Return-Path: Subject: [PATCH v3] Add USB ID of HP's Broadcom BCM2035 Bluetooth From: Albert Pool To: marcel@holtmann.org, padovan@profusion.mobi Cc: linux-bluetooth@vger.kernel.org Content-Type: text/plain; charset="UTF-8" Date: Sat, 24 Dec 2011 13:01:04 +0100 Message-ID: <1324728064.3074.5.camel@albert-ASUSTeK-P4P800SE> Mime-Version: 1.0 List-ID: Add USB ID of HP's Broadcom BCM2035 Bluetooth 03f0:011d >From usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=03f0 ProdID=011d Rev=00.17 S: Manufacturer=Broadcom S: Product=HP integrated Bluetooth module C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by: Albert Pool - - - It now pairs to my laptop (which has the other HP device 03f0:171d) but does not yet pair to my desktop with 0a12:0001 Cambridge Silicon Radio dongle. I've also tried using BTUSB_WRONG_SCO_MTU, but with that setting it often failed to enable the device. This patch is at least an improvement as it used to pair to nothing at all. Perhaps anyone knows a better solution with which it pairs to everything just like on Windows XP? --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -142,7 +142,8 @@ static struct usb_device_id blacklist_ta { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, - /* HP laptop with Broadcom chip */ + /* HP laptops with Broadcom chip */ + { USB_DEVICE(0x03f0, 0x011d), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Dell laptop with Broadcom chip */