Return-Path: From: Dohyun Pyun To: linux-bluetooth@vger.kernel.org Cc: steve.jun@samsung.com, DoHyun Pyun , C S Bhargava Subject: [PATCH 2/8] Bluetooth: Add Delete Reserved LT_ADDR Command Date: Wed, 2 Oct 2013 18:11:12 +0900 Message-Id: <1380705078-22154-3-git-send-email-dh79.pyun@samsung.com> In-Reply-To: <1380705078-22154-1-git-send-email-dh79.pyun@samsung.com> References: <1380705078-22154-1-git-send-email-dh79.pyun@samsung.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: From: DoHyun Pyun The Delete_Reserved_LT_ADDR command requests that the BR/EDR Controller cancel the reservation for a specific LT_ADDR reserved for the purposes of Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 92 "7.3.87 Delete Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is not reserved by the BR/EDR Controller, it shall return the Unknown Connection Identifier (0x02) error code. If connectionless slave broadcast mode is still active, then the Controller shall return the Command Disallowed (0x0C) error code." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava --- include/net/bluetooth/hci.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index dead0b0..28294ac 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -847,6 +847,15 @@ struct hci_rp_set_reserved_lt_addr { __u8 lt_addr; } __packed; +#define HCI_OP_DELETE_RESERVED_LT_ADDR 0x0c75 +struct hci_cp_delete_reserved_lt_addr { + __u8 lt_addr; +} __packed; +struct hci_rp_delete_reserved_lt_addr { + __u8 status; + __u8 lt_addr; +} __packed; + #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 #define HCI_OP_READ_LOCAL_VERSION 0x1001 -- 1.8.1.2