Return-Path: From: Tedd Ho-Jeong An To: Gustavo Padovan Cc: linux-bluetooth@vger.kernel.org, marcel@holtmann.org, johan.hedberg@intel.com, don.fry@intel.com Subject: Re: [PATCH v4] Bluetooth: Add support for Intel Bluetooth device [8087:07dc] Date: Thu, 18 Apr 2013 09:10:54 -0700 Message-ID: <1466472.WPu0Nr1Sby@tedd-ubuntu> In-Reply-To: <20130418041217.GA28913@joana> References: <3638763.erUlVvs0at@tedd-ubuntu> <20130418041217.GA28913@joana> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" List-ID: Hi Gustavo On Thursday, April 18, 2013 01:12:17 AM Gustavo Padovan wrote: > Hi Tedd, > > * Tedd Ho-Jeong An [2013-04-17 11:47:17 -0700]: > > > From: Tedd Ho-Jeong An > > > > This patch adds support for Intel Bluetooth device by adding > > btusb_setup_intel() routine that update the device with ROM patch. > > > > T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 > > D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > > P: Vendor=8087 ProdID=07dc Rev= 0.01 > > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > > > Signed-off-by: Tedd Ho-Jeong An > > --- > > v4 changes > > - refactored patching routin to separate function > > - changed varaible type for status to u8 > > - corrected minor format issues > > > > drivers/bluetooth/btusb.c | 366 +++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 366 insertions(+) > > > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > > index 3d684d2..52c0ec0 100644 > > --- a/drivers/bluetooth/btusb.c > > +++ b/drivers/bluetooth/btusb.c > > @@ -23,6 +23,7 @@ > > > > #include > > #include > > +#include > > > > #include > > #include > > @@ -47,6 +48,7 @@ static struct usb_driver btusb_driver; > > #define BTUSB_BROKEN_ISOC 0x20 > > #define BTUSB_WRONG_SCO_MTU 0x40 > > #define BTUSB_ATH3012 0x80 > > +#define BTUSB_INTEL 0x100 > > > > static struct usb_device_id btusb_table[] = { > > /* Generic Bluetooth USB device */ > > @@ -207,6 +209,9 @@ static struct usb_device_id blacklist_table[] = { > > /* Frontline ComProbe Bluetooth Sniffer */ > > { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, > > > > + /* Intel Bluetooth device */ > > + { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, > > + > > { } /* Terminating entry */ > > }; > > > > @@ -943,6 +948,364 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev) > > return 0; > > } > > > > +struct intel_version { > > + u8 status; > > + u8 hw_platform; > > + u8 hw_variant; > > + u8 hw_revision; > > + u8 fw_variant; > > + u8 fw_revision; > > + u8 fw_build_num; > > + u8 fw_build_ww; > > + u8 fw_build_yy; > > + u8 fw_patch_num; > > +} __packed; > > + > > +static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, > > + struct intel_version *ver) > > +{ > > + const struct firmware *fw; > > + char fwname[64]; > > + int ret; > > + > > + snprintf(fwname, sizeof(fwname), > > + "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", > > + ver->hw_platform, ver->hw_variant, ver->hw_revision, > > + ver->fw_variant, ver->fw_revision, ver->fw_build_num, > > + ver->fw_build_ww, ver->fw_build_yy); > > + > > + ret = request_firmware(&fw, fwname, &hdev->dev); > > + if (ret < 0) { > > + if (ret == -EINVAL) { > > + BT_ERR("%s Intel firmware file request failed (%d)", > > + hdev->name, ret); > > + return NULL; > > + } > > + > > + BT_ERR("%s failed to open Intel firmware file: %s(%d)", > > + hdev->name, fwname, ret); > > + > > + snprintf(fwname, sizeof(fwname), "intel/ibt-default-%x.%x.bseq", > > + ver->hw_platform, ver->hw_variant); > > + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { > > + BT_ERR("%s failed to open default Intel fw file: %s", > > + hdev->name, fwname); > > + return NULL; > > + } > > + } > > + > > + BT_INFO("%s Intel Bluetooth firmware file: %s", hdev->name, fwname); > > + > > + return fw; > > +} > > + > > +static int btusb_setup_intel_patching(struct hci_dev *hdev, > > + const struct firmware *fw, > > + const u8 **curr_fw_ptr, > > + int *disable_patch) > > +{ > > + struct sk_buff *skb; > > + struct hci_command_hdr *cmd; > > + const u8 *cmd_param; > > + struct hci_event_hdr *evt = NULL; > > + const u8 *evt_param = NULL; > > + const u8 *fw_ptr = *curr_fw_ptr; > > Why do you need an extra var to keep fw_ptr? can't you just use curr_fw_ptr > directly? Yes. I can. I will make a change. > > > + int remain = fw->size - (fw_ptr - fw->data); > > + > > + /* Read command */ > > + if (remain > HCI_COMMAND_HDR_SIZE && > > + fw_ptr[0] != 0x01) { > > Apparently you don't need to break line on the