Return-Path: Message-ID: <4D51AE5C.5020006@codeaurora.org> Date: Tue, 08 Feb 2011 12:58:04 -0800 From: Brian Gix MIME-Version: 1.0 To: Anderson Lizardo CC: BlueZ development Subject: Re: Read Characteristic Value vs. Read Long Characteristic Values References: <1295984785.2656.98.camel@ubuntuLab1> <1296064762.2656.137.camel@ubuntuLab1> <1296071867.2656.202.camel@ubuntuLab1> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Anderson, On 2/8/2011 12:46 PM, Anderson Lizardo wrote: > Hi Brian, > > On Wed, Jan 26, 2011 at 4:57 PM, Brian Gix wrote: >> I will talk to the PTS guys at UPF, and make sure that the PIXIT lists >> are setup such that the tests required for qualification correctly >> mandate the correct subset of test cases as required by the ruling >> specification. > > Did you manage to get some input from PTS guys on these tests? I did > not check the recently released 4.2.0 yet. > > Regards, I was talking to the guy who wrote most of the GATT tests, and he said that the test for "Read Long" in particular should Pass wether it was initiated with a standard READ or READ_BLOB. He said that if the test does not work that way, to send him a PTS log of the particular test session that did not work as expected (that test or any other). I will try to get the exact email address to use for PTS log submissions and get back to you. -- Brian Gix bgix@codeaurora.org Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum