Return-Path: MIME-Version: 1.0 Message-ID: <70c3591.c7ad04bfd88fbba33e950f8f2a7c3fd4@1oca1host.de> From: thilo@cestona.ro To: "Marcel Holtmann" Cc: linux-bluetooth@vger.kernel.org Subject: AW: Re: Support for 0489:e031 Foxconn / Hon Hai Date: Thu, 9 Jun 2011 13:45:44 +0200 (CEST) Content-Type: text/plain; charset="utf-8" List-ID: Hey Marcel, >> Here is the output of hciconfig hci0 -a: >> $ hciconfig hci0 -a >> hci0:=09Type: BR/EDR Bus: USB >> =09BD Address: EC:55:F9:EA:DE:09 ACL MTU: 1021:8 SCO MTU: 64:1 >> =09UP RUNNING PSCAN ISCAN >> =09RX bytes:5947 acl:0 sco:0 events:198 errors:0 >> =09TX bytes:1986 acl:0 sco:0 commands:117 errors:0 >> =09Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x7b 0x87 >> =09Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 >> =09Link policy: RSWITCH HOLD SNIFF PARK >> =09Link mode: SLAVE ACCEPT >> =09Name: 'abg4858n-lnx' >> =09Class: 0x4a0100 >> =09Service Classes: Networking, Capturing, Telephony >> =09Device Class: Computer, Uncategorized >> =09HCI Version: 4.0 (0x6) Revision: 0x0 >> =09LMP Version: 4.0 (0x6) Subversion: 0x2118 >> =09Manufacturer: Broadcom Corporation (15) >> >> Looks ok isn't it? > >Yes, and getting a nice Low-Energy capable dongle is great. Where did >you get this from? I like to get a bunch of these for testing. It's build-in into the Lifebook E751 of Fujitsu (when ordered with Bluet= ooth). The product page for the E751: http://lifebook.uk.ts.fujitsu.com/Product= s/Performance/LIFEBOOK-E751.htm More an advertisment page ;) ... and the only thing about Bluetooth is t= his sentence: "Ultimate connectivity with optional embedded 3G/UMTS, WLA= N and Bluetooth=C2=AE" >> But I can't add any devices. When I search for devices VERY long, I c= an find one or two. But only devices which I can't pair with. >> e.g. I never found my headset, altought it is in pairing mode when I = start searching. >> >> During search, hcidump -v shows only this: >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> > HCI Event: Inquiry Complete (0x01) plen 1 >> status 0x00 >> >> so no problem here too. >> >> Any suggestions what I could try next? Anything which could give me i= nformations whats going wrong here? > >Maybe the antenna is kinda wrongly calibrated, but I can't tell any >details here. That is hardware specific. So you think it's not connected correctly or what means wrongly calibrat= ed? Perhaps I can give it a try via Virtualbox under windows ... Ciao Thilo