Return-Path: From: Tedd Ho-Jeong An To: linux-bluetooth@vger.kernel.org, marcel@holtmann.org Cc: johan.hedberg@intel.com, don.fry@intel.com, tedd.an@intel.com Subject: [PATCH] Bluetooth: Add support for Intel Bluetooth device [8087:07dc] Date: Thu, 11 Apr 2013 16:31:06 -0700 Message-ID: <3298128.mJ3qNWl1BF@tedd-ubuntu> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" List-ID: From: Tedd Ho-Jeong An This patch adds support for Intel Bluetooth device by adding btusb_setup_intel() routine that update the device with ROM patch. T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07dc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An --- drivers/bluetooth/btusb.c | 332 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 332 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3d684d2..a28fe29 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -47,6 +48,7 @@ static struct usb_driver btusb_driver; #define BTUSB_BROKEN_ISOC 0x20 #define BTUSB_WRONG_SCO_MTU 0x40 #define BTUSB_ATH3012 0x80 +#define BTUSB_INTEL 0x100 static struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -207,6 +209,9 @@ static struct usb_device_id blacklist_table[] = { /* Frontline ComProbe Bluetooth Sniffer */ { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER }, + /* Intel Bluetooth device */ + { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, + { } /* Terminating entry */ }; @@ -943,6 +948,330 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev) return 0; } +static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, + struct sk_buff *skb, + int *use_default) +{ + struct intel_fw_version { + u8 hw_platform; + u8 hw_variant; + u8 hw_revision; + u8 fw_variant; + u8 fw_revision; + u8 fw_build_num; + u8 fw_build_ww; + u8 fw_build_yy; + u8 fw_patch_num; + } __packed; + + struct intel_fw_version *ver; + const struct firmware *fw; + char fwname[64]; + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s invalid length of Intel firmware version %d", + hdev->name, skb->len); + return NULL; + } + + ver = (void *)skb->data; + snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x-%x.bseq", + ver->hw_platform, ver->hw_variant, ver->hw_revision, + ver->fw_variant, ver->fw_revision, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy, ver->fw_patch_num); + kfree_skb(skb); + + *use_default = 0; + + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { + BT_ERR("%s failed to open Intel firmware file: %s", + hdev->name, fwname); + + snprintf(fwname, sizeof(fwname), "intel/ibt-default-%x.bseq", + ver->hw_variant); + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { + BT_ERR("%s failed to open default Intel fw file: %s", + hdev->name, fwname); + return NULL; + } + + *use_default = 1; + } + + BT_INFO("%s Intel Bluetooth firmware file: %s", hdev->name, fwname); + + return fw; +} + +#define INTEL_HCI_MFG_MODE 0xfc11 +#define INTEL_HCI_GET_VER 0xfc05 +#define INTEL_HCI_CMD 0x01 +#define INTEL_HCI_EVT 0x02 + +static int btusb_setup_intel(struct hci_dev *hdev) +{ + struct sk_buff *skb; + const struct firmware *fw; + const u8 *fw_ptr; + int use_default; + + u8 mfg_enable[] = { 0x01, 0x00 }; + u8 mfg_no_reset[] = { 0x00, 0x00 }; + u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; + u8 mfg_reset_activate[] = { 0x00, 0x02 }; + + BT_DBG("%s", hdev->name); + + /* The controller has a bug with the first HCI command send to it + * returning number of completed commands as zero. This would stall the + * command processing in the Bluetooth core + * + * As a workaround, send HCI Reset command first which will reset the + * number of completed commands and allow normal command processing + * from now on + */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending initial HCI reset command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return -PTR_ERR(skb); + } + kfree_skb(skb); + + /* Read Intel specific controller version first to allow selection of + * which firmware file to load. + * + * The returned information are hardware variant and revision plus + * firmware variant, revision and build number. + */ + skb = __hci_cmd_sync(hdev, INTEL_HCI_GET_VER, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s reading Intel fw version command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return -PTR_ERR(skb); + } + + /* was command successful */ + if (skb->data[0]) { + BT_ERR("%s reading Intel fw version event failed (%02x)", + hdev->name, skb->data[0]); + kfree_skb(skb); + return 0; + } + skb_pull(skb, 1); + + /* Opens the firmware patch file based on the firmware version read + * from the controller. If it failed to open the matching firmware + * patch file, it tries to open the default firmware patch file. + * If no patch file, allow the device to operate without a patch. + */ + fw = btusb_setup_intel_get_fw(hdev, skb, &use_default); + if (!fw) + return 0; + + fw_ptr = fw->data; + + /* This Intel specific command enables the manufacturer mode of the + * controller. + * + * Only while this mode is enabled, the driver can download the + * firmware patch data and configuration parameters. + */ + skb = __hci_cmd_sync(hdev, INTEL_HCI_MFG_MODE, 