Return-Path: From: Ilya Faenson To: Marcel Holtmann CC: , Arend van Spriel , Ilya Faenson Subject: [PATCH v2 3/5] Broadcom Bluetooth UART Platform Driver Date: Wed, 10 Jun 2015 16:05:18 -0400 Message-ID: <1433966720-17482-4-git-send-email-ifaenson@broadcom.com> In-Reply-To: <1433966720-17482-1-git-send-email-ifaenson@broadcom.com> References: <1433966720-17482-1-git-send-email-ifaenson@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain List-ID: Introduce the device tree enumerated Broadcom Bluetooth UART driver. Signed-off-by: Ilya Faenson --- drivers/bluetooth/Kconfig | 9 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btbcm_uart.c | 673 +++++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/btbcm_uart.h | 89 ++++++ 4 files changed, 772 insertions(+) create mode 100644 drivers/bluetooth/btbcm_uart.c create mode 100644 drivers/bluetooth/btbcm_uart.h diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 2e77707..5eee3ed 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -143,6 +143,7 @@ config BT_HCIUART_BCM bool "Broadcom protocol support" depends on BT_HCIUART select BT_HCIUART_H4 + select BT_UART_BCM select BT_BCM help The Broadcom protocol support enables Bluetooth HCI over serial @@ -150,6 +151,14 @@ config BT_HCIUART_BCM Say Y here to compile support for Broadcom protocol. +config BT_UART_BCM + tristate "Broadcom BT UART driver" + depends on BT_HCIUART_H4 && TTY + help + This driver supports the HCI_UART_BT protocol. + + It manages Bluetooth UART device properties and GPIOs. + config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index f40e194..e908a88 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o obj-$(CONFIG_BT_WILINK) += btwilink.o obj-$(CONFIG_BT_BCM) += btbcm.o +obj-$(CONFIG_BT_UART_BCM) += btbcm_uart.o obj-$(CONFIG_BT_RTL) += btrtl.o btmrvl-y := btmrvl_main.o diff --git a/drivers/bluetooth/btbcm_uart.c b/drivers/bluetooth/btbcm_uart.c new file mode 100644 index 0000000..ccd02a9 --- /dev/null +++ b/drivers/bluetooth/btbcm_uart.c @@ -0,0 +1,673 @@ +/* + * Bluetooth BCM UART Driver + * + * Copyright (c) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include "btbcm_uart.h" + +static int idle_timeout = 5; +module_param(idle_timeout, int, 0); +MODULE_PARM_DESC(idle_timeout, "Bluetooth idle timeout in seconds"); + +/* Device context */ +struct bcm_device { + struct list_head list; + + struct platform_device *pdev; + struct gpio_desc *bt_wake_gpio; + struct gpio_desc *dev_wake_gpio; + struct gpio_desc *reg_on_gpio; + int bt_wake_irq; + int dev_wake_active_low; + int reg_on_active_low; + int bt_wake_active_low; + bool configure_sleep; + u32 manual_fc; + u32 oper_speed; + bool configure_audio; + u32 pcm_clockmode; + u32 pcm_fillmethod; + u32 pcm_fillnum; + u32 pcm_fillvalue; + u32 pcm_incallbitclock; + u32 pcm_lsbfirst; + u32 pcm_rightjustify; + u32 pcm_routing; + u32 pcm_shortframesync; + u32 pcm_syncmode; + + char tty_name[64]; + + struct btbcm_uart_callbacks protocol_callbacks; + struct work_struct wakeup_work; +}; + +/* List of BCM BT UART devices */ +static DEFINE_SPINLOCK(device_list_lock); +static LIST_HEAD(device_list); + +/* + * Calling the BCM protocol at lower execution priority + */ +static void