Return-Path: From: Andrei Emeltchenko To: linux-bluetooth@vger.kernel.org Subject: [PATCH 4/6] android/doc: Add socket-api.txt document Date: Tue, 3 Dec 2013 17:53:11 +0200 Message-Id: <1386085993-22055-4-git-send-email-Andrei.Emeltchenko.news@gmail.com> In-Reply-To: <1386085993-22055-1-git-send-email-Andrei.Emeltchenko.news@gmail.com> References: <1386085993-22055-1-git-send-email-Andrei.Emeltchenko.news@gmail.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: From: Andrei Emeltchenko Document describes how socket HAL is working. --- android/socket-api.txt | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 android/socket-api.txt diff --git a/android/socket-api.txt b/android/socket-api.txt new file mode 100644 index 0000000..9f622f9 --- /dev/null +++ b/android/socket-api.txt @@ -0,0 +1,61 @@ +Android Socket protocol for Bluetooth +===================================== + +Since Android switched from BlueZ (where sockets where nicely implemented) to +Bluedroid user space stack there is a need to emulate bluetooth sockets. + +Android Bluetooth Socket Hardware Abstraction Layer (HAL) bt_sock.h has +only 2 functions: + +static btsock_interface_t sock_if = { + sizeof(sock_if), + sock_listen, + sock_connect +}; + +with following parameters: + +sock_listen(btsock_type_t type, const char *service_name, + const uint8_t *uuid, int chan, int *sock_fd, int flags) +sock_connect(const bt_bdaddr_t *bdaddr, btsock_type_t type, + const uint8_t *uuid, int chan, int *sock_fd, int flags) + +socket type RFCOMM is only supported at the moment. uuid and channel used +to decide where to connect. + +sockfd is used to return socket fd to Android framework. It is used to inform +framework when remote device is connected. + +listen() +======== + +Listens on RFCOMM socket, socket channel is either found based on uuid or +channel parameter used directly. Returns sock_fd to Android framework. + +Through this sock_fd channel number as (int) needs to be written right after +listen() succeeds. + +When remote device is connected to this socket we shall send accept signal +through sock_fd + +connect() +========= + +Connects to remote device specified in bd_addr parameter. Socket channel is +found by SDP search of remote device by supplied uuid. Returns sock_fd to +Android framework. + +Through this sock_fd channel number as (int) needs to be written right after +connects() succeeds. + +When remote device is connected to this socket we shall send connect signal +through sock_fd + +The format of connect/accept signal is shown below: + +struct hal_sock_connect_signal { + short size; + uint8_t bdaddr[6]; + int channel; + int status; +} __attribute__((packed)); -- 1.8.3.2