Return-Path: From: Ed Tomlinson To: corey@kansanian.com Subject: Re: Linux 2.6.39 Date: Thu, 26 May 2011 06:47:55 -0400 Cc: Ville Tervo , wyrles@ytram.com, "Cufi, Carles" , Bluettooth Linux , linux-kernel@vger.kernel.org References: <20110526083746.GT2480@null> In-Reply-To: MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Message-Id: <201105260647.55949.edt@aei.ca> Sender: linux-kernel-owner@vger.kernel.org List-ID: On Thursday 26 May 2011 06:17:20 Corey Boyle wrote: > On Thu, May 26, 2011 at 4:37 AM, Ville Tervo wrote: > > On Wed, May 25, 2011 at 09:11:19PM -0400, ext Corey Boyle wrote: > >> On Wed, May 25, 2011 at 12:31 PM, Tom Allebrandi wrote: > >> > -----Original Message----- > >> > From: linux-bluetooth-owner@vger.kernel.org > >> > [mailto:linux-bluetooth-owner@vger.kernel.org] On Behalf Of Cufi, Carles > >> > Sent: Wednesday, May 25, 2011 7:15 AM > >> > To: corey@kansanian.com > >> > Cc: Ed Tomlinson; Ville Tervo; Bluettooth Linux; > >> > linux-kernel@vger.kernel.org > >> > Subject: RE: Linux 2.6.39 > >> > > >> > (Snipping...) > >> > On Wed, May 25, 2011 at 8:46 AM, Cufi, Carles > >> > wrote: > >> >> On Wednesday 25 May 2011 07:36:14 Ville Tervo wrote: > >> >>> On Wed, May 25, 2011 at 07:11:17AM -0400, ext Ed Tomlinson wrote: > >> >>> > On Wednesday 25 May 2011 06:54:54 Corey Boyle wrote: > >> >>> > > > On Mon, May 23, 2011 at 06:08:36PM -0400, ext Ed Tomlinson wrote: > >> >>> > > > > On Saturday 21 May 2011 16:31:00 Ed Tomlinson wrote: > >> >>> > > > > > On Saturday 21 May 2011 13:56:20 Milan Oravec wrote: > >> > ... > >> >>> > Read Local Version Information (0x04|0x0001) plen 0 > >> >>> > > HCI Event: Command Complete (0x0e) plen 12 > >> >>> > Read Local Version Information (0x04|0x0001) ncmd 1 > >> >>> > status 0x00 > >> >>> > HCI Version: 1.1 (0x1) HCI Revision: 0x20d > >> > ************************* > >> >>> > LMP Version: 1.1 (0x1) LMP Subversion: 0x20d > >> > ************************* > >> >>> > Manufacturer: Cambridge Silicon Radio (10) < HCI Command: Set > >> >>> > Event Mask (0x03|0x0001) plen 8 > >> >>> > Mask: 0xfffffbff00000000 > >> > ************************* > >> >>> > > HCI Event: Command Complete (0x0e) plen 4 > >> >>> > Set Event Mask (0x03|0x0001) ncmd 1 > >> >>> > status 0x12 > >> >>> > Error: Invalid HCI Command Parameters > >> >> > >> >>Set Event Mask has been in the Bluetooth Spec since day 1, so it must be > >> > the bitmask, which has been extended with each new spec release to cover > >> > newly >added events. Looking at the latest spec, and judging by the year > >> > your chipset was released in (it probably is a 1.1 compliant chipset) I > >> > believe that >0x000000008FFFFFFF is the highest event mask it would support > >> > (up until and including Page Scan Repetition Mode Change Event), but since I > >> > don't have the >old 1.1 spec around I may be one or two bits off. > >> > > >> > The device appears to have identified itself as CSR firmware using Bluetooth > >> > version 1.1. > >> > > >> > I do happen to have the 1.1 spec lying around :-), for Set_Event_Mask it > >> > says > >> > > >> > 0x0000000100000000 > >> > To Reserved for future use > >> > 0x8000000000000000 > >> > > >> > 0x00000000FFFFFFFF Default (All events enabled) > >> > > >> > >> I am beginning to think that my adapter simply does not support this > >> command. I have tried with all the suggested bitmasks, all zeros, all > >> ones, all combinations where a single bit is set, etc. I'm not sure > >> where to go from here other than add a flag which incidates that > >> certain devices don't support this command so it can be skipped. > >> Again, the only way I have gotten it to work is by not sending the > >> command at all. Thoughts? > > > > I also played a bit with 1.1 CSR dongle and couldn't find any mask that would > > be accepted. I think this command can be left out for older than 1.2 devices. > > > > Following patch should do it. Could you verify it. I don't have access to old > > hw ATM. > > > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c > > index 19cd4af..86d1e26 100644 > > --- a/net/bluetooth/hci_event.c > > +++ b/net/bluetooth/hci_event.c > > @@ -477,14 +477,16 @@ static void hci_setup_event_mask(struct hci_dev *hdev) > > * command otherwise */ > > u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; > > > > - /* Events for 1.2 and newer controllers */ > > - if (hdev->lmp_ver > 1) { > > - events[4] |= 0x01; /* Flow Specification Complete */ > > - events[4] |= 0x02; /* Inquiry Result with RSSI */ > > - events[4] |= 0x04; /* Read Remote Extended Features Complete */ > > - events[5] |= 0x08; /* Synchronous Connection Complete */ > > - events[5] |= 0x10; /* Synchronous Connection Changed */ > > - } > > + /* CSR 1.1 dongles does not accept any bitfield so don't try to set > > + * any event mask for pre 1.2 devices */ > > + if (hdev->lmp_ver <= 1) > > + return; > > + > > + events[4] |= 0x01; /* Flow Specification Complete */ > > + events[4] |= 0x02; /* Inquiry Result with RSSI */ > > + events[4] |= 0x04; /* Read Remote Extended Features Complete */ > > + events[5] |= 0x08; /* Synchronous Connection Complete */ > > + events[5] |= 0x10; /* Synchronous Connection Changed */ > > > > if (hdev->features[3] & LMP_RSSI_INQ) > > events[4] |= 0x04; /* Inquiry Result with RSSI */ > > -- > > > > > > Patch works great - typing this email from my bluetooth keyboard. Works here too. Thanks Ed