Return-Path: Date: Wed, 2 May 2012 19:58:15 -0300 From: Gustavo Padovan To: Steffen Becker Cc: linux-bluetooth@vger.kernel.org Subject: Re: Can't connect Bluetooth Devices Message-ID: <20120502225815.GE16030@joana> References: <4F968FF7.7060303@tu-ilmenau.de> <4FA1BB1C.6060409@tu-ilmenau.de> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Zs/RYxT/hKAHzkfQ" In-Reply-To: <4FA1BB1C.6060409@tu-ilmenau.de> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: --Zs/RYxT/hKAHzkfQ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Steffen, * Steffen Becker [2012-05-03 00:54:20 +0200]: > Hello everyone, >=20 > Am 24.04.2012 13:35, schrieb Steffen Becker: > >Hello, > > > >I still have a problem to connect my bluetooth devices via pand > >command. I've been searching the internet and asked in forums, but > >i didn't get an answer. > > > >I have 2 gentoo-PCs with a Bluetooth-3.0 Dongle at each PC. > >Circa 2 weeks ago, everything worked. BlueZ-4.96 was installed and > >I had no problems to connect my devices via pand and via rfcomm > >command. > >But then I asked you for an SSP debug mode patch, because I wanted > >to sniff my rfcomm connection. At the same time BlueZ-4.99 was > >released and so I installed the new BlueZ-version and the patch. > >I also deleted the stored linkkey and I was happy that I was able > >to sniff my rfcomm-connection. > >But thenceforth I can't connect my devices via pand command. > > > >Then I tried to install the BlueZ-4.99 *without* the patch, but I > >still couldn't connect via pand. > >I also tried to install BlueZ-4.96, but the problem was still the > >same. So I think it's no problem of the patch or the newer > >BlueZ-version, but I really have no idea what's wrong. > > > >If you need any of my configuration-files, just tell me and I will > >send it. > > > >In the end, I show the hcidump message when I try to connect via > >pand command. > > > >Hope anyone can help me. > > > >Regards, > >Steffen > > > > > ># hcidump -i hci0 > >HCI sniffer - Bluetooth packet analyzer ver 2.3 > >device: hci0 snap_len: 1028 filter: 0xffffffffffffffff > >> HCI Event: Connect Request (0x04) plen 10 > > bdaddr 00:02:72:AE:58:73 class 0x420100 type ACL > >< HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > > bdaddr 00:02:72:AE:58:73 role 0x00 > > Role: Master > >> HCI Event: Command Status (0x0f) plen 4 > > Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1 > >> HCI Event: Role Change (0x12) plen 8 > > status 0x00 bdaddr 00:02:72:AE:58:73 role 0x00 > > Role: Master > >> HCI Event: Connect Complete (0x03) plen 11 > > status 0x00 handle 11 bdaddr 00:02:72:AE:58:73 type ACL encrypt 0x00 > >< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > > handle 11 > >> HCI Event: Max Slots Change (0x1b) plen 3 > > handle 11 slots 5 > >> HCI Event: Command Status (0x0f) plen 4 > > Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > >> HCI Event: Read Remote Supported Features (0x0b) plen 11 > > status 0x00 handle 11 > > Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x87 > >< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 > > handle 11 page 1 > >> HCI Event: Command Status (0x0f) plen 4 > > Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > >> HCI Event: Read Remote Extended Features (0x23) plen 13 > > status 0x00 handle 11 page 1 max 1 > > Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > >< HCI Command: Remote Name Request (0x01|0x0019) plen 10 > > bdaddr 00:02:72:AE:58:73 mode 2 clkoffset 0x0000 > >> HCI Event: Command Status (0x0f) plen 4 > > Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > >> HCI Event: Remote Name Req Complete (0x07) plen 255 > > status 0x00 bdaddr 00:02:72:AE:58:73 name 'bluetooth1-0' > >> HCI Event: IO Capability Response (0x32) plen 9 > > bdaddr 00:02:72:AE:58:73 capability 0x03 oob 0x00 auth 0x00 > > Capability: NoInputNoOutput (OOB data not present) > > Authentication: No Bonding (No MITM Protection) > >> HCI Event: IO Capability Request (0x31) plen 6 > > bdaddr 00:02:72:AE:58:73 > >< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 > > bdaddr 00:02:72:AE:58:73 capability 0x03 oob 0x00 auth 0x00 > > Capability: NoInputNoOutput (OOB data not present) > > Authentication: No Bonding (No MITM Protection) > >> HCI Event: Command Complete (0x0e) plen 10 > > IO Capability Request Reply (0x01|0x002b) ncmd 1 > > status 0x00 bdaddr 00:02:72:AE:58:73 > >> HCI Event: User