Return-Path: MIME-Version: 1.0 In-Reply-To: References: Date: Mon, 8 Feb 2016 22:08:30 +0000 Message-ID: Subject: Re: Error 133 (0x85): GATT ERROR From: Barry Byford <31baz66@gmail.com> To: Bluez mailing list Content-Type: text/plain; charset=UTF-8 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hello Luiz, On 8 February 2016 at 10:13, Luiz Augusto von Dentz wrote: > Hi Barry, > > On Sat, Feb 6, 2016 at 10:30 PM, Barry Byford <31baz66@gmail.com> wrote: >> Hello, [snip] >> The code I have running can be found at: >> https://github.com/ukBaz/python-bluezero/blob/master/examples/battery_service.py [snip] >> On the Nordic nRF Master Control Panel (BLE) app I can see in the log >> 'Error 133 (0x85): GATT ERROR)' [snip] > Perhaps if you can take the HCI and bluetoothd it should help to see > where is the problem. Btw, it could be that Android is attempting to > connect over BR/EDR or did you configure your adapter to as BLE only? If I do a hcidump when I try to connect from my phone I get the following: - HCI Event: Connect Request (0x04) plen 10 bdaddr xx:xx:xx:xx:xx:xx class 0x5a020c type ACL - HCI Event: Command Status (0x0f) plen 4 Reject Connection Request (0x01|0x000a) status 0x00 ncmd 1 - HCI Event: Connect Complete (0x03) plen 11 status 0x0f handle 65 bdaddr xx:xx:xx:xx:xx:xx type ACL encrypt 0x00 Error: Connection Rejected due to Unacceptable BD_ADDR According to my phone the code on the Raspberry Pi is advertising with only the 'LE General Discoverable Mode' flag set. The 'BR/EDR not Supported' is not set. I've looked at the DBus API documentation again and it is not obvious that I can change this setting on the advertisement. Am I missing something? Thanks, Barry