Return-Path: From: Jakub Tyszkowski To: linux-bluetooth@vger.kernel.org Cc: Jakub Tyszkowski Subject: [PATCH] android/hal-gatt-api: Add Client Get Device Type Date: Thu, 27 Feb 2014 15:43:58 +0100 Message-Id: <1393512238-25491-1-git-send-email-jakub.tyszkowski@tieto.com> In-Reply-To: <1393404081-1401-22-git-send-email-jakub.tyszkowski@tieto.com> References: <1393404081-1401-22-git-send-email-jakub.tyszkowski@tieto.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: --- android/hal-ipc-api.txt | 10 ++++++++++ android/hal-msg.h | 5 +++++ 2 files changed, 15 insertions(+) diff --git a/android/hal-ipc-api.txt b/android/hal-ipc-api.txt index 2a40fc1..72c2a7a 100644 --- a/android/hal-ipc-api.txt +++ b/android/hal-ipc-api.txt @@ -1623,6 +1623,16 @@ Android HAL name: "gatt" (BT_PROFILE_GATT_ID) In case of an error, the error response will be returned. Opcode 0x14 - Get Device Type command/response + + Command parameters: Remote address (6 octets) + Response parameters: Device Type + + Valid Device Type: 0x01 = BREDR + 0x02 = BLE + 0x03 = DUAL + + In case of an error, the error response will be returned. + Opcode 0x15 - Set Advertising data command/response Opcode 0x16 - Test Command command/response diff --git a/android/hal-msg.h b/android/hal-msg.h index 7980c73..7f4266e 100644 --- a/android/hal-msg.h +++ b/android/hal-msg.h @@ -668,6 +668,11 @@ struct hal_cmd_gatt_client_read_remote_rssi { uint8_t bdaddr[6]; } __attribute__((packed)); +#define HAL_OP_GATT_CLIENT_GET_DEVICE_TYPE 0x14 +struct hal_cmd_gatt_client_get_device_type { + uint8_t bdaddr[6]; +} __attribute__((packed)); + /* Notifications and confirmations */ #define HAL_POWER_OFF 0x00 -- 1.9.0