Return-Path: From: Gowtham Anandha Babu To: 'Luiz Augusto von Dentz' Cc: linux-bluetooth@vger.kernel.org, 'Bharat Bhusan Panda' , cpgs@samsung.com, 'Grzegorz Kolodziejczyk' References: <001a01d08bda$91503ab0$b3f0b010$@samsung.com> In-reply-to: Subject: RE: Query regarding bneptest tool Date: Mon, 11 May 2015 17:42:12 +0530 Message-id: <001b01d08be3$bcaa7870$35ff6950$@samsung.com> MIME-version: 1.0 Content-type: multipart/mixed; boundary="----=_NextPart_000_001C_01D08C11.D66377C0" Sender: linux-bluetooth-owner@vger.kernel.org List-ID: This is a multipart message in MIME format. ------=_NextPart_000_001C_01D08C11.D66377C0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Hi Luiz, > -----Original Message----- > From: linux-bluetooth-owner@vger.kernel.org [mailto:linux-bluetooth- > owner@vger.kernel.org] On Behalf Of Luiz Augusto von Dentz > Sent: Monday, May 11, 2015 5:06 PM > To: Gowtham Anandha Babu > Cc: linux-bluetooth@vger.kernel.org; Bharat Bhusan Panda; > cpgs@samsung.com; Grzegorz Kolodziejczyk > Subject: Re: Query regarding bneptest tool >=20 > Hi Gowtham, >=20 > On Mon, May 11, 2015 at 2:06 PM, Gowtham Anandha Babu > wrote: > > Hi All, > > > > I am testing BlueZ bnep test tool (tools/bneptest) using PTS 6.1.0. > > The BNEP client test cases are not passing in BT_IO_SEC_MEDIUM > > security level. > > My PTS PICS and PIXIT are same as android/pixit-bnep.txt, > > android/pics-bnep.txt. > > Whereas when the security level is BT_IO_SEC_LOW, it is passing. > > If it is a valid fix, then I will send a patch for the same. > > This is tested in Linux, not sure about android. >=20 > It might be related to pairing then, do you have any agent registered = in the > system? Check the HCI logs with btmon, it should tell us what is = happening. >=20 I have attached both logs. Below is the procedure I followed. -------------------------------------------------------------------- PTS output: Test case : TC_CTRL_BV_02_C started - Received passkey: 564246, from: gowtham-ab-0 - User canceled the current operation MMI. - MMI CM_EXIT - got an OTHERWISE - MTC: Test case ended -Final Verdict: INCONC TC_CTRL_BV_02_C finished -------------------------------------------------------------------- BlueZ output: /latest_bluez/bluez/test$ sudo ./bneptest -c 00:1B:DC:07:33:4E -b pan0 = -n bnep0 bnep_client_connect connecting 00:1B:DC:07:33:4E cannot initiate bnep connection connected_client_cb ^Cgot sig =3D 2, cleaning up... cleanup successful - exit -------------------------------------------------------------------- /latest_bluez/bluez/test$ ./simple-agent=20 Agent registered Release gowtham.ab@gowtham-ab:~/latest_bluez/bluez/test$ ./simple-agent=20 Agent registered RequestConfirmation (/org/bluez/hci0/dev_00_1B_DC_07_33_4E, 564246) Confirm passkey (yes/no): yes Release -------------------------------------------------------------------- After confirming the passkey, it becomes Authentication Failure and = Remote User Terminated Connection as captured in btmon, hcidump logs. What might be the problem? > > > > diff --git a/tools/bneptest.c b/tools/bneptest.c index > > 98ee9b1..fccecd2 100644 > > --- a/tools/bneptest.c > > +++ b/tools/bneptest.c > > @@ -477,7 +477,7 @@ static int bnep_client_connect(void) > > BT_IO_OPT_SOURCE_BDADDR, = &src_addr, > > BT_IO_OPT_DEST_BDADDR, = &dst_addr, > > BT_IO_OPT_PSM, BNEP_PSM, > > - BT_IO_OPT_SEC_LEVEL, > > BT_IO_SEC_MEDIUM, > > + BT_IO_OPT_SEC_LEVEL, > > + BT_IO_SEC_LOW, > > BT_IO_OPT_OMTU, BNEP_MTU, > > BT_IO_OPT_IMTU, BNEP_MTU, > > BT_IO_OPT_INVALID); > > > > > > Regards, > > Gowtham Anandha Babu > > >=20 >=20 >=20 > -- > Luiz Augusto von Dentz > -- Regards, Gowtham Anandha Babu > To unsubscribe from this list: send the line "unsubscribe = linux-bluetooth" in > the body of a message to majordomo@vger.kernel.org More majordomo > info at http://vger.kernel.org/majordomo-info.html ------=_NextPart_000_001C_01D08C11.D66377C0 Content-Type: text/plain; name="btmon.