Return-Path: From: Stefan Schmidt To: 'Alexander Aring' Cc: 'Marcel Holtmann' , 'BlueZ development' , linux-wpan@vger.kernel.org, kernel@pengutronix.de, 'Jukka Rissanen' , 'Martin Townsend' References: <1420720298-1995-1-git-send-email-alex.aring@gmail.com> <058601d02b77$f3f47050$dbdd50f0$@samsung.com> <20150108200443.GB2046@omega> In-reply-to: <20150108200443.GB2046@omega> Subject: Re: [PATCHv4 bluetooth-next 0/3] 6lowpan: introduce nhc framework Date: Fri, 09 Jan 2015 13:05:22 +0000 Message-id: <05f001d02c0c$ede01620$c9a04260$@samsung.com> MIME-version: 1.0 Content-type: text/plain; format=flowed; charset=utf-8 List-ID: Hello. On 08/01/15 21:04, Alexander Aring wrote: > Hi, > > On Thu, Jan 08, 2015 at 07:18:57PM +0000, Stefan Schmidt wrote: > ... >>>> net/6lowpan/nhc.h | 146 ++++++++++++++++++++++++ >>>> net/6lowpan/nhc_rfc6282_dest.c | 27 +++++ >>>> net/6lowpan/nhc_rfc6282_frag.c | 26 +++++ >>>> net/6lowpan/nhc_rfc6282_hop.c | 26 +++++ >>>> net/6lowpan/nhc_rfc6282_ipv6.c | 26 +++++ >>>> net/6lowpan/nhc_rfc6282_mobil.c | 26 +++++ >>>> net/6lowpan/nhc_rfc6282_route.c | 26 +++++ >>>> net/6lowpan/nhc_rfc6282_udp.c | 156 ++++++++++++++++++++++++++ >>> >>> can we please remove the _rfc6282 from the filenames. RFCs get update and >>> thus change numbers. I do not want to carry RFC numbers in filenames >>> around. There is also almost no precedence in the kernel source code that >>> would justify doing this. >> >> They look indeed quite ugly in the filename. :) >> >> Moving them as a comment and starting point into the file should be >> enough. >> Maybe we can also rename nhc_mobil to nhc_mobility. The other >> abbreviations >> are clear in my opinion but for mobil I actually opened the rfc to look >> what >> you mean here. >> > > For the rfc6282 thing: > > Currently there exists two RFCs which describes an UDP compression. It's > rfc6282 (the well known 6LoWPAN IPHC compression RFC) and RFC7400 which > was pointed out by Martin Townsend [0]. November 2014, thats really new. > We need to clarify how we should deal with multiple definitions for a > compression format. On receiving side we should always support what we > can which is decided by the variable nhcid length. While on transmit... > we need still some configuration interface (my dreams are to decide the > compression methods per socket, don't know how possible that is). As a general rule we should try to accept, identify and uncompress as many formats for the incoming side. For the sending side this decision is very unlikely to be made by the application but instead it is made by the system configurator / platform. Thus in my eyes it makes more sense to have the configure options either via netlink or sysfs but not over the socket interface. > For the handling I thought that we have then two UDP nhc modules, both > can be loaded (at the moment _only_ one UDP nhc compressression should > implement the compress methods, both should implement uncompression > methods). > > I can rename it to nhc_udp.c for the standard compression methods > according to rfc6282, I am fine with that. But later there exists then > an another compression module with the naming "nhc_ghc_udp.c" or > something else. So we have "nhc_udp.ko" and "nhc_ghc_udp.ko". > Is that okay for everybody? It would be ok for me. nhc_udp is the earlier spec and thus has a shorter name while we need to distinguish for later specs and add the ghc for it. In a later mail you mentioned using _iphc_ and _ghc_ I would avoid that because GHC is just plugged into NHC and thus is also a under the IPHC umbrella of compressions. :) > Maybe I should also add some modinfo information, which containing the > nhc->name. Maybe. For what would it be used? Having a human readable description would make sense for the configure interface in some cases I would say. > For the nexthdr names: > > I will try to change it according to the NEXTHDR IPv6 defines [1], so also > the linux IPv6 guys knows what it is. That looks good to me. regards Stefan Schmidt