Return-Path: From: Dohyun Pyun To: linux-bluetooth@vger.kernel.org Cc: steve.jun@samsung.com, DoHyun Pyun , C S Bhargava Subject: [PATCH v2 6/8] Bluetooth: Add Start Synchronization Train Command Date: Wed, 2 Oct 2013 20:10:16 +0900 Message-Id: <1380712218-9269-7-git-send-email-dh79.pyun@samsung.com> In-Reply-To: <1380712218-9269-1-git-send-email-dh79.pyun@samsung.com> References: <1380712218-9269-1-git-send-email-dh79.pyun@samsung.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: From: DoHyun Pyun The Start_Synchronization_Train command controls the Synchronization Train functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 86 "7.1.51 Start Synchronization Train Command [New Section] ... If connectionless slave broadcast mode is not enabled, the Command Disallowed (0x0C) error code shall be returned. After receiving this command and returning a Command Status event, the Baseband starts attempting to send synchronization train packets containing information related to the enabled Connectionless Slave Broadcast packet timing. Note: The AFH_Channel_Map used in the synchronization train packets is configured by the Set_AFH_Channel_Classification command and the local channel classification in the BR/EDR Controller. The synchronization train packets will be sent using the parameters specified by the latest Write_Synchronization_Train_Parameters command. The Synchronization Train will continue until synchronization_trainTO slots (as specified in the last Write_Synchronization_Train command) have passed or until the Host disables the Connectionless Slave Broadcast logical transport." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava --- include/net/bluetooth/hci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 8176b27..5f30012 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -644,6 +644,8 @@ struct hci_rp_set_csb { __le16 interval; } __packed; +#define HCI_OP_START_SYNC_TRAIN 0x0443 + #define HCI_OP_SNIFF_MODE 0x0803 struct hci_cp_sniff_mode { __le16 handle; -- 1.8.1.2