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="btmon.txt" Bluetooth monitor ver 5.30=0A= =3D New Index: 00:1A:7D:DA:71:13 (BR/EDR,USB,hci0) [hci0] = 0.818376=0A= @ Device Removed: 00:1B:DC:07:33:4E (0)=0A= @ Device Removed: 00:1A:7D:DA:71:13 (0)=0A= @ Device Removed: 00:02:CA:C0:54:EF (0)=0A= @ Device Removed: CC:C3:EA:FF:E2:5F (0)=0A= < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] = 7.860053=0A= FEC: Not required (0x00)=0A= Name (complete): gowtham-ab-0=0A= TX power: 4 dBm=0A= Device ID: USB Implementer's Forum assigned (0x0002)=0A= Vendor: Linux Foundation (0x1d6b)=0A= Product: 0x0246=0A= Version: 5.1.14 (0x051e)=0A= 16-bit Service UUIDs (complete): 2 entries=0A= Generic Access Profile (0x1800)=0A= Generic Attribute Profile (0x1801)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 7.863002=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] = 8.165743=0A= FEC: Not required (0x00)=0A= Name (complete): gowtham-ab-0=0A= TX power: 4 dBm=0A= Device ID: USB Implementer's Forum assigned (0x0002)=0A= Vendor: Linux Foundation (0x1d6b)=0A= Product: 0x0246=0A= Version: 5.1.14 (0x051e)=0A= 16-bit Service UUIDs (complete): 3 entries=0A= Generic Access Profile (0x1800)=0A= Generic Attribute Profile (0x1801)=0A= A/V Remote Control (0x110e)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.168976=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] = 8.180847=0A= FEC: Not required (0x00)=0A= Name (complete): gowtham-ab-0=0A= TX power: 4 dBm=0A= Device ID: USB Implementer's Forum assigned (0x0002)=0A= Vendor: Linux Foundation (0x1d6b)=0A= Product: 0x0246=0A= Version: 5.1.14 (0x051e)=0A= 16-bit Service UUIDs (complete): 4 entries=0A= Generic Access Profile (0x1800)=0A= Generic Attribute Profile (0x1801)=0A= A/V Remote Control (0x110e)=0A= A/V Remote Control Target (0x110c)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.183971=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= Status: Success (0x00)=0A= @ Device Unblocked: 00:00:00:00:00:00 (0)=0A= @ Device Added: CC:C3:EA:FF:E2:5F (0) 1=0A= @ Device Added: 00:02:CA:C0:54:EF (0) 1=0A= @ Device Added: 00:1A:7D:DA:71:13 (0) 1=0A= @ Device Added: 00:1B:DC:07:33:4E (0) 1=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] = 8.203096=0A= Scan enable: Page Scan (0x02)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.203973=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] = 8.204000=0A= Length: 3=0A= TX power: 8 dBm=0A= @ New Settings: 0x0ad1=0A= powered bondable ssp br/edr le secure-conn =0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.218973=0A= LE Set Advertising Data (0x08|0x0008) ncmd 1=0A= Status: Success (0x00)=0A= @ New Settings: 0x0ad3=0A= powered connectable bondable ssp br/edr le secure-conn =0A= < HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4 [hci0] = 8.247932=0A= Number of IAC: 1=0A= Access code: 0x9e8b33 (General Inquiry)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.248995=0A= Write Current IAC LAP (0x03|0x003a) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] = 8.249021=0A= Scan enable: Inquiry Scan + Page Scan (0x03)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.250973=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] = 8.251005=0A= Length: 6=0A= Flags: 0x02=0A= LE General Discoverable Mode=0A= TX power: 8 dBm=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 8.255980=0A= LE Set Advertising Data (0x08|0x0008) ncmd 1=0A= Status: Success (0x00)=0A= @ New Settings: 0x0adb=0A= powered connectable discoverable bondable ssp br/edr le = secure-conn =0A= < HCI Command: Create Connection (0x01|0x0005) plen 13 [hci0] = 124.720498=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Packet type: 0xcc18=0A= DM1 may be used=0A= DH1 may be used=0A= DM3 may be used=0A= DH3 may be used=0A= DM5 may be used=0A= DH5 may be used=0A= Page scan repetition mode: R2 (0x02)=0A= Page scan mode: Mandatory (0x00)=0A= Clock offset: 0x0000=0A= Role switch: Allow slave (0x01)=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 124.734081=0A= Create Connection (0x01|0x0005) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Connect Complete (0x03) plen 11 [hci0] = 127.725098=0A= Status: Success (0x00)=0A= Handle: 70=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Link type: ACL (0x01)=0A= Encryption: Disabled (0x00)=0A= < HCI