if. ACK. > > > + BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name); > > + return -1; > > Please return a proper error code. ACK. > > > + } > > + fw_ptr++; > > + remain--; > > + > > + cmd = (struct hci_command_hdr *)fw_ptr; > > + fw_ptr += sizeof(*cmd); > > + remain -= sizeof(*cmd); > > + > > + /* checking the length */ > > + if (remain < cmd->plen) { > > + BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name); > > + return -1; > > Same here and all other places you return -1 ACK. > > > + } > > + > > + /* If there is a command that loads a patch in the firmware > > + * file, then enable the patch upon success, otherwise just > > + * disable the manufacturer mode, for example patch activation > > + * is not required when the default firmware patch file is used > > + * because there are no patch data to load. > > + */ > > + if (*disable_patch && cmd->opcode == 0xfc8e) > > + *disable_patch = 0; > > + > > + cmd_param = fw_ptr; > > + fw_ptr += cmd->plen; > > + remain -= cmd->plen; > > + > > + /* Read event */ > > + while (remain > HCI_EVENT_HDR_SIZE && fw_ptr[0] == 0x02) { > > + fw_ptr++; > > + remain--; > > + > > + evt = (struct hci_event_hdr *)fw_ptr; > > + fw_ptr += sizeof(*evt); > > + remain -= sizeof(*evt); > > + > > + if (remain < evt->plen) { > > + BT_ERR("%s Intel fw corrupted: invalid evt len", > > + hdev->name); > > + return -1; > > + } > > + > > + evt_param = fw_ptr; > > + fw_ptr += evt->plen; > > + remain -= evt->plen; > > + } > > + > > + if (!evt || !evt_param || remain < 0) { > > + BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name); > > + return -1; > > + } > > + > > + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), > > + cmd->plen, (void *)cmd_param, evt->evt, > > + HCI_INIT_TIMEOUT); > > + if (IS_ERR(skb)) { > > + BT_ERR("%s sending Intel patch command failed (%ld)", > > + hdev->name, PTR_ERR(skb)); > > + return -1; > > + } > > + > > + /* Checking the returned event */ > > + if (skb->len != evt->plen) { > > + BT_ERR("%s mismatch event length", hdev->name); > > + kfree_skb(skb); > > + return -1; > > + } > > + > > + if (memcmp(skb->data, evt_param, evt->plen)) { > > + BT_ERR("%s mismatch event parameter", hdev->name); > > + kfree_skb(skb); > > + return -1; > > + } > > + kfree_skb(skb); > > + > > + *curr_fw_ptr = fw_ptr; > > + > > + return 0; > > +} > > + > > +static int btusb_setup_intel(struct hci_dev *hdev) > > +{ > > + struct sk_buff *skb; > > + const struct firmware *fw; > > + const u8 *fw_ptr; > > + int disable_patch; > > + struct intel_version *ver; > > + > > + u8 mfg_enable[] = { 0x01, 0x00 }; > > + u8 mfg_disable[] = { 0x00, 0x00 }; > > + u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; > > + u8 mfg_reset_activate[] = { 0x00, 0x02 }; > > + > > + BT_DBG("%s", hdev->name); > > + > > + /* The controller has a bug with the first HCI command send to it > > s/send/sent/ ACK. > > > + * returning number of completed commands as zero. This would stall the > > + * command processing in the Bluetooth core > > + * > > + * As a workaround, send HCI Reset command first which will reset the > > + * number of completed commands and allow normal command processing > > + * from now on > > + */ > > + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); > > + if (IS_ERR(skb)) { > > + BT_ERR("%s sending initial HCI reset command failed (%ld)", > > + hdev->name, PTR_ERR(skb)); > > + return -PTR_ERR(skb); > > + } > > + kfree_skb(skb); > > + > > + /* Read Intel specific controller version first to allow selection of > > + * which firmware file to load. > > + * > > + * The returned information are hardware variant and revision plus > > + * firmware variant, revision and build number. > > + */ > > + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); > > Could you turn 0xfc05 into a macro that we can actually understand My older version of patch used macro but I changed it later due to a comments from others. I will make a change back to use macro. I think that will make the code cleaner. > > > + if (IS_ERR(skb)) { > > + BT_ERR("%s reading Intel fw version command failed (%ld)", > > + hdev->name, PTR_ERR(skb)); > > + return -PTR_ERR(skb); > > + } > > + > > + if (skb->len != sizeof(*ver)) { > > + BT_ERR("%s Intel version event length mismatch", hdev->name); > > + kfree_skb(skb); > > + return 0; > > So why you return 0 here? Orignially, I thought it would be ok to continue the initialization (BT init) even if it received invalid length or status. Actually, if it receives these errors, there must be