bcm_bt_wakeup_task(struct work_struct *ws) +{ + int gpio_value; + struct bcm_device *p_bcm_device = + container_of(ws, struct bcm_device, wakeup_work); + + if (!p_bcm_device) { + BT_DBG("%s - failing, no device", __func__); + return; + } + + /* Make sure the device is resumed */ + gpio_value = !p_bcm_device->dev_wake_active_low; + if (p_bcm_device->dev_wake_gpio) { + gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value); + BT_DBG("%s - resume %d written, delaying 15 ms", + __func__, gpio_value); + mdelay(15); + } + + /* Let the protocol know it's time to wake up */ + if (p_bcm_device->protocol_callbacks.p_wakeup) + p_bcm_device->protocol_callbacks.p_wakeup( + p_bcm_device->protocol_callbacks.context); +} + +/* + * Interrupt routine for the wake from the device + */ +static irqreturn_t bcm_bt_uart_isr(int irq, void *context) +{ + unsigned int bt_wake; + struct bcm_device *p = (struct bcm_device *)context; + + bt_wake = gpiod_get_value(p->bt_wake_gpio); + BT_DBG("%s with bt_wake of %d (active_low %d), req bh", + __func__, bt_wake, p->bt_wake_active_low); + + /* Defer the actual processing to the platform work queue */ + schedule_work(&p->wakeup_work); + return IRQ_HANDLED; +} + +/* + * Device instance startup + */ +static int bcm_bt_uart_probe(struct platform_device *pdev) +{ + int ret = 0; + struct device_node *np = pdev->dev.of_node; + const char *tty_name; + struct bcm_device *p_bcm_device = NULL; + + p_bcm_device = devm_kzalloc(&pdev->dev, sizeof(*p_bcm_device), + GFP_KERNEL); + if (!p_bcm_device) { + BT_DBG("%s - failing due to no memory", __func__); + return -ENOMEM; + } + p_bcm_device->pdev = pdev; + BT_DBG("%s %p context", __func__, p_bcm_device); + + /* Get dev wake GPIO */ + p_bcm_device->dev_wake_gpio = gpiod_get(&pdev->dev, "bt-wake"); + BT_DBG("%s - gpiod_get for bt-wake returned %p", + __func__, p_bcm_device->dev_wake_gpio); + if (IS_ERR(p_bcm_device->dev_wake_gpio)) { + ret = PTR_ERR(p_bcm_device->dev_wake_gpio); + if (ret != -ENOENT) { + dev_err(&pdev->dev, + "%s - dev_wake GPIO: %d\n", __func__, ret); + } + p_bcm_device->dev_wake_gpio = NULL; + } else { + int gpio_value; + + p_bcm_device->dev_wake_active_low = gpiod_is_active_low + (p_bcm_device->dev_wake_gpio); + BT_DBG("%s - dev_wake a-low is %d (cans %d)", + __func__, p_bcm_device->dev_wake_active_low, + gpiod_cansleep(p_bcm_device->dev_wake_gpio)); + + /* configure dev_wake as output with init resumed state */ + gpio_value = !p_bcm_device->dev_wake_active_low; + ret = gpiod_direction_output(p_bcm_device->dev_wake_gpio, + gpio_value); + if (ret < 0) { + dev_err(&pdev->dev, + "%s s dev_wake GPIO: %d\n", __func__, ret); + gpiod_put(p_bcm_device->dev_wake_gpio); + p_bcm_device->dev_wake_gpio = NULL; + goto end; + } else { + BT_DBG("%s - dev_wake set to %d", __func__, + gpio_value); + } + } + + /* Get power on/off GPIO */ + p_bcm_device->reg_on_gpio = gpiod_get(&pdev->dev, "bt-reg-on"); + BT_DBG("%s - gpiod_get for bt-reg-on returned %p", __func__, + p_bcm_device->reg_on_gpio); + if (IS_ERR(p_bcm_device->reg_on_gpio)) { + ret = PTR_ERR(p_bcm_device->reg_on_gpio); + if (ret != -ENOENT) { + dev_err(&pdev->dev, + "%s - reg_on GPIO: %d\n", __func__, ret); + } + p_bcm_device->reg_on_gpio = NULL; + } else { + int poweron_flag; + + p_bcm_device->reg_on_active_low = gpiod_is_active_low + (p_bcm_device->reg_on_gpio); + BT_DBG("%s - reg_on a-low is %d (cans %d)", + __func__, p_bcm_device->reg_on_active_low, + gpiod_cansleep(p_bcm_device->reg_on_gpio)); + + /* configure reg_on as output with init on state */ + poweron_flag = !p_bcm_device->reg_on_active_low; + ret = gpiod_direction_output(p_bcm_device->reg_on_gpio, + poweron_flag); + if (ret < 0) { + dev_err(&pdev->dev, + "%s set reg_on GPIO: %d\n", __func__, ret); + gpiod_put(p_bcm_device->reg_on_gpio); + p_bcm_device->reg_on_gpio = NULL; + } else { + BT_DBG("%s - reg_on initially set to %d", __func__, + poweron_flag); + } + } + + platform_set_drvdata(pdev, p_bcm_device); + /* Must be done before interrupt is requested */ + INIT_WORK(&p_bcm_device->wakeup_work, bcm_bt_wakeup_task); + + /* Get bt host wake GPIO */ + p_bcm_device->bt_wake_gpio = gpiod_get(&pdev->dev, "bt-host-wake"); + BT_DBG("%s - gpiod_get for bt-host-wake returned %p", __func__, + p_bcm_device->bt_wake_gpio); + if (IS_ERR(p_bcm_device->bt_wake_gpio)) { + ret = PTR_ERR(p_bcm_device->bt_wake_gpio); + if (ret != -ENOENT) { + dev_err(&pdev->dev, + "%s - bt_wake GPIO: %d\n", __func__, ret); + } + p_bcm_device->bt_wake_gpio = NULL; + } else { + /* configure bt_wake as input */ + ret = gpiod_direction_input(p_bcm_device->bt_wake_gpio); + if (ret < 0) { + dev_err(&pdev->dev, + "%s set bt_wake GPIO: %d\n", __func__, ret); + gpiod_put(p_bcm_device->bt_wake_gpio); + p_bcm_device->bt_wake_gpio = NULL; + } else { + p_bcm_device->bt_wake_active_low = gpiod_is_active_low + (p_bcm_device->bt_wake_gpio); + BT_DBG("%s -bt_wake a-low is %d(cans%d)", + __func__, p_bcm_device->bt_wake_active_low, + gpiod_cansleep(p_bcm_device->bt_wake_gpio)); + p_bcm_device->bt_wake_irq = gpiod_to_irq + (p_bcm_device->bt_wake_gpio); + if (p_bcm_device->bt_wake_irq < 0) { + dev_err(&pdev->dev, + "%s - HOST_WAKE IRQ: %d\n", __func__, ret); + } else { + unsigned long intflags = IRQF_TRIGGER_RISING; + + if (p_bcm_device->bt_wake_active_low) + intflags = IRQF_TRIGGER_FALLING; + + ret = request_irq(p_bcm_device->bt_wake_irq, + bcm_bt_uart_isr, + intflags, "bt_host_wake", + p_bcm_device); + if (ret < 0) { + dev_err(&pdev->dev, + "%s - failed IRQ %d: %d", + __func__, + p_bcm_device->bt_wake_irq, ret); + } else { + BT_DBG("%s - IRQ %d", __func__, + p_bcm_device->bt_wake_irq); + } + } + } + } + + p_bcm_device->configure_sleep = of_property_read_bool( + np, "configure-sleep"); + BT_DBG("configure-sleep read as %d", p_bcm_device->configure_sleep); + p_bcm_device->manual_fc = 0; + if (!of_property_read_u32(np, "manual-fc", + &p_bcm_device->manual_fc)) { + BT_DBG("manual-fc read as %d", + p_bcm_device->manual_fc); + } + p_bcm_device->oper_speed = 3000000; + if (!of_property_read_u32( + np, "oper-speed", + &p_bcm_device->oper_speed)) { + BT_DBG("oper-speed read as %d", + p_bcm_device->oper_speed); + } + p_bcm_device->configure_audio = of_property_read_bool( + np, "configure-audio"); + BT_DBG("configure-audio read as %d", p_bcm_device->configure_audio); + if (p_bcm_device->configure_audio) { + /* Defaults for audio */ + p_bcm_device->pcm_clockmode = 0; + p_bcm_device->pcm_fillmethod = 