Return-Path: From: Arman Uguray To: linux-bluetooth@vger.kernel.org Cc: Arman Uguray Subject: [PATCH 04/10] tools/btatt: Add "exchange-mtu" command. Date: Mon, 5 May 2014 21:45:57 -0700 Message-Id: <1399351563-25991-5-git-send-email-armansito@chromium.org> In-Reply-To: <1399351563-25991-1-git-send-email-armansito@chromium.org> References: <1399351563-25991-1-git-send-email-armansito@chromium.org> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Added command for "Exchange MTU" request/response. Also added code for initiating an L2CAP connection over the ATT channel. Tested using a CSR uEnergy 1000 board with the following results: $ btatt -d 00:02:5B:00:15:10 -v exchange-mtu 50 Going to set MTU to 16 bit value: 50 att: ATT command 0x02 att < 02 32 00 att > 03 17 00 Exchange MTU response: Server Rx MTU 23 --- tools/btatt.c | 191 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 190 insertions(+), 1 deletion(-) diff --git a/tools/btatt.c b/tools/btatt.c index 5287f42..a21625f 100644 --- a/tools/btatt.c +++ b/tools/btatt.c @@ -30,6 +30,7 @@ #include #include +#include #include "monitor/mainloop.h" #include "src/shared/att.h" @@ -38,11 +39,152 @@ static bool verbose = false; +static void handle_error(const void *param, uint16_t len) +{ + const struct bt_att_error_rsp_param *rp = param; + + if (len != sizeof(*rp)) { + fprintf(stderr, "Invalid error response length (%u)\n", len); + return; + } + + printf("Request failed:\n\topcode:\t%u\n\thandle:\t%u\n\terror:\t%u\n", + rp->request_opcode, rp->handle, rp->error_code); +} + +static void exchange_mtu_cb(uint8_t opcode, const void *param, + uint16_t len, void *user_data) +{ + const struct bt_att_exchange_mtu_rsp_param *rp; + + if (opcode == ATT_OP_ERROR_RESP) { + handle_error(param, len); + goto done; + } + + if (opcode != ATT_OP_EXCHANGE_MTU_RESP) { + fprintf(stderr, "Invalid response opcode (%u)\n", opcode); + goto done; + } + + rp = param; + + if (len != sizeof(*rp)) { + fprintf(stderr, "Invalid \"Exchange MTU\" response length " + "(%u)\n", len); + goto done; + } + + printf("Exchange MTU response: Server Rx MTU: %u\n", rp->server_rx_mtu); + +done: + mainloop_quit(); +} + +static void mtu_usage(void) +{ + printf("Usage: btatt exchange-mtu \n"); +} + +static struct option mtu_options[] = { + { "help", 0, 0, 'h'}, + {} +}; + +static void cmd_mtu(struct bt_att *att, int argc, char **argv) +{ + struct bt_att_exchange_mtu_req_param param; + uint16_t mtu; + int opt; + + while ((opt = getopt_long(argc, argv, "+h", mtu_options, + NULL)) != -1) { + switch (opt) { + case 'h': + default: + mtu_usage(); + exit(EXIT_SUCCESS); + } + } + + argc -= optind; + argv += optind; + optind = 0; + + if (argc < 1) { + mtu_usage(); + exit(EXIT_FAILURE); + } + + mtu = atoi(argv[0]); + + if (verbose) + printf("Going to set MTU to 16 bit value: %u\n", mtu); + + memset(¶m, 0, sizeof(param)); + param.client_rx_mtu = mtu; + if (bt_att_send(att, ATT_OP_EXCHANGE_MTU_REQ, ¶m, sizeof(param), + exchange_mtu_cb, NULL, NULL) == 0) { + fprintf(stderr, "Unable to send \"Exchange MTU\" request\n"); + exit(EXIT_FAILURE); + } +} + +static int l2cap_le_att_connect(bdaddr_t *src, bdaddr_t *dst, uint8_t dst_type) +{ + int sock; + struct sockaddr_l2 srcaddr, dstaddr; + char srcaddr_str[18], dstaddr_str[18]; + + if (verbose) { + ba2str(src, srcaddr_str); + ba2str(dst, dstaddr_str); + + printf("Opening L2CAP LE connection on ATT channel: " + "src: %s dest: %s\n", srcaddr_str, dstaddr_str); + } + + sock = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_L2CAP); + if (sock < 0) { + perror("Failed to create L2CAP socket"); + return -1; + } + + /* Set up source address */ + memset(&srcaddr, 0, sizeof(srcaddr)); + srcaddr.l2_family = AF_BLUETOOTH; + bacpy(&srcaddr.l2_bdaddr, src); + srcaddr.l2_cid = htobs(ATT_CID); + srcaddr.l2_bdaddr_type = BDADDR_LE_PUBLIC; + + if (bind(sock, (struct sockaddr *) &srcaddr, sizeof(srcaddr)) < 0) { + perror("Failed to bind L2CAP socket"); + close(sock); + return -1; + } + + /* Set up destination address */ + memset(&dstaddr, 0, sizeof(dstaddr)); + dstaddr.l2_family = AF_BLUETOOTH; + bacpy(&dstaddr.l2_bdaddr, dst); + dstaddr.l2_cid = htobs(ATT_CID); + dstaddr.l2_bdaddr_type = dst_type; + + if (connect(sock, (struct sockaddr *) &dstaddr, sizeof(dstaddr)) < 0) { + perror("Failed to connect"); + close(sock); + return -1; + } + + return sock; +} + static struct { char *cmd; void (*func)(struct bt_att *att, int argc, char **argv); char *doc; } command[] = { + { "exchange-mtu", cmd_mtu, "\"Exchange MTU\" request." }, { } }; @@ -79,6 +221,13 @@ static struct option main_options[] = { { 0, 0, 0, 0} }; +static void att_debug(const char *str, void *user_data) +{ + const char *prefix = user_data; + + printf("%s%s\n", prefix, str); +} + int main(int argc, char *argv[]) { int opt, i; @@ -87,6 +236,8 @@ int main(int argc, char *argv[]) uint8_t dest_type = BDADDR_LE_PUBLIC; bdaddr_t src_addr, dst_addr; int fd; + struct bt_att *att; + int exit_status; while ((opt = getopt_long(argc, argv, "+hvt:i:d:", main_options, NULL)) != -1) { @@ -147,5 +298,43 @@ int main(int argc, char *argv[]) return EXIT_FAILURE; } - return 0; + mainloop_init(); + + fd = l2cap_le_att_connect(&src_addr, &dst_addr, dest_type); + + if (fd < 0) + return EXIT_FAILURE; + + att = bt_att_new(fd); + + if (!att) { + fprintf(stderr, "Failed to create bt_att."); + close(fd); + return EXIT_FAILURE; + } + + if (verbose) + bt_att_set_debug(att, att_debug, "att: ", NULL); + + bt_att_set_close_on_unref(att, true); + + for (i = 0; command[i].cmd; i++) { + if (strcmp(command[i].cmd, argv[0]) == 0) + break; + } + + if (command[i].cmd == NULL) { + fprintf(stderr, "Unknown command: %s\n", argv[0]); + bt_att_unref(att); + return EXIT_FAILURE; + } + + command[i].func(att, argc, argv); + + exit_status = mainloop_run(); + + bt_att_cancel_all(att); + bt_att_unref(att); + + return exit_status; } -- 1.9.1.423.g4596e3a