Return-Path: Message-ID: <52FFD2DE.90709@gmail.com> Date: Sat, 15 Feb 2014 20:49:34 +0000 From: Andrea MIME-Version: 1.0 To: Szymon Janc CC: linux-bluetooth@vger.kernel.org Subject: Re: partial success with PS3 sixaxis References: <52FBE820.6050701@gmail.com> <2534491.XllyezJg3g@uw000953> <52FFD116.2080902@gmail.com> In-Reply-To: <52FFD116.2080902@gmail.com> Content-Type: text/plain; charset=UTF-8 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: On 15/02/14 20:41, Andrea wrote: > On 13/02/14 09:25, Szymon Janc wrote: >> Hi Andrea, >> >> >> I assume you are using bluetoothctl so do: >> agent on >> default-agent >> >> Then you should get authorization request in bluetoothctl when DS3 is connecting. >> > > Hi, > > I have tried on a different laptop (no more the raspberry pi, where I still have the issues I > reported in the other email), running Fedora 19. > > I compiled bluez 5.14 and run it. > It is more stable and /dev/input/js0 is usable. > > It is still not able to set the LEDs. This gets written in the output > > Feb 15 16:55:02 localhost.localdomain bluetoothd[24620]: sixaxis: compatible device connected: > PLAYSTATION(R)3 Contr > Feb 15 16:55:02 localhost.localdomain kernel: input: PLAYSTATION(R)3 Controller as > /devices/pci0000:00/0000:00:1d.1/ > Feb 15 16:55:02 localhost.localdomain kernel: sony 0005:054C:0268.000E: input,hidraw0: BLUETOOTH HID > v1.00 Joystick > Feb 15 16:55:02 localhost.localdomain bluetoothd[24620]: sixaxis: failed to set LEDS (0 bytes written) > > I have tried to log the traffic for bluez and sixad (where the LEDs work), to see you can find any > difference. > > http://pastebin.com/pExywtUk (this is the log from bluez where LEDs keep flashing) > http://pastebin.com/BgRUnamS (log from sixad where LEDs are set) > > Happy to provide more if it can be of any help. > > Andrea > and this is the log from bluez 5.14 running on raspberry pi where /dev/input/js0 disappears after a few seconds. http://pastebin.com/Rxsv3php Andrea