Return-Path: Message-ID: From: Ssagarr Patil To: Marcel Holtmann CC: Szymon Janc , "linux-bluetooth@vger.kernel.org" Subject: RE: bluez5 pairing devices Date: Thu, 19 Mar 2015 17:53:25 +0530 In-Reply-To: <440EB08C-2BD4-4373-B3DC-80361AA74722@holtmann.org> References: <46068BD2-CF33-4617-80DB-5AE5C1FCA364@holtmann.org> <,<12627750.IG3ACNRtuD@leonov> <>> ,<440EB08C-2BD4-4373-B3DC-80361AA74722@holtmann.org> Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Marcel, > Subject: Re: bluez5 pairing devices > From: marcel@holtmann.org > Date: Wed, 18 Mar 2015 09:28:55 -0700 > CC: szymon.janc@tieto.com; linux-bluetooth@vger.kernel.org > To: hugarsagar@outlook.com > > Hi Sagar, > >>> Just an note that recent backports dropped support for kernels older than 3.0. >>> So some older release might be needed for 2.6.37. >>> >> I have managed to backport it thanks. >> >> >> But bluetoothctl doesnt detect it, It says the following: >> >> # bluetoothctl >> [bluetooth]# power on >> No default controller available >> [bluetooth]# > > you need a running bluetoothd for bluetoothctl. > Isnt bluetoothd part of bluez5 stack ? as I am not able to see it. >> Here is output of hciconfig: >> >> $ hciconfig -a >> hci0: Type: BR/EDR Bus: UART >> BD Address: 34:B1:F7:E2:DE:CB ACL MTU: 1021:6 SCO MTU: 180:4 >> UP RUNNING PSCAN ISCAN >> RX bytes:12525 acl:56 sco:0 events:262 errors:0 >> TX bytes:2948 acl:52 sco:0 commands:108 errors:0 >> Features: 0xff 0xfe 0x2d 0xfe 0xdb 0xff 0x7b 0x87 >> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 >> Link policy: RSWITCH HOLD SNIFF >> Link mode: SLAVE ACCEPT >> Name: 'bt_hw' >> Class: 0x001f00 >> Service Classes: Unspecified >> Device Class: Invalid Device Class! >> HCI Version: 4.1 (0x7) Revision: 0x0 >> LMP Version: 4.1 (0x7) Subversion: 0xac7c >> Manufacturer: Texas Instruments Inc. (13) >> >> # > > Just our of curiosity, does this chip support BR/EDR Secure Connections? You might need to check with hciconfig hci0 features or run btmon to see the fully decoded list. > >From the logs seems it does support: Bluetooth monitor ver 5.29 = New Index: 34:B1:F7:E2:DE:CB (BR/EDR,UART,hci0)?????????????? [hci0] 0.041017 Regards, Sagar