Return-Path: Sender: "Gustavo F. Padovan" Date: Tue, 21 Feb 2012 17:06:54 -0200 From: Gustavo Padovan To: Keng-Yu Lin Cc: Marcel Holtmann , linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2] Bluetooth: Add AR30XX device ID on Asus laptops Message-ID: <20120221190654.GB2914@joana> References: <1321422409.15441.510.camel@aeonflux> <1322649157-20479-1-git-send-email-kengyu@canonical.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1322649157-20479-1-git-send-email-kengyu@canonical.com> List-ID: Hi Keng, * Keng-Yu Lin [2011-11-30 18:32:37 +0800]: > The ID is found on Asus K54HR and K53U. > Blacklist the AR3011-based device ID [0489:e03d] > and add to ath3k.c for firmware loading. > > Below is the output of usb-devices script: > > Before the fiwmware loading: > > T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e03d Rev=00.01 > C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > After the fiwmware loading: > > T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0cf3 ProdID=3005 Rev=00.01 > C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > Signed-off-by: Keng-Yu Lin > --- > drivers/bluetooth/ath3k.c | 1 + > drivers/bluetooth/btusb.c | 1 + > 2 files changed, 2 insertions(+), 0 deletions(-) Applied, thanks. Gustavo