Return-Path: <cyrus@holtmann.org>
Date: Thu, 19 Feb 2015 18:02:16 +0200
From: Andrei Emeltchenko <andrei.emeltchenko.news@gmail.com>
To: Keith Conger <keith.conger@gmail.com>
Cc: Szymon Janc <szymon.janc@tieto.com>,
	Szymon Janc <szymon.janc@gmail.com>,
	BlueZ development <linux-bluetooth@vger.kernel.org>
Subject: Re: android-bluez with usb adapter
Message-ID: <20150219160213.GB32397@aemeltch-MOBL1>
References: <CALUN+EfYdOffOSejMQh3vnLGX1PZmBqMXL8UhvL-UHK_2kZqFA@mail.gmail.com>
 <2179587.DtNQVsuMNH@leonov>
 <CALUN+EcsmogUt4PU-sSM4peusX4gdnmAF=ou1ouj5y-QPSpq3Q@mail.gmail.com>
 <2375594.LoByC1Hkos@leonov>
 <CALUN+EfrG1o8VsTWjMxW7Y4NGe=-E3M_hz_618ToAG4QHwPZKA@mail.gmail.com>
 <CALUN+EfQkYuwfh5tqes0mKmGopshRhoWU823MNVE_EKwHsf_ZQ@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <CALUN+EfQkYuwfh5tqes0mKmGopshRhoWU823MNVE_EKwHsf_ZQ@mail.gmail.com>
Sender: linux-bluetooth-owner@vger.kernel.org
List-ID: <linux-bluetooth.vger.kernel.org>

Hi Keith,

On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>

This depends on your Android board configuration.

afaik you can still build it locally with "mm" and copy to target

adb sync should be enough

Best regards 
Andrei Emeltchenko 


> It seems almost like its not even trying to start bluetoothd.  I
> wrapped it with strace, and it didn't create a trace log.
> 
> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <keith.conger@gmail.com> wrote:
> > Ok I added the additional kernel modules.
> >
> > Here is a logcat from boot to turning on bluetooth in the UI.
> >
> > For some reason  audio.a2dp.default.so didn't get built, I'm looking into that.
> >
> > Thanks,
> > Keith
> >
> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <szymon.janc@tieto.com> wrote:
> >> Hi Keith,
> >>
> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
> >>> Actually I had tried through the UI first and got the above logcat
> >>> messages.  I then tried HAL test.
> >>>
> >>> Just for some additional background I'm running kernel 3.8.13 and
> >>> bluetooth modules from backports-3.18.1-1
> >>
> >> If haltest is working that means kernel is configured properly.
> >>
> >>> I have them at the bottom of "on boot" in the init.rc.  I have
> >>> attached my kernel config and init.rc.
> >>
> >> Could you attach full logcat starting from boot?
> >>
> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
> >> BT enable but is needed for music streaming over BT).
> >>
> >>>
> >>> I noticed in the mako example the following additional modules are
> >>> loaded, I'm guessing I should add them also?
> >>> insmod /system/lib/modules/rfcomm.ko
> >>> insmod /system/lib/modules/bnep.ko
> >>
> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
> >> (BT tethering).
> >>
> >>>
> >>> Thanks again for the help.
> >>> Keith
> >>>
> >>
> >> --
> >> BR
> >> Szymon Janc
> >
> >
> >
> > --
> > Keith Conger
> > keith DOT conger AT gmail DOT com
> > http://thecongers.org
> 
> 
> 
> -- 
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html