Return-Path: From: Andre Guedes To: linux-bluetooth@vger.kernel.org Subject: [RFC v3] doc: Connection Parameters command and event Date: Mon, 7 Apr 2014 18:36:50 -0300 Message-Id: <1396906610-3853-1-git-send-email-andre.guedes@openbossa.org> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: --- doc/mgmt-api.txt | 81 +++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index cd5cd24..6a536d8 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -1006,7 +1006,8 @@ Unpair Device Command Return Parameters: Address (6 Octets) Address_Type (1 Octet) - Removes all keys associated with the remote device. + Removes all keys and connection parameters associated with the remote + device. Possible values for the Address_Type parameter: 0 BR/EDR @@ -1679,6 +1680,52 @@ Load Identity Resolving Keys Command Invalid Index +Load Connection Parameters Command +==================================== + + Command Code: 0x0031 + Controller Index: + Command Parameters: Params_Count (2 Octets) + Params1 { + Address (6 Octets) + Address_Type (1 Octet) + Min_Connection_Interval (2 Octets) + Max_Connection_Interval (2 Octes) + Connection_Latency (2 Octets) + Supervision_Timeout (2 Octets) + } + Params2 { } + ... + Return Parameters: + + This command is used to load connection parameters from several LE + devices into kernel. It is only supported on controllers with LE + support. + + The provided Address and Address_Type are the identity of a device. So + either its public address or static random address. Unresolvable random + addresses and resolvable random addresses are not valid and will be + rejected. + + Possible values for the Address_Type parameter: + 0 Reserved (not in use) + 1 LE Public + 2 LE Random + + The Min_Connection_Interval, Max_Connection_Interval, Connection_Latency + and Supervision_Timeout parameters should be configured as described in + Core 4.1 spec, Vol 2, 7.8.12. + + This command can be used when the controller is not powered. + + This command generates a Command Complete event on success or + a Command Status event on failure. + + Possible errors: Invalid Parameters + Invalid Index + Not Supported + + Command Complete Event ====================== @@ -2268,3 +2315,35 @@ New Signature Resolving Key Event The provided Address and Address_Type are the identity of a device. So either its public address or static random address. + + +New Connection Parameters Event +=============================== + + Event Code: 0x001a + Controller Index: + Event Parameters: Store_Hint (1 Octet) + Address (6 Octets) + Address_Type (1 Octet) + Min_Connection_Interval (2 Octets) + Max_Connection_Interval (2 Octes) + Connection_Latency (2 Octets) + Supervision_Timeout (2 Octets) + + This event indicates the new LE connection parameters set by GAP + Connection Parameter Update Procedure. + + The Store_Hint parameter indicates whether the host is expected + to store the connection parameters persistently or not. + + This event is sent only if the new parameters are different from the + parameters the user has configured (See Load Connection Parameters + Command) or if there is no parameters configured for that device. + + Possible values for the Address_Type parameter: + 0 Reserved (not in use) + 1 LE Public + 2 LE Random + + The Connection_Interval, Connection_Latency and Supervision_Timeout + parameters are encoded as described in Core 4.1 spec, Vol 2, 7.7.65.3. -- 1.9.1