2, mfg_enable, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s entering Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + release_firmware(fw); + return -PTR_ERR(skb); + } + + if (skb->data[0]) { + int evt_status = skb->data[0]; + BT_ERR("%s enable Intel manufacturer mode event failed (%d)", + hdev->name, evt_status); + kfree_skb(skb); + release_firmware(fw); + return -bt_to_errno(evt_status); + } + kfree_skb(skb); + + /* The firmware data file consists of list of Intel specific HCI + * commands and its expected events. The first byte indicates the + * type of the message, either HCI command or HCI event. + * + * It reads the command and its expected event from the firmware file, + * and send to the controller. Once __hci_cmd_sync_ev() returns, + * the returned event is compared with the event read from the firmware + * file and it will continue until all the messages are downloaded to + * the controller. + * + * Once the firmware patching is completed successfully, + * the manufacturer mode is disabled with reset and activating the + * downloaded patch. + * + * If the firmware patching is failed, the manufacturer mode is + * disabled with reset and deactivating the patch. + * + * If the default patch file is used, no reset is done when disabling + * the manufacturer. + */ + while (1) { + struct hci_command_hdr *cmd; + const u8 *cmd_param; + struct hci_event_hdr *evt = NULL; + const u8 *evt_param = NULL; + int remain = fw->size - (fw_ptr - fw->data); + + /* Read command */ + if (remain > HCI_COMMAND_HDR_SIZE && + fw_ptr[0] != INTEL_HCI_CMD) { + BT_ERR("%s Intel fw corrupted: invalid cmd read", + hdev->name); + goto exit_mfg_deactivate; + } + fw_ptr++; + remain--; + + cmd = (struct hci_command_hdr *)fw_ptr; + fw_ptr += sizeof(*cmd); + remain -= sizeof(*cmd); + + /* checking the length */ + if (remain < cmd->plen) { + BT_ERR("%s Intel fw corrupted: invalid cmd len", + hdev->name); + goto exit_mfg_deactivate; + } + + cmd_param = fw_ptr; + fw_ptr += cmd->plen; + remain -= cmd->plen; + + /* Read event */ + while (remain > HCI_EVENT_HDR_SIZE && + fw_ptr[0] == INTEL_HCI_EVT) { + fw_ptr++; + remain--; + + evt = (struct hci_event_hdr *)fw_ptr; + fw_ptr += sizeof(*evt); + remain -= sizeof(*evt); + + if (remain < evt->plen) { + BT_ERR("%s Intel fw corrupted: invalid evt len", + hdev->name); + goto exit_mfg_deactivate; + } + + evt_param = fw_ptr; + fw_ptr += evt->plen; + remain -= evt->plen; + } + + if (!evt || !evt_param || remain < 0) { + BT_ERR("%s Intel fw corrupted: invalid evt read", + hdev->name); + goto exit_mfg_deactivate; + } + + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), + cmd->plen, (void *)cmd_param, evt->evt, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending Intel patch command failed (%ld)", + hdev->name, PTR_ERR(skb)); + goto exit_mfg_deactivate; + } + + /* Checking the returned event */ + if (skb->len != evt->plen) { + BT_ERR("%s mismatch event length", hdev->name); + kfree_skb(skb); + goto exit_mfg_deactivate; + } + + if (memcmp(skb->data, evt_param, evt->plen)) { + BT_ERR("%s mismatch event parameter", hdev->name); + kfree_skb(skb); + goto exit_mfg_deactivate; + } + kfree_skb(skb); + + /* Checking if EOF */ + if (fw->size == fw_ptr - fw->data) { + BT_DBG("%s Intel firmware patching completed", + hdev->name); + + if (use_default) + goto exit_mfg_no_reset; + else + goto exit_mfg_activate; + } else if (fw->size < fw_ptr - fw->data) { + BT_ERR("%s inconsistent patch read size", hdev->name); + goto exit_mfg_deactivate; + } + } + +exit_mfg_activate: + release_firmware(fw); + + /* Reset is done when disabling the manufacturer mode and activate + * the downloaded firmware patches + */ + skb = __hci_cmd_sync(hdev, INTEL_HCI_MFG_MODE, 2, mfg_reset_activate, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return -PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s Intel Bluetooth firmware patch completed and activated", + hdev->name); + + return 0; + +exit_mfg_deactivate: + release_firmware(fw); + + /* Reset is done when disabling the manufacturer mode and deactivate + * the downloaded firmware patches. + */ + skb = __hci_cmd_sync(hdev, INTEL_HCI_MFG_MODE, 2, mfg_reset_deactivate, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return -PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s Intel Bluetooth firmware patch completed and deactivated", + hdev->name); + + return 0; + +exit_mfg_no_reset: + release_firmware(fw); + + /* No reset is done when disabling the manufacturer mode */ + skb = __hci_cmd_sync(hdev, INTEL_HCI_MFG_MODE, 2, mfg_no_reset, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return -PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s Intel Bluetooth firmware patch completed", hdev->name); + + return 0; +} + static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1048,6 +1377,9 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; + if (id->driver_info & BTUSB_INTEL) + hdev->setup = btusb_setup_intel; + /* Interface numbers are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, 1); -- 1.7.9.5 -- Regards Tedd Ho-Jeong An Intel Corporation