Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 9.3 \(3124\)) Subject: Re: [PATCH v7] Bluetooth: hci_uart: Support firmware download for Marvell From: Marcel Holtmann In-Reply-To: Date: Tue, 12 Apr 2016 18:17:44 +0200 Cc: "linux-bluetooth@vger.kernel.org" , Ganapathi Bhat Message-Id: References: <1459845266-2771-1-git-send-email-akarwar@marvell.com> To: Amitkumar Karwar Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Amitkumar, >> From: Amitkumar Karwar [mailto:akarwar@marvell.com] >> Sent: Tuesday, April 05, 2016 2:04 PM >> To: linux-bluetooth@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org; Ganapathi Bhat; Amitkumar Karwar >> Subject: [PATCH v7] Bluetooth: hci_uart: Support firmware download for >> Marvell >> >> From: Ganapathi Bhat >> >> This patch implement firmware download feature for Marvell Bluetooth >> devices. If firmware is already downloaded, it will skip downloading. >> >> Signed-off-by: Ganapathi Bhat >> Signed-off-by: Amitkumar Karwar >> --- >> v2: Fixed compilation warning reported by kbuild test robot >> v3: Addressed review comments from Marcel Holtmann >> a) Removed vendor specific code from hci_ldisc.c >> b) Get rid of static forward declaration >> c) Removed unnecessary heavy nesting >> d) Git rid of module parameter and global variables >> e) Add logic to pick right firmware image >> v4: Addresses review comments from Alan >> a) Use existing kernel helper APIs instead of writing own. >> b) Replace mdelay() with msleep() >> v5: Addresses review comments from Loic Poulain >> a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG >> b) Used static functions where required and removed forward >> delcarations >> c) Edited comments for the function hci_uart_recv_data >> d) Made HCI_UART_DNLD_FW flag a part of driver private data >> v6: Addresses review comments from Loic Poulain >> a) Used skb instead of array to store firmware data during download >> b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write >> c) Used GFP_KERNEL instead of GFP_ATOMIC >> v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change >> resolves >> errors reported by kbuild test robot. >> --- >> drivers/bluetooth/Kconfig | 11 + >> drivers/bluetooth/Makefile | 1 + >> drivers/bluetooth/btmrvl.h | 43 ++++ >> drivers/bluetooth/hci_ldisc.c | 6 + >> drivers/bluetooth/hci_mrvl.c | 568 >> ++++++++++++++++++++++++++++++++++++++++++ >> drivers/bluetooth/hci_uart.h | 8 +- >> 6 files changed, 636 insertions(+), 1 deletion(-) create mode 100644 >> drivers/bluetooth/btmrvl.h create mode 100644 >> drivers/bluetooth/hci_mrvl.c >> > > Could you please take this patch if there are no further comments/suggestions? didn't I see a kbot build warning for this version as well? Or was that the previous version? Regards Marcel