2; + p_bcm_device->pcm_fillnum = 0; + p_bcm_device->pcm_fillvalue = 3; + p_bcm_device->pcm_incallbitclock = 0; + p_bcm_device->pcm_lsbfirst = 0; + p_bcm_device->pcm_rightjustify = 0; + p_bcm_device->pcm_routing = 0; + p_bcm_device->pcm_shortframesync = 0; + p_bcm_device->pcm_syncmode = 0; + + if (!of_property_read_u32(np, "pcm-clockmode", + &p_bcm_device->pcm_clockmode)) + BT_DBG("pcm-clockmode read as %d", + p_bcm_device->pcm_clockmode); + if (!of_property_read_u32(np, "pcm-fillmethod", + &p_bcm_device->pcm_fillmethod)) + BT_DBG("pcm-fillmethod readas %d", + p_bcm_device->pcm_fillmethod); + if (!of_property_read_u32(np, "pcm-fillnum", + &p_bcm_device->pcm_fillnum)) + BT_DBG("pcm-fillnum read as %d", + p_bcm_device->pcm_fillnum); + if (!of_property_read_u32(np, "pcm-fillvalue", + &p_bcm_device->pcm_fillvalue)) + BT_DBG("pcm-fillvalue read as %d", + p_bcm_device->pcm_fillvalue); + if (!of_property_read_u32(np, "pcm-incallbitclock", + &p_bcm_device->pcm_incallbitclock)) + BT_DBG("pcm-incallbitclock read as %d", + p_bcm_device->pcm_incallbitclock); + if (!of_property_read_u32(np, "pcm-lsbfirst", + &p_bcm_device->pcm_lsbfirst)) + BT_DBG("pcm-lsbfirst read as %d", + p_bcm_device->pcm_lsbfirst); + if (!of_property_read_u32(np, "pcm-rightjustify", + &p_bcm_device->pcm_rightjustify)) + BT_DBG("pcm-rightjustify read as %d", + p_bcm_device->pcm_rightjustify); + if (!of_property_read_u32(np, "pcm-routing", + &p_bcm_device->pcm_routing)) + BT_DBG("pcm-routing read as %d", + p_bcm_device->pcm_routing); + if (!of_property_read_u32(np, "pcm-shortframesync", + &p_bcm_device->pcm_shortframesync)) + BT_DBG("pcm-shortframesync read as %d", + p_bcm_device->pcm_shortframesync); + if (!of_property_read_u32(np, "pcm-syncmode", + &p_bcm_device->pcm_syncmode)) + BT_DBG("pcm-syncmode read as %d", + p_bcm_device->pcm_syncmode); + } + + if (!of_property_read_string(np, "tty", &tty_name)) { + strcpy(p_bcm_device->tty_name, tty_name); + BT_DBG("tty name read as %s", p_bcm_device->tty_name); + } + + BT_DBG("idle_timeout set as %d", idle_timeout); + + ret = 0; /* If we made it here, we're fine */ + + /* Place this instance on the device list */ + spin_lock(&device_list_lock); + list_add_tail(&p_bcm_device->list, &device_list); + spin_unlock(&device_list_lock); + +end: + if (ret) { + if (p_bcm_device->reg_on_gpio) { + gpiod_put(p_bcm_device->reg_on_gpio); + p_bcm_device->reg_on_gpio = NULL; + } + if (p_bcm_device->bt_wake_gpio) { + gpiod_put(p_bcm_device->bt_wake_gpio); + p_bcm_device->bt_wake_gpio = NULL; + } + if (p_bcm_device->dev_wake_gpio) { + gpiod_put(p_bcm_device->dev_wake_gpio); + p_bcm_device->dev_wake_gpio = NULL; + } + } + + BT_DBG("%s with the result %d", __func__, ret); + return ret; +} + +/* + * Device instance removal + */ +static int bcm_bt_uart_remove(struct platform_device *pdev) +{ + struct bcm_device *p_bcm_device = platform_get_drvdata(pdev); + + if (p_bcm_device == NULL) { + BT_DBG("%s - logic error, no probe?!", __func__); + return 0; + } + + BT_DBG("%s %p context", __func__, p_bcm_device); + + spin_lock(&device_list_lock); + list_del(&p_bcm_device->list); + spin_unlock(&device_list_lock); + + BT_DBG("%s - freeing interrupt %d", __func__, + p_bcm_device->bt_wake_irq); + free_irq(p_bcm_device->bt_wake_irq, p_bcm_device); + + if (p_bcm_device->reg_on_gpio) { + BT_DBG("%s - releasing reg_on_gpio", __func__); + gpiod_put(p_bcm_device->reg_on_gpio); + p_bcm_device->reg_on_gpio = NULL; + } + + if (p_bcm_device->dev_wake_gpio) { + BT_DBG("%s - releasing dev_wake_gpio", __func__); + gpiod_put(p_bcm_device->dev_wake_gpio); + p_bcm_device->dev_wake_gpio = NULL; + } + + if (p_bcm_device->bt_wake_gpio) { + BT_DBG("%s - releasing bt_wake_gpio", __func__); + gpiod_put(p_bcm_device->bt_wake_gpio); + p_bcm_device->bt_wake_gpio = NULL; + } + + BT_DBG("%s %p done", __func__, p_bcm_device); + return 0; +} + +/* + * Platform resume callback + */ +static int bcm_bt_uart_resume(struct device *pdev) +{ + int gpio_value; + struct bcm_device *p_bcm_device = platform_get_drvdata( + to_platform_device(pdev)); + + if (p_bcm_device == NULL) { + BT_DBG("%s - logic error, no device?!", __func__); + return 0; + } + + BT_DBG("%s %p", __func__, p_bcm_device); + + gpio_value = !p_bcm_device->dev_wake_active_low; + if (p_bcm_device->dev_wake_gpio) { + gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value); + BT_DBG("%s - %d written, delaying 15 ms", __func__, + gpio_value); + mdelay(15); + } + + /* Let the protocol know the platform is resuming */ + if (p_bcm_device->protocol_callbacks.p_resume) + p_bcm_device->protocol_callbacks.p_resume( + p_bcm_device->protocol_callbacks.context); + + return 0; +} + +/* + * Platform suspend callback + */ +static int bcm_bt_uart_suspend(struct device *pdev) +{ + int gpio_value; + struct bcm_device *p_bcm_device = platform_get_drvdata( + to_platform_device(pdev)); + + if (p_bcm_device == NULL) { + BT_DBG("%s - logic error, no device?!", __func__); + return 0; + } + + BT_DBG("%s %p", __func__, p_bcm_device); + + /* Let the protocol know the platform is suspending */ + if (p_bcm_device->protocol_callbacks.p_suspend) + p_bcm_device->protocol_callbacks.p_suspend( + p_bcm_device->protocol_callbacks.context); + + /* Suspend the device */ + if (p_bcm_device->dev_wake_gpio) { + gpio_value = !!p_bcm_device->dev_wake_active_low; + gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value); + BT_DBG("%s - %d written, delaying 15 ms", __func__, + gpio_value); + mdelay(15); + } + + return 0; +} + +/* + * Entry point for calls from the protocol + */ +int btbcm_uart_control(int action, void *device_context, + void *p_data, unsigned long *p_size) +{ + struct btbcm_uart_callbacks *pc; + struct btbcm_uart_parameters *pp = p_data; /* for pars action only */ + int ret = 0; + int gpio_value, poweron_flag; + struct bcm_device *p_bcm_device = device_context; + struct list_head *ptr; + bool is_found = false; + + /* Special processing for the callback configuration */ + if (action == BTBCM_UART_ACTION_CONFIGURE_CALLBACKS) { + pc = p_data; + + BT_DBG("%s - configure callbacks", __func__); + if (p_data == NULL || *p_size != sizeof(struct + btbcm_uart_callbacks) || (pc->interface_version != + BTBCM_UART_INTERFACE_VERSION)) { + BT_DBG("%s - callbacks mismatch!", __func__); + return -E2BIG; + } + + BT_DBG("%s - configure callbacks for %s(%p)", __func__, + pc->name, pc->context); + if (p_bcm_device == NULL) { + spin_lock(&device_list_lock); + list_for_each(ptr, &device_list) { + p_bcm_device = list_entry(ptr, struct + bcm_device, list); + if (!strcmp(p_bcm_device->tty_name, pc->name)) { + is_found = true; + break; + } + } + + spin_unlock(&device_list_lock); + if (!is_found) { + BT_DBG("%s - no device!", __func__); + return -ENOENT; + } + } + + p_bcm_device->protocol_callbacks = *pc; + memcpy(p_data, &p_bcm_device, sizeof(p_bcm_device)); + *p_size = sizeof(p_bcm_device); + return ret; + } + + /* All other requests must have the right context */ + if (p_bcm_device == NULL) { + BT_DBG("%s - failing, no device", __func__); + return -ENOENT; + } + + switch (action) { + case BTBCM_UART_ACTION_POWER_ON: + BT_DBG("%s %p - power on", __func__, device_context); + if (p_bcm_device->reg_on_gpio) { + poweron_flag = !p_bcm_device->reg_on_active_low; + gpiod_set_value(p_bcm_device->reg_on_gpio, + poweron_flag); + BT_DBG("%s - pwron %d, delay 15 ms", __func__, + poweron_flag); + mdelay(15); + } + break; + + case BTBCM_UART_ACTION_POWER_OFF: + BT_DBG("%s %p - power off", __func__, device_context); + if (p_bcm_device->reg_on_gpio) { + poweron_flag = p_bcm_device->reg_on_active_low; + gpiod_set_value(p_bcm_device->reg_on_gpio, + poweron_flag); + BT_DBG("%s - pwroff %d, delay 15 ms", __func__, + poweron_flag); + mdelay(15); + } + break; + + case BTBCM_UART_ACTION_RESUME: + BT_DBG("%s %p - resume", __func__, device_context); + if (p_bcm_device->dev_wake_gpio) { + gpio_value = !p_bcm_device->dev_wake_active_low; + gpiod_set_value(p_bcm_device->dev_wake_gpio, + gpio_value); + BT_DBG("%s - resume %d, delay 15 ms", __func__, + gpio_value); + mdelay(15); + } + break; + + case BTBCM_UART_ACTION_SUSPEND: + BT_DBG("%s %p - suspend", __func__, device_context); + if (p_bcm_device->dev_wake_gpio) { + gpio_value = !!p_bcm_device->dev_wake_active_low; + gpiod_set_value(p_bcm_device->dev_wake_gpio, + gpio_value); + BT_DBG("btbcm_uart_control - suspend %d, delay 15ms", + gpio_value); + mdelay(15); + } + break; + + case BTBCM_UART_ACTION_GET_PARAMETERS: + BT_DBG("%s %p - get pars", __func__, device_context); + if ((p_data == NULL) || + (*p_size < sizeof(struct btbcm_uart_parameters))) { + BT_DBG("%s - failing, wrong par size", __func__); + return -E2BIG; + } + + memset(pp, 0, sizeof(struct btbcm_uart_parameters)); + pp->interface_version = BTBCM_UART_INTERFACE_VERSION; + pp->configure_sleep = p_bcm_device->configure_sleep; + pp->manual_fc = p_bcm_device->manual_fc; + pp->dev_wake_active_low = p_bcm_device->dev_wake_active_low; + pp->bt_wake_active_low = p_bcm_device->bt_wake_active_low; + pp->idle_timeout_in_secs = idle_timeout; + pp->oper_speed = p_bcm_device->oper_speed; + pp->configure_audio = p_bcm_device->configure_audio; + pp->pcm_clockmode = p_bcm_device->pcm_clockmode; + pp->pcm_fillmethod = p_bcm_device->pcm_fillmethod; + pp->pcm_fillnum = p_bcm_device->pcm_fillnum; + pp->pcm_fillvalue = p_bcm_device->pcm_fillvalue; + pp->pcm_incallbitclock = p_bcm_device->pcm_incallbitclock; + pp->pcm_lsbfirst = p_bcm_device->pcm_lsbfirst; + pp->pcm_rightjustify = p_bcm_device->pcm_rightjustify; + pp->pcm_routing = p_bcm_device->pcm_routing; + pp->pcm_shortframesync = p_bcm_device->pcm_shortframesync; + pp->pcm_syncmode = p_bcm_device->pcm_syncmode; + *p_size = sizeof(struct btbcm_uart_parameters); + break; + + default: + BT_DBG("%s %p unknown act %d", __func__, + device_context, action); + ret = -EINVAL; + break; + } + + return ret; +} +EXPORT_SYMBOL(btbcm_uart_control); + +/* Platform susp and resume callbacks */ +static SIMPLE_DEV_PM_OPS(bcm_bt_uart_pm_ops, + bcm_bt_uart_suspend, bcm_bt_uart_resume); + +/* Driver match table */ +static const struct of_device_id bcm_bt_uart_table[] = { + { .compatible = "brcm,brcm-bt-uart" }, + {} +}; + +/* Driver configuration */ +static struct platform_driver bcm_bt_uart_driver = { + .probe = bcm_bt_uart_probe, + .remove = bcm_bt_uart_remove, + .driver = { + .name = "brcm_bt_uart", + .of_match_table = of_match_ptr(bcm_bt_uart_table), + .owner = THIS_MODULE, + .pm = &bcm_bt_uart_pm_ops, + }, +}; + +module_platform_driver(bcm_bt_uart_driver); + +MODULE_AUTHOR("Ilya Faenson"); +MODULE_DESCRIPTION("Broadcom Bluetooth UART Driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/bluetooth/btbcm_uart.h b/drivers/bluetooth/btbcm_uart.h new file mode 100644 index 0000000..fbc7285 --- /dev/null +++ b/drivers/bluetooth/btbcm_uart.h @@ -0,0 +1,89 @@ +/* + * Bluetooth BCM UART Driver Header + * + * Copyright (c) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef BTBCM_UART_H +#define BTBCM_UART_H + +/* Change the version if you change anything in this header */ +#define BTBCM_UART_INTERFACE_VERSION 1 +/* Callbacks from the driver into the protocol */ +typedef void (*p_suspend_callback)(void *context); +typedef void (*p_resume_callback)(void *context); +typedef void (*p_wakeup_callback)(void *context); +struct btbcm_uart_callbacks { + int interface_version; /* interface # compiled against */ + void *context; /* protocol instance context */ + char name[64]; /* protocol tty device, for example, ttyS0 */ + + /* client callbacks */ + p_suspend_callback p_suspend; + p_resume_callback p_resume; + p_wakeup_callback p_wakeup; +}; + +/* Driver parameters retrieved from the DT or ACPI */ +struct btbcm_uart_parameters { + int interface_version; /* interface # compiled against */ + + /* Parameters themselves */ + bool configure_sleep; + int manual_fc; + int dev_wake_active_low; + int bt_wake_active_low; + int idle_timeout_in_secs; + int oper_speed; + bool configure_audio; + int pcm_clockmode; + int pcm_fillmethod; + int pcm_fillnum; + int pcm_fillvalue; + int pcm_incallbitclock; + int pcm_lsbfirst; + int pcm_rightjustify; + int pcm_routing; + int pcm_shortframesync; + int pcm_syncmode; +}; + +/* + * Actions on the BTBCM_UART driver + */ + +/* Configure protocol callbacks */ +#define BTBCM_UART_ACTION_CONFIGURE_CALLBACKS 0 + +/* Retrieve BT device parameters */ +#define BTBCM_UART_ACTION_GET_PARAMETERS 1 + +/* Resume the BT device via GPIO */ +#define BTBCM_UART_ACTION_RESUME 2 + +/* Suspend the BT device via GPIO */ +#define BTBCM_UART_ACTION_SUSPEND 3 + +/* Power the BT device off via GPIO */ +#define BTBCM_UART_ACTION_POWER_OFF 4 + +/* Power the BT device on via GPIO */ +#define BTBCM_UART_ACTION_POWER_ON 5 + +/* Execute an action on the BT device */ +extern int btbcm_uart_control(int action, void *device_context, + void *p_data, unsigned long *p_size); + +#endif + -- 1.9.1