Return-Path: Date: Wed, 10 Jul 2013 10:02:12 +0800 From: Adam Lee To: Gustavo Padovan Cc: linux-bluetooth@vger.kernel.org, Marcel Holtmann , Wen-chien Jesse Sung , AceLan Kao , Tedd Ho-Jeong An , Anthony Wong , Gustavo Padovan , Johan Hedberg , open list Subject: [PATCH v3] btusb: fix wrong use of PTR_ERR() Message-ID: <20130710020212.GA16015@adam-laptop> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20130709153213.GC1772@joana> List-ID: PTR_ERR() returns a signed long type value which is limited by IS_ERR(), it must be a negative number whose range is [-MAX_ERRNO, 0). The bug here returns negative numbers as error codes, then check it by "if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here leads to failure as below, even panic. [ 12.958920] Bluetooth: hci0 command 0xfc8e tx timeout [ 14.961765] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.964688] Bluetooth: hci0 command 0xfc8e tx timeout [ 20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 22.957358] Bluetooth: hci0 command 0xfc8e tx timeout [ 30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 32.951780] Bluetooth: hci0 command 0xfc8e tx timeout [ 40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 42.946219] Bluetooth: hci0 command 0xfc8e tx timeout [ 50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 52.940670] Bluetooth: hci0 command 0xfc8e tx timeout [ 60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 62.935092] Bluetooth: hci0 command 0xfc8e tx timeout [ 70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 72.929545] Bluetooth: hci0 command 0xfc8e tx timeout [ 80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 82.923969] Bluetooth: hci0 command 0xfc2f tx timeout [ 90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110) [ 92.918406] Bluetooth: hci0 command 0xfc11 tx timeout [ 100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110) [ 102.912858] Bluetooth: hci0 command 0xfc60 tx timeout [ 110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110) [ 112.907293] Bluetooth: hci0 command 0xfc11 tx timeout [ 120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) [ 120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000] Signed-off-by: Adam Lee --- drivers/bluetooth/btusb.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7a7e5f8..23df968 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1092,7 +1092,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev, if (IS_ERR(skb)) { BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", hdev->name, cmd->opcode, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } /* It ensures that the returned event matches the event data read from @@ -1144,7 +1144,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s sending initial HCI reset command failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1158,7 +1158,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s reading Intel fw version command failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } if (skb->len != sizeof(*ver)) { @@ -1216,7 +1216,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) BT_ERR("%s entering Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); release_firmware(fw); - return -PTR_ERR(skb); + return PTR_ERR(skb); } if (skb->data[0]) { @@ -1273,7 +1273,7 @@ static int btusb_setup_intel(struct hci_dev *hdev) if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1289,7 +1289,7 @@ exit_mfg_disable: if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); @@ -1307,7 +1307,7 @@ exit_mfg_deactivate: if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); - return -PTR_ERR(skb); + return PTR_ERR(skb); } kfree_skb(skb); -- 1.8.3.2