Confirmation Request (0x33) plen 10 > > bdaddr 00:02:72:AE:58:73 passkey 800553 > >< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6 > > bdaddr 00:02:72:AE:58:73 > >> HCI Event: Command Complete (0x0e) plen 10 > > User Confirmation Request Reply (0x01|0x002c) ncmd 1 > > status 0x00 bdaddr 00:02:72:AE:58:73 > >> HCI Event: Simple Pairing Complete (0x36) plen 7 > > status 0x00 bdaddr 00:02:72:AE:58:73 > >> HCI Event: Link Key Notification (0x18) plen 23 > > bdaddr 00:02:72:AE:58:73 key E1C30FE5E1D620AC6DC78BB5A4AC299A type 4 > > Type: Unauthenticated Combination Key > >> HCI Event: Encrypt Change (0x08) plen 4 > > status 0x00 handle 11 encrypt 0x01 > >> ACL data: handle 11 flags 0x02 dlen 10 > > L2CAP(s): Info req: type 2 > >< ACL data: handle 11 flags 0x00 dlen 16 > > L2CAP(s): Info rsp: type 2 result 0 > > Extended feature mask 0x00b8 > > Enhanced Retransmission mode > > Streaming mode > > FCS Option > > Fixed Channels > >> ACL data: handle 11 flags 0x02 dlen 10 > > L2CAP(s): Info req: type 3 > >< ACL data: handle 11 flags 0x00 dlen 20 > > L2CAP(s): Info rsp: type 3 result 0 > > Fixed channel list 0x00000002 > > L2CAP Signalling Channel > >> HCI Event: Number of Completed Packets (0x13) plen 5 > > handle 11 packets 2 > >> ACL data: handle 11 flags 0x02 dlen 12 > > L2CAP(s): Connect req: psm 15 scid 0x0040 > >< ACL data: handle 11 flags 0x00 dlen 16 > > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0 > > Connection pending - No futher information available > >< ACL data: handle 11 flags 0x00 dlen 10 > > L2CAP(s): Info req: type 2 > >> HCI Event: Number of Completed Packets (0x13) plen 5 > > handle 11 packets 2 > >> ACL data: handle 11 flags 0x02 dlen 16 > > L2CAP(s): Info rsp: type 2 result 0 > > Extended feature mask 0x00b8 > > Enhanced Retransmission mode > > Streaming mode > > FCS Option > > Fixed Channels > >< ACL data: handle 11 flags 0x00 dlen 10 > > L2CAP(s): Info req: type 3 > >> ACL data: handle 11 flags 0x02 dlen 20 > > L2CAP(s): Info rsp: type 3 result 0 > > Fixed channel list 0x00000002 > > L2CAP Signalling Channel > >< ACL data: handle 11 flags 0x00 dlen 16 > > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 2 > > Connection pending - Authorization pending > >< ACL data: handle 11 flags 0x00 dlen 16 > > L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 3 status 0 > > Connection refused - security block > >> HCI Event: Number of Completed Packets (0x13) plen 5 > > handle 11 packets 2 > >> HCI Event: Number of Completed Packets (0x13) plen 5 > > handle 11 packets 1 > >> HCI Event: Disconn Complete (0x05) plen 4 > > status 0x00 handle 11 reason 0x13 > > Reason: Remote User Terminated Connection > > > >--=20 > >To unsubscribe from this list: send the line "unsubscribe > >linux-bluetooth" in > >the body of a message to majordomo@vger.kernel.org > >More majordomo info at http://vger.kernel.org/majordomo-info.html >=20 > That's still my problem, but now I have a different question regarding > to that: > As I said, I deleted the stored linkkey to get my rfcomm-connection sniff= ed. > Now I think this (deleting the linkkey) is the problem why I can't > connect via pand. Am I right? > With "deleting" I mean: I just deleted the file "linkkeys" in > /var/lib/bluetooth// >=20 > So my question is: How can I create a new linkkey (so that hopefully my > pand-connection works) ? A linkkey is created during the pairing procedure, just pair your devices and you will be done. And let only bluetoothd touch the /var/lib/bluetooth directory, don't touch there yourself. Gustavo --Zs/RYxT/hKAHzkfQ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAEBAgAGBQJPobwHAAoJEPs3PUX4s20ogIgP/irgJR6YRCdb7qWfaPNN7K0c OUvpf9rap+e7mE9p6hknuxb/XmtnNvxbeYLwSaablxX63r5TKzcbTynpW7ziiYnK 4DCvjGxFHYqbjKV7vVdNzfB/m6NmqCgG1PKCuseet2bZhh8G/nlBfCfsZ6D0br5s 403JesvLl5hkAn1By/hZgv3EBr5z7J6aQaQWA5/uVKkpvFyD9nOWJk37aWSXLgu7 U4ETeRB4z/zN1CJmZVbNAMlfMooD6nEBNtxir2QzKZh/aQhNR07Hw9dyxofo7aWT 2cyFKtaw3+egxgwOizRYKI5t9cybBAWu/TJDY6e4Xjzw+1xiChQM6GITY/fp4ZXn 4HLqXcRTDqpYB7+p6h3pMhjERTWEDO/oHKwzvUtdnoeGo6YNqYeEAMTvE2V20unC KZreNtCUGkAWwlGEcDsStfB5RfnQyGzxiFNW2S2sCKZB/eevpg8B6EhX3lOKBMhY dxHth4y723c/w7rp4W5cyDJ0q8F1W4xX+EWwmERPAiAUmv04gG8gaHov4XRZWfIm Vqdt5bLRpXhpOFcPTAPLV+5AxswjZm2fNIqf0BnS+qKGiHx2v1hX0qbXxomC0gob GRkhD9Hmg4U3+C8OPTObiy/5iMSwoQnckmxQZoKxieibPaD/snw+Jhek1xIWYCtA V4z5+htstvMlYm/KaCA4 =SW13 -----END PGP SIGNATURE----- --Zs/RYxT/hKAHzkfQ--