Return-Path: Date: Mon, 1 Oct 2012 13:16:06 +0300 From: Andrei Emeltchenko To: Mat Martineau Cc: linux-bluetooth@vger.kernel.org, gustavo@padovan.org, sunnyk@codeaurora.org Subject: Re: [RFCv1 03/20] Bluetooth: Add L2CAP create channel request handling Message-ID: <20121001101605.GO10053@aemeltch-MOBL1> References: <1347387691-5285-1-git-send-email-mathewm@codeaurora.org> <1347387691-5285-4-git-send-email-mathewm@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1347387691-5285-4-git-send-email-mathewm@codeaurora.org> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Mat, On Tue, Sep 11, 2012 at 11:21:14AM -0700, Mat Martineau wrote: > The L2CAP create channel request is very similar to an L2CAP connect > request, but it has an additional parameter for the controller ID. If > the controller id is 0, the channel is set up on the BR/EDR controller > (just like a connect request). Using a valid high speed controller ID > will cause the channel to be initially created on that high speed > controller. While the L2CAP data will be initially routed over the > AMP controller, the L2CAP fixed signaling channel only uses BR/EDR. > > When a create channel request is received for a high speed controller, > a pending response is always sent first. After the high speed > physical and logical links are complete a success response will be > sent. > > Signed-off-by: Mat Martineau > --- > net/bluetooth/l2cap_core.c | 70 +++++++++++++++++++++++++++++++++++----------- > 1 file changed, 54 insertions(+), 16 deletions(-) > > diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c > index 166382c..17e02d9 100644 > --- a/net/bluetooth/l2cap_core.c > +++ b/net/bluetooth/l2cap_core.c > @@ -3362,8 +3362,9 @@ static inline int l2cap_command_rej(struct l2cap_conn *conn, struct l2cap_cmd_hd > return 0; > } > > -static void __l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, > - u8 *data, u8 rsp_code, u8 amp_id) > +static struct l2cap_chan *__l2cap_connect(struct l2cap_conn *conn, > + struct l2cap_cmd_hdr *cmd, > + u8 *data, u8 rsp_code, u8 amp_id) > { > struct l2cap_conn_req *req = (struct l2cap_conn_req *) data; > struct l2cap_conn_rsp rsp; > @@ -3390,7 +3391,7 @@ static void __l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, > > /* Check if the ACL is secure enough (if not SDP) */ > if (psm != __constant_cpu_to_le16(L2CAP_PSM_SDP) && > - !hci_conn_check_link_mode(conn->hcon)) { > + !hci_conn_check_link_mode(conn->hcon)) { > conn->disc_reason = HCI_ERROR_AUTH_FAILURE; > result = L2CAP_CR_SEC_BLOCK; > goto response; > @@ -3414,6 +3415,7 @@ static void __l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, > bacpy(&bt_sk(sk)->dst, conn->dst); > chan->psm = psm; > chan->dcid = scid; > + chan->local_amp_id = amp_id; > > bt_accept_enqueue(parent, sk); > > @@ -3433,8 +3435,16 @@ static void __l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, > status = L2CAP_CS_AUTHOR_PEND; > parent->sk_data_ready(parent, 0); > } else { > - __l2cap_state_change(chan, BT_CONFIG); > - result = L2CAP_CR_SUCCESS; > + /* Force pending result for AMP controllers. > + * The connection will succeed after the > + * physical link is up. */ > + if (amp_id) { > + __l2cap_state_change(chan, BT_CONNECT2); > + result = L2CAP_CR_PEND; > + } else { > + __l2cap_state_change(chan, BT_CONFIG); > + result = L2CAP_CR_SUCCESS; > + } > status = L2CAP_CS_NO_INFO; > } > } else { > @@ -3480,6 +3490,8 @@ sendresp: > l2cap_build_conf_req(chan, buf), buf); > chan->num_conf_req++; > } > + > + return chan; > } > > static int l2cap_connect_req(struct l2cap_conn *conn, > @@ -3970,12 +3982,12 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm > return 0; > } > > -static inline int l2cap_create_channel_req(struct l2cap_conn *conn, > - struct l2cap_cmd_hdr *cmd, u16 cmd_len, > - void *data) > +static int l2cap_create_channel_req(struct l2cap_conn *conn, > + struct l2cap_cmd_hdr *cmd, u16 cmd_len, > + void *data) > { > struct l2cap_create_chan_req *req = data; > - struct l2cap_create_chan_rsp rsp; > + struct l2cap_chan *chan; > u16 psm, scid; > > if (cmd_len != sizeof(*req)) > @@ -3989,14 +4001,40 @@ static inline int l2cap_create_channel_req(struct l2cap_conn *conn, > > BT_DBG("psm 0x%2.2x, scid 0x%4.4x, amp_id %d", psm, scid, req->amp_id); > > - /* Placeholder: Always reject */ > - rsp.dcid = 0; > - rsp.scid = cpu_to_le16(scid); > - rsp.result = __constant_cpu_to_le16(L2CAP_CR_NO_MEM); > - rsp.status = __constant_cpu_to_le16(L2CAP_CS_NO_INFO); > + if (req->amp_id) { > + struct hci_dev *hdev; > > - l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP, > - sizeof(rsp), &rsp); > + /* Validate AMP controller id */ > + hdev = hci_dev_get(req->amp_id); > + if (!hdev || hdev->dev_type != HCI_AMP || > + !test_bit(HCI_UP, &hdev->flags)) { > + struct l2cap_create_chan_rsp rsp; > + > + rsp.dcid = 0; > + rsp.scid = cpu_to_le16(scid); > + rsp.result = L2CAP_CR_BAD_AMP; > + rsp.status = L2CAP_CS_NO_INFO; > + > + l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP, > + sizeof(rsp), &rsp); > + > + if (hdev) > + hci_dev_put(hdev); > + > + return 0; > + } > + > + hci_dev_put(hdev); > + } > + > + chan = __l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP, > + req->amp_id); > + > + /* Placeholder - uncomment when amp functions are available > + if (chan && req->amp_id && > + (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)) > + amp_accept_physical(conn, req->amp_id, chan); > + */ I believe this comment shall be deleted, we accept physical link long time ago before this sequence. Best regards Andrei Emeltchenko