Return-Path: From: Frederic Danis To: linux-bluetooth@vger.kernel.org Subject: [PATCH v7 6/6] Bluetooth: hci_uart: Add bcm_set_baudrate() Date: Thu, 28 May 2015 11:25:06 +0200 Message-Id: <1432805106-25719-7-git-send-email-frederic.danis@linux.intel.com> In-Reply-To: <1432805106-25719-1-git-send-email-frederic.danis@linux.intel.com> References: <1432805106-25719-1-git-send-email-frederic.danis@linux.intel.com> Content-Type: text/plain; charset="utf-8" Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis --- drivers/bluetooth/hci_bcm.c | 56 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 6c34135..0cbf9d4 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -31,11 +32,55 @@ #include "btbcm.h" #include "hci_uart.h" +#define BCM43XX_CLOCK_48 1 +#define BCM43XX_CLOCK_24 2 + struct bcm_data { struct sk_buff *rx_skb; struct sk_buff_head txq; }; +struct hci_cp_bcm_set_speed { + __le16 dummy; + __le32 speed; +} __packed; + +static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + struct hci_dev *hdev = hu->hdev; + struct sk_buff *skb; + struct hci_cp_bcm_set_speed param = { 0, cpu_to_le32(speed) }; + + if (speed > 3000000) { + u8 clock = BCM43XX_CLOCK_48; + + BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock); + + skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: failed to write update clock command (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + kfree_skb(skb); + } + + BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed); + + skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), ¶m, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: failed to write update baudrate command (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + kfree_skb(skb); + + return 0; +} + static int bcm_open(struct hci_uart *hu) { struct bcm_data *bcm; @@ -106,6 +151,14 @@ static int bcm_setup(struct hci_uart *hu) if (hu->proto->init_speed) hci_uart_set_baudrate(hu, hu->proto->init_speed); + if (hu->proto->oper_speed) { + err = bcm_set_baudrate(hu, hu->proto->oper_speed); + if (!err) + /* hci_uart_set_baudrate() has no return value as + tty_set_termios() return is always 0 */ + hci_uart_set_baudrate(hu, hu->proto->oper_speed); + } + finalize: release_firmware(fw); @@ -161,10 +214,13 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu) static const struct hci_uart_proto bcm_proto = { .id = HCI_UART_BCM, .name = "BCM", + .init_speed = 115200, + .oper_speed = 4000000, .open = bcm_open, .close = bcm_close, .flush = bcm_flush, .setup = bcm_setup, + .set_baudrate = bcm_set_baudrate, .recv = bcm_recv, .enqueue = bcm_enqueue, .dequeue = bcm_dequeue, -- 1.9.1