Return-Path: From: Andrzej Kaczmarek To: CC: Grzegorz Kolodziejczyk Subject: [PATCH 04/11] android/tester: Add create bond with SSP sucess test case Date: Sun, 2 Feb 2014 12:16:34 +0100 Message-ID: <1391339801-587-5-git-send-email-andrzej.kaczmarek@tieto.com> In-Reply-To: <1391339801-587-1-git-send-email-andrzej.kaczmarek@tieto.com> References: <1391339801-587-1-git-send-email-andrzej.kaczmarek@tieto.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-bluetooth-owner@vger.kernel.org List-ID: From: Grzegorz Kolodziejczyk This adds create bond with SSP succes test case. Confirm is set as SSP pairing mode. --- android/android-tester.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 77 insertions(+), 1 deletion(-) diff --git a/android/android-tester.c b/android/android-tester.c index d8f7d82..bfa23e9 100644 --- a/android/android-tester.c +++ b/android/android-tester.c @@ -1033,6 +1033,57 @@ static void pin_request_cb(bt_bdaddr_t *remote_bd_addr, cod); } +static void bond_create_ssp_request_cb(const bt_bdaddr_t *remote_bd_addr, + bt_ssp_variant_t pairing_variant, + bool accept) +{ + bdaddr_t remote_addr; + struct test_data *data = tester_get_data(); + struct mgmt_addr_info cp; + uint16_t opcode; + + android2bdaddr(remote_bd_addr, &remote_addr); + + if (pairing_variant == 0) { /* HAL_SSP_VARIANT_CONFIRM */ + if (accept) + opcode = MGMT_OP_USER_CONFIRM_REPLY; + else + opcode = MGMT_OP_USER_CONFIRM_NEG_REPLY; + + data->cb_count--; + + bacpy(&cp.bdaddr, &remote_addr); + cp.type = BDADDR_BREDR; + + mgmt_reply(data->mgmt, opcode, data->mgmt_index, sizeof(cp), + &cp, NULL, NULL, NULL); + } else + tester_test_failed(); +} + +static void bond_create_ssp_success_request_cb(bt_bdaddr_t *remote_bd_addr, + bt_bdname_t *bd_name, uint32_t cod, + bt_ssp_variant_t pairing_variant, + uint32_t pass_key) +{ + bool accept = true; + + bond_create_ssp_request_cb(remote_bd_addr, pairing_variant, accept); +} + +static void ssp_request_cb(bt_bdaddr_t *remote_bd_addr, bt_bdname_t *bd_name, + uint32_t cod, bt_ssp_variant_t pairing_variant, + uint32_t pass_key) +{ + struct test_data *data = tester_get_data(); + const struct generic_data *test = data->test_data; + + if (data->test_init_done && + test->expected_hal_cb.ssp_request_cb) + test->expected_hal_cb.ssp_request_cb(remote_bd_addr, bd_name, + cod, pairing_variant, pass_key); +} + static bt_bdaddr_t enable_done_bdaddr_val = { {0x00} }; static char enable_done_bdname_val[] = "BlueZ for Android"; static bt_uuid_t enable_done_uuids_val = { @@ -2071,6 +2122,14 @@ static const struct generic_data bt_bond_create_pin_fail_test = { .expected_adapter_status = MGMT_STATUS_AUTH_FAILED, }; +static const struct generic_data bt_bond_create_ssp_success_test = { + .expected_hal_cb.device_found_cb = bond_device_found_cb, + .expected_hal_cb.bond_state_changed_cb = bond_test_state_changed_cb, + .expected_hal_cb.ssp_request_cb = bond_create_ssp_success_request_cb, + .expected_cb_count = 4, + .expected_adapter_status = BT_STATUS_SUCCESS, +}; + static bt_callbacks_t bt_callbacks = { .size = sizeof(bt_callbacks), .adapter_state_changed_cb = adapter_state_changed_cb, @@ -2078,8 +2137,8 @@ static bt_callbacks_t bt_callbacks = { .remote_device_properties_cb = remote_device_properties_cb, .device_found_cb = device_found_cb, .discovery_state_changed_cb = discovery_state_changed_cb, - .ssp_request_cb = NULL, .pin_request_cb = pin_request_cb, + .ssp_request_cb = ssp_request_cb, .bond_state_changed_cb = bond_state_changed_cb, .acl_state_changed_cb = NULL, .thread_evt_cb = NULL, @@ -2854,6 +2913,18 @@ static void test_bond_create_pin_fail(const void *test_data) data->if_bluetooth->start_discovery(); } +static void test_bond_create_ssp_success(const void *test_data) +{ + struct test_data *data = tester_get_data(); + struct bthost *bthost = hciemu_client_get_host(data->hciemu); + + init_test_conditions(data); + + bthost_write_ssp_mode(bthost, 0x01); + + data->if_bluetooth->start_discovery(); +} + /* Test Socket HAL */ static void adapter_socket_state_changed_cb(bt_state_t state) @@ -4096,6 +4167,11 @@ int main(int argc, char *argv[]) setup_enabled_adapter, test_bond_create_pin_fail, teardown); + test_bredrle("Bluetooth Create Bond SSP - Success", + &bt_bond_create_ssp_success_test, + setup_enabled_adapter, + test_bond_create_ssp_success, teardown); + test_bredrle("Socket Init", NULL, setup_socket_interface, test_dummy, teardown); -- 1.8.5.2