Return-Path: Message-ID: <503503C1.6060805@globaledgesoft.com> Date: Wed, 22 Aug 2012 12:07:29 -0400 From: Ajay KV MIME-Version: 1.0 To: Anderson Lizardo , linux-bluetooth@vger.kernel.org Subject: Re: BLE - multiple connections References: <5008F67F.5030604@globaledgesoft.com> <502E56DF.3020103@globaledgesoft.com> <502ED4E8.9040702@globaledgesoft.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-bluetooth-owner@vger.kernel.org List-ID: On 08/17/2012 12:27 PM, Anderson Lizardo wrote: > Hi Ajay > > [your emails to BlueZ mailing list may be getting blocked because you > are using HTML. Please fix that on your mail client. Also remember to > not top-post] > > On Fri, Aug 17, 2012 at 7:34 PM, Ajay KV wrote: > >> Thanks for your reply. i have 2 dongles of different made (iogear and >> chirago) . "Hciconfig hci0 lestates" gives this following result >> >> Supported link layer states: >> [...] >> >> Here my issue is to know whether (connected mode + advertising >> mode) is possible at a time . Once A is connected to B (initiator), i >> could not able to enable advertise in A (getting command disallowed ) , so >> that device C is not getting the connectable advertising packets on >> scanning. >> > I could not see any reason to get "command disallowed" when enabling > LE adv. Did you try changing dongle combinations to make sure it is > not some hardware issue? > > Regards, > Hi, i could not able to figure it out yet , why its showing this error " command disallowed" . Here im using fedora 13 with kernel 2.6.39 . i tried with both dongles , iogear and cirago . But the result is same. i dont think that its something wrong with kernel version, as we uses hci commands (hciconfig hci0 leadv ) that directly talks with controller . please clear this issue..