Return-Path: MIME-Version: 1.0 In-Reply-To: <20111101161549.GG2580@joana> References: <944af9667334f5677be87e89fe8f38486823cc95.1320139612.git.acho@suse.com> <20111101161549.GG2580@joana> Date: Mon, 12 Dec 2011 16:43:29 +0800 Message-ID: Subject: Re: [PATCH 1/3] add device entry for Broadcom Valentine combo card From: Al Cho To: "Cho, Yu-Chen" , marcel@holtmann.org, linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org, acho@novell.com, jlee@novell.com, oneukum@suse.com, jlee@suse.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Gustavo, Sorry I lost and late to reply this mail. On Wed, Nov 2, 2011 at 12:15 AM, Gustavo Padovan wrote: > Hi Yu-Chen, > > * Cho, Yu-Chen [2011-11-01 17:33:05 +0800]: > >> This device declares itself to be vendor specific >> It therefore needs to be added to the device table >> to make btusb bind. >> >> Signed-off-by: Cho, Yu-Chen >> --- >> ?drivers/bluetooth/btusb.c | ? ?4 ++++ >> ?1 files changed, 4 insertions(+), 0 deletions(-) > > Ok, but where is the output of usb-devices that I asked. Thanks. > > ? ? ? ? Gustavo > T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=889FFAABE086 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Please correct me if i got any mistake. Sincerely, AL