destruct = ti_st_destruct; + hdev->owner = THIS_MODULE; + + err = hci_register_dev(hdev); + if (err < 0) { + BT_ERR("Can't register HCI device error %d", err); + kfree(hst); + hci_free_dev(hdev); + return err; + } + + BT_DBG("HCI device registered (hdev %p)", hdev); + + dev_set_drvdata(&pdev->dev, hst); + return err; +} + +static int bt_ti_remove(struct platform_device *pdev) +{ + struct hci_dev *hdev; + struct ti_st *hst = dev_get_drvdata(&pdev->dev); + + if (!hst) + return -EFAULT; + + hdev = hst->hdev; + ti_st_close(hdev); + hci_unregister_dev(hdev); + + hci_free_dev(hdev); + kfree(hst); + + dev_set_drvdata(&pdev->dev, NULL); + return 0; +} + +static struct platform_driver btwilink_driver = { + .probe = bt_ti_probe, + .remove = bt_ti_remove, + .driver = { + .name = "btwilink", + .owner = THIS_MODULE, + }, +}; + +/* ------- Module Init/Exit interfaces ------ */ +static int __init btwilink_init(void) +{ + BT_INFO("Bluetooth Driver for TI WiLink - Version %s", VERSION); + + return platform_driver_register(&btwilink_driver); +} + +static void __exit btwilink_exit(void) +{ + platform_driver_unregister(&btwilink_driver); +} + +module_init(btwilink_init); +module_exit(btwilink_exit); + +/* ------ Module Info ------ */ + +MODULE_AUTHOR("Raja Mani "); +MODULE_DESCRIPTION("Bluetooth Driver for TI Shared Transport" VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); -- 1.6.3.3