Return-Path: From: Amitkumar Karwar To: CC: Cathy Luo , Zhaoyang Liu , Amitkumar Karwar Subject: [PATCH 2/2] Bluetooth: btmrvl: add sd8997 chipset support Date: Fri, 18 Sep 2015 06:40:41 -0700 Message-ID: <1442583641-3182-2-git-send-email-akarwar@marvell.com> In-Reply-To: <1442583641-3182-1-git-send-email-akarwar@marvell.com> References: <1442583641-3182-1-git-send-email-akarwar@marvell.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-bluetooth-owner@vger.kernel.org List-ID: From: Zhaoyang Liu This patch adds support for Marvell's new chipset SD8997. Register offsets and supported feature flags are updated. Signed-off-by: Zhaoyang Liu Signed-off-by: Cathy Luo Signed-off-by: Amitkumar Karwar --- drivers/bluetooth/Kconfig | 4 ++-- drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 0bd88c9..3d480d8 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -275,7 +275,7 @@ config BT_MRVL The core driver to support Marvell Bluetooth devices. This driver is required if you want to support - Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897. + Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997. Say Y here to compile Marvell Bluetooth driver into the kernel or say M to compile it as module. @@ -289,7 +289,7 @@ config BT_MRVL_SDIO The driver for Marvell Bluetooth chipsets with SDIO interface. This driver is required if you want to use Marvell Bluetooth - devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897 + devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997 chipsets are supported. Say Y here to compile support for Marvell BT-over-SDIO driver diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 5f7c9be..6e2c6d5 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -146,6 +146,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = { .fw_dump_end = 0xea, }; +static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = { + .cfg = 0x00, + .host_int_mask = 0x08, + .host_intstatus = 0x0c, + .card_status = 0x5c, + .sq_read_base_addr_a0 = 0xf8, + .sq_read_base_addr_a1 = 0xf9, + .card_revision = 0xc8, + .card_fw_status0 = 0xe8, + .card_fw_status1 = 0xe9, + .card_rx_len = 0xea, + .card_rx_unit = 0xeb, + .io_port_0 = 0xe4, + .io_port_1 = 0xe5, + .io_port_2 = 0xe6, + .int_read_to_clear = true, + .host_int_rsr = 0x04, + .card_misc_cfg = 0xD8, + .fw_dump_ctrl = 0xf0, + .fw_dump_start = 0xf1, + .fw_dump_end = 0xf8, +}; + static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { .helper = "mrvl/sd8688_helper.bin", .firmware = "mrvl/sd8688.bin", @@ -191,6 +214,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { .supports_fw_dump = true, }; +static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = { + .helper = NULL, + .firmware = "mrvl/sdsd8997_combo.bin", + .reg = &btmrvl_reg_8997, + .support_pscan_win_report = true, + .sd_blksz_fw_dl = 256, + .supports_fw_dump = true, +}; + static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8688 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105), @@ -210,6 +242,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = { /* Marvell SD8897 Bluetooth device */ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E), .driver_data = (unsigned long) &btmrvl_sdio_sd8897 }, + /* Marvell SD8997 Bluetooth device */ + { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142), + .driver_data = (unsigned long)&btmrvl_sdio_sd8997 }, { } /* Terminating entry */ }; @@ -1622,3 +1657,4 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sdsd8997_combo.bin"); -- 1.8.1.4