Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 6.3 \(1503\)) Subject: Re: [PATCH v1] Bluetooth: Fix incorrect ssp mode bit for non ssp devices From: Marcel Holtmann In-Reply-To: <1365483029-4826-1-git-send-email-jaganath.k@samsung.com> Date: Mon, 8 Apr 2013 21:54:00 -0700 Cc: linux-bluetooth@vger.kernel.org Message-Id: References: <1365483029-4826-1-git-send-email-jaganath.k@samsung.com> To: Jaganath Kanakkassery Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Jaganath, > Some devices send extended inquiry response where as it wont > support ssp in remote extended features. So when we recieve eir, > we set ssp bit in conn flag which we are not clearing in > remote ext features event. So eventually ssp in conn flag will be > incorrectly set. actually it is not allowed to use send EIR data when SSP is disabled. That is not a Bluetooth 2.1 compliant device that you are having here. Can you please list the faulty device in the commit message. > In hci_remote_ext_features_evt(), if ssp is not supported then > we should clear HCI_CONN_SSP_ENABLED in conn flag since it might > have set while initiating acl connection using eir. > > hcidump log > ---------- > > < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 > type 0x01 (active) > interval 11.250ms window 11.250ms > own address: 0x00 (Public) policy: All >> HCI Event: Command Complete (0x0e) plen 4 > LE Set Scan Parameters (0x08|0x000b) ncmd 1 > status 0x00 > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > value 0x01 (scanning enabled) > filter duplicates 0x01 (enabled) >> HCI Event: Command Complete (0x0e) plen 4 > LE Set Scan Enable (0x08|0x000c) ncmd 1 > status 0x00 > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > value 0x00 (scanning disabled) > filter duplicates 0x00 (disabled) >> HCI Event: Command Complete (0x0e) plen 4 > LE Set Scan Enable (0x08|0x000c) ncmd 1 > status 0x00 > < HCI Command: Inquiry (0x01|0x0001) plen 5 > lap 0x9e8b33 len 4 num 0 >> HCI Event: Command Status (0x0f) plen 4 > Inquiry (0x01|0x0001) status 0x00 ncmd 1 >> HCI Event: Extended Inquiry Result (0x2f) plen 255 > bdaddr 00:1B:DC:05:B5:25 mode 1 clkoffset 0x3263 class 0x3c0000 rssi -77 > Unknown type 0x42 with 8 bytes data > Unknown type 0x1e with 2 bytes data >> HCI Event: Inquiry Complete (0x01) plen 1 > status 0x00 > > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:1B:DC:05:B5:25 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 >> HCI Event: Command Status (0x0f) plen 4 > Create Connection (0x01|0x0005) status 0x00 ncmd 1 >> HCI Event: Connect Complete (0x03) plen 11 > status 0x00 handle 12 bdaddr 00:1B:DC:05:B5:25 type ACL encrypt 0x00 > < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > handle 12 >> HCI Event: Command Status (0x0f) plen 4 > Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 >> HCI Event: Read Remote Supported Features (0x0b) plen 11 > status 0x00 handle 12 > Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87 > < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 > handle 12 page 1 >> HCI Event: Command Status (0x0f) plen 4 > Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 >> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > bdaddr 00:1B:DC:05:B5:25 mode 1 >> HCI Event: Max Slots Change (0x1b) plen 3 > handle 12 slots 5 >> HCI Event: Read Remote Extended Features (0x23) plen 13 > status 0x00 handle 12 page 1 max 0 > Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > bdaddr 00:1B:DC:05:B5:25 mode 2 clkoffset 0x0000 >> HCI Event: Command Status (0x0f) plen 4 > Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 >> HCI Event: Remote Name Req Complete (0x07) plen 255 > status 0x00 bdaddr 00:1B:DC:05:B5:25 name 'Bluetooth PTS Radio v4' > < HCI Command: Authentication Requested (0x01|0x0011) plen 2 > handle 12 >> HCI Event: Command Status (0x0f) plen 4 > Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 >> HCI Event: Link Key Request (0x17) plen 6 > bdaddr 00:1B:DC:05:B5:25 > < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 > bdaddr 00:1B:DC:05:B5:25 >> HCI Event: Command Complete (0x0e) plen 10 > Link Key Request Negative Reply (0x01|0x000c) ncmd 1 > status 0x00 bdaddr 00:1B:DC:05:B5:25 >> HCI Event: PIN Code Request (0x16) plen 6 > bdaddr 00:1B:DC:05:B5:25 > > Signed-off-by: Jaganath Kanakkassery > --- > net/bluetooth/hci_event.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c > index 0a2b128..d0b1706 100644 > --- a/net/bluetooth/hci_event.c > +++ b/net/bluetooth/hci_event.c > @@ -2935,6 +2935,8 @@ static void hci_remote_ext_features_evt(struct hci_dev *hdev, > > if (ev->features[0] & LMP_HOST_SSP) > set_bit(HCI_CONN_SSP_ENABLED, &conn->flags); > + else > + clear_bit(HCI_CONN_SSP_ENABLED, &conn->flags); You need to add a comment here on why this is done like this. As explained above you are working around not allowed behavior. The clear should not be needed. Regards Marcel