Command: Read Remote Supported... (0x01|0x001b) plen 2 [hci0] = 127.725227=0A= Handle: 70=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 127.730074=0A= Read Remote Supported Features (0x01|0x001b) ncmd 0=0A= Status: Success (0x00)=0A= > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 [hci0] = 127.735080=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Page scan repetition mode: R1 (0x01)=0A= > HCI Event: Max Slots Change (0x1b) plen 3 [hci0] = 127.738110=0A= Handle: 70=0A= Max slots: 5=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 127.751101=0A= NOP (0x00|0x0000) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Read Remote Supported Features (0x0b) plen 11 [hci0] = 127.758124=0A= Status: Success (0x00)=0A= Handle: 70=0A= Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87=0A= 3 slot packets=0A= 5 slot packets=0A= Encryption=0A= Slot offset=0A= Timing accuracy=0A= Role switch=0A= Hold mode=0A= Sniff mode=0A= Park state=0A= Power control requests=0A= Channel quality driven data rate (CQDDR)=0A= SCO link=0A= HV2 packets=0A= HV3 packets=0A= u-law log synchronous data=0A= A-law log synchronous data=0A= CVSD synchronous data=0A= Paging parameter negotiation=0A= Power control=0A= Transparent synchronous data=0A= Broadcast Encryption=0A= Enhanced Data Rate ACL 2 Mbps mode=0A= Enhanced Data Rate ACL 3 Mbps mode=0A= Enhanced inquiry scan=0A= Interlaced inquiry scan=0A= Interlaced page scan=0A= RSSI with inquiry results=0A= AFH capable slave=0A= AFH classification slave=0A= LE Supported (Controller)=0A= 3-slot Enhanced Data Rate ACL packets=0A= 5-slot Enhanced Data Rate ACL packets=0A= Sniff subrating=0A= Pause encryption=0A= AFH capable master=0A= AFH classification master=0A= Extended Inquiry Response=0A= Simultaneous LE and BR/EDR (Controller)=0A= Secure Simple Pairing=0A= Encapsulated PDU=0A= Non-flushable Packet Boundary Flag=0A= Link Supervision Timeout Changed Event=0A= Inquiry TX Power Level=0A= Enhanced Power Control=0A= Extended features=0A= < HCI Command: Read Remote Extended F.. (0x01|0x001c) plen 3 [hci0] = 127.758157=0A= Handle: 70=0A= Page: 1=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 127.763096=0A= Read Remote Extended Features (0x01|0x001c) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Read Remote Extended Features (0x23) plen 13 [hci0] = 127.770079=0A= Status: Success (0x00)=0A= Handle: 70=0A= Page: 1/1=0A= Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00=0A= Secure Simple Pairing (Host Support)=0A= < HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] = 127.770117=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Page scan repetition mode: R2 (0x02)=0A= Page scan mode: Mandatory (0x00)=0A= Clock offset: 0x0000=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 127.776084=0A= Remote Name Request (0x01|0x0019) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] = 127.806077=0A= Status: Success (0x00)=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Name: PTS-BNEP-GOWTHAM-AB=0A= < HCI Command: Authentication Requested (0x01|0x0011) plen 2 [hci0] = 127.806149=0A= Handle: 70=0A= @ Device Connected: 00:1B:DC:07:33:4E (0) flags 0x0000=0A= 14 09 50 54 53 2d 42 4e 45 50 2d 47 4f 57 54 48 ..PTS-BNEP-GOWTH=0A= 41 4d 2d 41 42 AM-AB =0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 127.808035=0A= Authentication Requested (0x01|0x0011) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Link Key Request (0x17) plen 6 [hci0] = 127.809039=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= < HCI Command: Link Key Request Negat.. (0x01|0x000c) plen 6 [hci0] = 127.809070=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= > HCI Event: Command Complete (0x0e) plen 10 [hci0] = 127.815041=0A= Link Key Request Negative Reply (0x01|0x000c) ncmd 1=0A= Status: Success (0x00)=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= > HCI Event: IO Capability Request (0x31) plen 6 [hci0] = 127.816039=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= < HCI Command: IO Capability Request... (0x01|0x002b) plen 9 [hci0] = 127.816068=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= IO capability: DisplayYesNo (0x01)=0A= OOB data: Authentication data not present (0x00)=0A= Authentication: General Bonding - MITM required (0x05)=0A= > HCI Event: Command Complete (0x0e) plen 10 [hci0] = 127.820040=0A= IO Capability Request Reply (0x01|0x002b) ncmd 1=0A= Status: Success (0x00)=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= > HCI Event: IO Capability Response (0x32) plen 9 [hci0] = 127.842137=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= IO capability: DisplayYesNo (0x01)=0A= OOB data: Authentication data not present (0x00)=0A= Authentication: General Bonding - MITM not required (0x04)=0A= > HCI Event: User Confirmation Request (0x33) plen 10 [hci0] = 128.242120=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= Passkey: 564246=0A= @ User Confirmation Request: 00:1B:DC:07:33:4E (0) hint 0 value 564246=0A= > HCI Event: Simple Pairing Complete (0x36) plen 7 [hci0] = 158.243129=0A= Status: Authentication Failure (0x05)=0A= Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)=0A= > HCI Event: Auth Complete (0x06) plen 3 [hci0] = 158.244139=0A= Status: Authentication Failure (0x05)=0A= Handle: 70=0A= @ Authentication Failed: 00:1B:DC:07:33:4E (0) status 0x05=0A= < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 [hci0] = 158.270357=0A= Handle: 70=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 158.272106=0A= Read Clock Offset (0x01|0x001f) ncmd 1=0A= Status: Success (0x00)=0A= < HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] = 158.272142=0A= Handle: 70=0A= Reason: Remote User Terminated Connection (0x13)=0A= > HCI Event: Read Clock Offset Complete (0x1c) plen 5 [hci0] = 158.277091=0A= Status: Success (0x00)=0A= Handle: 70=0A= Clock offset: 0x1f88=0A= > HCI Event: Command Status (0x0f) plen 4 [hci0] = 158.278089=0A= Disconnect (0x01|0x0006) ncmd 1=0A= Status: Success (0x00)=0A= > HCI Event: Disconnect Complete (0x05) plen 4 [hci0] = 158.356112=0A= Status: Success (0x00)=0A= Handle: 70=0A= Reason: Connection Terminated By Local Host (0x16)=0A= @ Device Disconnected: 00:1B:DC:07:33:4E (0) reason 2=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] = 174.927620=0A= Scan enable: No Scans (0x00)=0A= > HCI Event: Command Complete (0x0e) plen 4 [hci0] = 174.929118=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= Status: Success (0x00)=0A= @ Class of Device Changed: 0x000000=0A= @ New Settings: 0x0ada=0A= connectable discoverable bondable ssp br/edr le secure-conn =0A= ------=_NextPart_000_001C_01D08C11.D66377C0 Content-Type: text/plain; name="hcidump.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="hcidump.txt" HCI sniffer - Bluetooth packet analyzer ver 5.30=0A= device: hci0 snap_len: 1500 filter: 0xffffffffffffffff=0A= < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241=0A= fec 0x00=0A= Complete local name: 'gowtham-ab-0'=0A= TX power level: 4=0A= Unknown type 0x10 with 8 bytes data=0A= Complete service classes: 0x1800 0x1801=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= status 0x00=0A= < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241=0A= fec 0x00=0A= Complete local name: 'gowtham-ab-0'=0A= TX power level: 4=0A= Unknown type 0x10 with 8 bytes data=0A= Complete service classes: 0x1800 0x1801 0x110e=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= status 0x00=0A= < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241=0A= fec 0x00=0A= Complete local name: 'gowtham-ab-0'=0A= TX power level: 4=0A= Unknown type 0x10 with 8 bytes data=0A= Complete service classes: 0x1800 0x1801 0x110e 0x110c=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Extended Inquiry Response (0x03|0x0052) ncmd 1=0A= status 0x00=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1=0A= enable 2=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= status 0x00=0A= < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= LE Set Advertising Data (0x08|0x0008) ncmd 1=0A= status 0x00=0A= < HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4=0A= IAC 0x9e8b33 (General Inquiry Access Code)=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Current IAC LAP (0x03|0x003a) ncmd 1=0A= status 