something wrong in the device and should return with error. I will make a change to return with proper error code. However, please understand that there are a certain cases that I need to return 0 even if the fw patching is not completed. I will carefully review those return case. > > > + } > > + > > + ver = (struct intel_version *)skb->data; > > Is the cast really necessary? > > > + /* was command successful */ > > I would just drop this comment. The 'if' below already tell you that. ACK > > > + if (ver->status) { > > + BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, > > + ver->status); > > + kfree_skb(skb); > > + return 0; > > Here again. Why return 0? Check other places in the function. Same as above. > > > + } > > + > > + BT_INFO("%s read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", > > Add a ":" after the %s for hdev->name ACK > > > + hdev->name, ver->hw_platform, ver->hw_variant, > > + ver->hw_revision, ver->fw_variant, ver->fw_revision, > > + ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy, > > + ver->fw_patch_num); > > + > > + /* is the device already patched */ > > + if (ver->fw_patch_num) { > > + BT_INFO("%s Intel device is already patched. patch num: %02x", > > + hdev->name, ver->fw_patch_num); > > + kfree_skb(skb); > > + return 0; > > + } > > + > > + /* Opens the firmware patch file based on the firmware version read > > + * from the controller. If it failed to open the matching firmware > > + * patch file, it tries to open the default firmware patch file. > > + * If no patch file, allow the device to operate without a patch. > > + */ > > + fw = btusb_setup_intel_get_fw(hdev, ver); > > + if (!fw) { > > + kfree_skb(skb); > > + return 0; > > + } > > + fw_ptr = fw->data; > > + > > + /* This Intel specific command enables the manufacturer mode of the > > + * controller. > > + * > > + * Only while this mode is enabled, the driver can download the > > + * firmware patch data and configuration parameters. > > + */ > > + skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT); > > + if (IS_ERR(skb)) { > > + BT_ERR("%s entering Intel manufacturer mode failed (%ld)", > > + hdev->name, PTR_ERR(skb)); > > Same here ":" after %s. ACK > > > + release_firmware(fw); > > + return -PTR_ERR(skb); > > + } > > + > > + if (skb->data[0]) { > > + u8 evt_status = skb->data[0]; > > + BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", > > + hdev->name, evt_status); > > + kfree_skb(skb); > > + release_firmware(fw); > > + return -bt_to_errno(evt_status); > > + } > > + kfree_skb(skb); > > + > > + disable_patch = 1; > > + > > + /* The firmware data file consists of list of Intel specific HCI > > + * commands and its expected events. The first byte indicates the > > + * type of the message, either HCI command or HCI event. > > + * > > + * It reads the command and its expected event from the firmware file, > > + * and send to the controller. Once __hci_cmd_sync_ev() returns, > > + * the returned event is compared with the event read from the firmware > > + * file and it will continue until all the messages are downloaded to > > + * the controller. > > + * > > + * Once the firmware patching is completed successfully, > > + * the manufacturer mode is disabled with reset and activating the > > + * downloaded patch. > > + * > > + * If the firmware patching is failed, the manufacturer mode is > > s/is failed/fails/ ACK > > > + * disabled with reset and deactivating the patch. > > + * > > + * If the default patch file is used, no reset is done when disabling > > + * the manufacturer. > > + */ > > + while (1) { > > + int ret; > > + > > + ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr, > > + &disable_patch); > > + if (ret < 0) > > + goto exit_mfg_deactivate; > > + > > + /* Checking if EOF */ > > + if (fw->size == fw_ptr - fw->data) { > > + if (disable_patch) > > + goto exit_mfg_disable; > > + else > > + goto exit_mfg_activate; > > + } else if (fw->size < fw_ptr - fw->data) { > > + BT_ERR("%s inconsistent patch read size", hdev->name); > > + goto exit_mfg_deactivate; > > It seems that to make this if true 'remain' has to be < 0 in the other > function and if remain is < 0 the we actually never see this if since the > return of btusb_setup_intel_patching() is < 0 and we goto exit_mfg_deactivate > above. > I was a little coufused at first but I got your point. Yes, you are right. this 'else if' will never be hit. Good point and I will remove it. > Gustavo -- Regards Tedd Ho-Jeong An Intel Corporation