Return-Path: <cyrus@holtmann.org>
Message-ID: <4E03DA75.2080606@goop.org>
Date: Thu, 23 Jun 2011 17:29:41 -0700
From: Jeremy Fitzhardinge <jeremy@goop.org>
MIME-Version: 1.0
To: linux-bluetooth@vger.kernel.org
CC: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Linux 3.0-rc4: regression reconnecting bluetooth headset (A2DP fails)
Content-Type: text/plain; charset=UTF-8
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-bluetooth.vger.kernel.org>

I have a Nokia BH-905i headset.  With a stock F15 kernel, it all works
well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep
twice; I think this is one beep per profile, and its only connecting HSP
and failing A2DP.  In the sound control panel, it either comes up with
"profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP,
and it fails to switch if I try to change profiles via the sound control
panel.

However, if I re-pair the device from scratch each time I use it, it
connects properly and it all works fine.

pactl list shows:

Card #2
	Name: bluez_card.00_0B_E4_A6_6C_0D
	Driver: module-bluetooth-device.c
	Owner Module: 23
	Properties:
		device.description = "Nokia BH-905i"
		device.string = "00:0B:E4:A6:6C:0D"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D"
		bluez.class = "0x240404"
		bluez.name = "Nokia BH-905i"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	Profiles:
		a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
		hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
		off: Off (sinks: 0, sources: 0, priority. 0)
	Active Profile: hsp

If I try to switch profiles on the command line it says:
$ pactl set-card-profile 2 a2dp
Failure: Input/Output error

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Why isn't A2DP connecting?  How can I debug this further?

Thanks,
	J