Return-Path: Content-Type: text/plain; charset=windows-1252 Mime-Version: 1.0 (Mac OS X Mail 8.1 \(1993\)) Subject: Re: Adding Broadcom Support for BCM 20702AO of Fuijitsu Lifebook E751 with .driver_info = BTUSB_BCM_PATCHRAM }, From: Marcel Holtmann In-Reply-To: <547C4D47.6010606@gmx.de> Date: Mon, 1 Dec 2014 12:30:37 +0100 Cc: linux-bluetooth@vger.kernel.org Message-Id: <1FB03768-38C7-4FDA-980A-C63BA5EE2DC2@holtmann.org> References: <547C2F76.80000@gmx.de> <547C4D47.6010606@gmx.de> To: harv@gmx.de Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Harvey, >>> may I kindly ask to incorporate the bluetooth device of my >>> Laptop Fuijitsu Lifebook E751 to the list of devices supported >>> through loading firmware via .driver_info = BTUSB_BCM_PATCHRAM ? >>> >>> Output of usb-devices: >>> >>> T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= >>> 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: >>> Vendor=0489 ProdID=e031 Rev=01.12 S: Manufacturer=Broadcom Corp >>> S: Product=BCM20702A0 >> >> you need to send a patch adding the changes to the USB device >> table. The commit message should include the content of >> /sys/kernel/debug/usb/devices in the commit message and also >> instructions on how to get the firmware file needed for this >> hardware. > > I extracted the firmware file from the windows driver and converted it > via hex2hcd. Is this an acceptable way to go? we merged an earlier patch adding instructions on how to get the firmware. Have a look at that for reference. Regards Marcel