0x00=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1=0A= enable 3=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= status 0x00=0A= < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= LE Set Advertising Data (0x08|0x0008) ncmd 1=0A= status 0x00=0A= < HCI Command: Create Connection (0x01|0x0005) plen 13=0A= bdaddr 00:1B:DC:07:33:4E ptype 0xcc18 rswitch 0x01 clkoffset 0x0000=0A= Packet type: DM1 DM3 DM5 DH1 DH3 DH5 =0A= > HCI Event: Command Status (0x0f) plen 4=0A= Create Connection (0x01|0x0005) status 0x00 ncmd 1=0A= > HCI Event: Connect Complete (0x03) plen 11=0A= status 0x00 handle 70 bdaddr 00:1B:DC:07:33:4E type ACL encrypt 0x00=0A= < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2=0A= handle 70=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0=0A= > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7=0A= bdaddr 00:1B:DC:07:33:4E mode 1=0A= > HCI Event: Max Slots Change (0x1b) plen 3=0A= handle 70 slots 5=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Unknown (0x00|0x0000) status 0x00 ncmd 1=0A= > HCI Event: Read Remote Supported Features (0x0b) plen 11=0A= status 0x00 handle 70=0A= Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87=0A= < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3=0A= handle 70 page 1=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1=0A= > HCI Event: Read Remote Extended Features (0x23) plen 13=0A= status 0x00 handle 70 page 1 max 1=0A= Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00=0A= < HCI Command: Remote Name Request (0x01|0x0019) plen 10=0A= bdaddr 00:1B:DC:07:33:4E mode 2 clkoffset 0x0000=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Remote Name Request (0x01|0x0019) status 0x00 ncmd 1=0A= > HCI Event: Remote Name Req Complete (0x07) plen 255=0A= status 0x00 bdaddr 00:1B:DC:07:33:4E name 'PTS-BNEP-GOWTHAM-AB'=0A= < HCI Command: Authentication Requested (0x01|0x0011) plen 2=0A= handle 70=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Authentication Requested (0x01|0x0011) status 0x00 ncmd 1=0A= > HCI Event: Link Key Request (0x17) plen 6=0A= bdaddr 00:1B:DC:07:33:4E=0A= < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6=0A= bdaddr 00:1B:DC:07:33:4E=0A= > HCI Event: Command Complete (0x0e) plen 10=0A= Link Key Request Negative Reply (0x01|0x000c) ncmd 1=0A= status 0x00 bdaddr 00:1B:DC:07:33:4E=0A= > HCI Event: IO Capability Request (0x31) plen 6=0A= bdaddr 00:1B:DC:07:33:4E=0A= < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9=0A= bdaddr 00:1B:DC:07:33:4E capability 0x01 oob 0x00 auth 0x05=0A= Capability: DisplayYesNo (OOB data not present)=0A= Authentication: General Bonding (MITM Protection)=0A= > HCI Event: Command Complete (0x0e) plen 10=0A= IO Capability Request Reply (0x01|0x002b) ncmd 1=0A= status 0x00 bdaddr 00:1B:DC:07:33:4E=0A= > HCI Event: IO Capability Response (0x32) plen 9=0A= bdaddr 00:1B:DC:07:33:4E capability 0x01 oob 0x00 auth 0x04=0A= Capability: DisplayYesNo (OOB data not present)=0A= Authentication: General Bonding (No MITM Protection)=0A= > HCI Event: User Confirmation Request (0x33) plen 10=0A= bdaddr 00:1B:DC:07:33:4E passkey 564246=0A= > HCI Event: Simple Pairing Complete (0x36) plen 7=0A= status 0x05 bdaddr 00:1B:DC:07:33:4E=0A= Error: Authentication Failure=0A= > HCI Event: Auth Complete (0x06) plen 3=0A= status 0x05 handle 70=0A= Error: Authentication Failure=0A= < HCI Command: Read Clock Offset (0x01|0x001f) plen 2=0A= handle 70=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1=0A= < HCI Command: Disconnect (0x01|0x0006) plen 3=0A= handle 70 reason 0x13=0A= Reason: Remote User Terminated Connection=0A= > HCI Event: Read Clock Offset Complete (0x1c) plen 5=0A= status 0x00 handle 70 clkoffset 0x1f88=0A= > HCI Event: Command Status (0x0f) plen 4=0A= Disconnect (0x01|0x0006) status 0x00 ncmd 1=0A= > HCI Event: Disconn Complete (0x05) plen 4=0A= status 0x00 handle 70 reason 0x16=0A= Reason: Connection Terminated by Local Host=0A= < HCI Command: Write Scan Enable (0x03|0x001a) plen 1=0A= enable 0=0A= > HCI Event: Command Complete (0x0e) plen 4=0A= Write Scan Enable (0x03|0x001a) ncmd 1=0A= status 0x00=0A= ------=_NextPart_000_001C_01D08C11.D66377C0--