Return-Path: From: Jukka Rissanen To: linux-bluetooth@vger.kernel.org Subject: [PATCH v4 3/5] Bluetooth: 6LoWPAN: Create a kernel module Date: Mon, 2 Jun 2014 13:08:22 +0300 Message-Id: <1401703704-22451-4-git-send-email-jukka.rissanen@linux.intel.com> In-Reply-To: <1401703704-22451-1-git-send-email-jukka.rissanen@linux.intel.com> References: <1401703704-22451-1-git-send-email-jukka.rissanen@linux.intel.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Instead of adding the 6LoWPAN functionality to Bluetooth module, we create a separate kernel module for it. Usage: In the slave side do this: $ modprobe bluetooth_6lowpan $ echo 62 > /sys/kernel/debug/bluetooth/6lowpan_psm $ hciconfig hci0 leadv In the master side do this: $ modprobe bluetooth_6lowpan $ echo 62 > /sys/kernel/debug/bluetooth/6lowpan_psm $ echo 'connect E0:06:E6:B7:2A:73 1' > \ /sys/kernel/debug/bluetooth/6lowpan_control The 6LoWPAN functionality can be controlled by psm value. If it is left to 0, then the module is disabled and all the 6LoWPAN connections are dropped if there were any. In the above example, the psm value is just an example and not a real value for 6LoWPAN service. The real psm value is yet to be defined in Bluetooth specification. The 6lowpan controlling interface is a temporary solution until the specifications are ready. Signed-off-by: Jukka Rissanen --- net/bluetooth/6lowpan.c | 11 ++++++++++- net/bluetooth/Kconfig | 6 +++--- net/bluetooth/Makefile | 4 +++- 3 files changed, 16 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c index 33be8c9..79e753b 100644 --- a/net/bluetooth/6lowpan.c +++ b/net/bluetooth/6lowpan.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -1237,7 +1238,7 @@ static int __init bt_6lowpan_init(void) return register_netdevice_notifier(&bt_6lowpan_dev_notifier); } -void bt_6lowpan_cleanup(void) +static void __exit bt_6lowpan_cleanup(void) { cleanup_6lowpan(); @@ -1245,3 +1246,11 @@ void bt_6lowpan_cleanup(void) unregister_netdevice_notifier(&bt_6lowpan_dev_notifier); } + +module_init(bt_6lowpan_init); +module_exit(bt_6lowpan_cleanup); + +MODULE_AUTHOR("Jukka Rissanen "); +MODULE_DESCRIPTION("Bluetooth 6LoWPAN"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig index 06ec144..f5afaa2 100644 --- a/net/bluetooth/Kconfig +++ b/net/bluetooth/Kconfig @@ -6,7 +6,6 @@ menuconfig BT tristate "Bluetooth subsystem support" depends on NET && !S390 depends on RFKILL || !RFKILL - select 6LOWPAN_IPHC if BT_6LOWPAN select CRC16 select CRYPTO select CRYPTO_BLKCIPHER @@ -41,10 +40,11 @@ menuconfig BT more information, see . config BT_6LOWPAN - bool "Bluetooth 6LoWPAN support" + tristate "Bluetooth 6LoWPAN support" depends on BT && IPV6 + select 6LOWPAN_IPHC if BT_6LOWPAN help - IPv6 compression over Bluetooth. + IPv6 compression over Bluetooth Low Energy. source "net/bluetooth/rfcomm/Kconfig" diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile index ca51246..886e9aa 100644 --- a/net/bluetooth/Makefile +++ b/net/bluetooth/Makefile @@ -7,10 +7,12 @@ obj-$(CONFIG_BT_RFCOMM) += rfcomm/ obj-$(CONFIG_BT_BNEP) += bnep/ obj-$(CONFIG_BT_CMTP) += cmtp/ obj-$(CONFIG_BT_HIDP) += hidp/ +obj-$(CONFIG_BT_6LOWPAN) += bluetooth_6lowpan.o + +bluetooth_6lowpan-y := 6lowpan.o bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \ hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o \ a2mp.o amp.o -bluetooth-$(CONFIG_BT_6LOWPAN) += 6lowpan.o subdir-ccflags-y += -D__CHECK_ENDIAN__ -- 1.8.3.1