Return-Path: From: Amitkumar Karwar To: "linux-bluetooth@vger.kernel.org" CC: Ganapathi Bhat Subject: RE: [PATCH v7] Bluetooth: hci_uart: Support firmware download for Marvell Date: Tue, 12 Apr 2016 14:57:52 +0000 Message-ID: References: <1459845266-2771-1-git-send-email-akarwar@marvell.com> In-Reply-To: <1459845266-2771-1-git-send-email-akarwar@marvell.com> Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Marcel, > From: Amitkumar Karwar [mailto:akarwar@marvell.com] > Sent: Tuesday, April 05, 2016 2:04 PM > To: linux-bluetooth@vger.kernel.org > Cc: linux-kernel@vger.kernel.org; Ganapathi Bhat; Amitkumar Karwar > Subject: [PATCH v7] Bluetooth: hci_uart: Support firmware download for > Marvell > > From: Ganapathi Bhat > > This patch implement firmware download feature for Marvell Bluetooth > devices. If firmware is already downloaded, it will skip downloading. > > Signed-off-by: Ganapathi Bhat > Signed-off-by: Amitkumar Karwar > --- > v2: Fixed compilation warning reported by kbuild test robot > v3: Addressed review comments from Marcel Holtmann > a) Removed vendor specific code from hci_ldisc.c > b) Get rid of static forward declaration > c) Removed unnecessary heavy nesting > d) Git rid of module parameter and global variables > e) Add logic to pick right firmware image > v4: Addresses review comments from Alan > a) Use existing kernel helper APIs instead of writing own. > b) Replace mdelay() with msleep() > v5: Addresses review comments from Loic Poulain > a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG > b) Used static functions where required and removed forward > delcarations > c) Edited comments for the function hci_uart_recv_data > d) Made HCI_UART_DNLD_FW flag a part of driver private data > v6: Addresses review comments from Loic Poulain > a) Used skb instead of array to store firmware data during download > b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write > c) Used GFP_KERNEL instead of GFP_ATOMIC > v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change > resolves > errors reported by kbuild test robot. > --- > drivers/bluetooth/Kconfig | 11 + > drivers/bluetooth/Makefile | 1 + > drivers/bluetooth/btmrvl.h | 43 ++++ > drivers/bluetooth/hci_ldisc.c | 6 + > drivers/bluetooth/hci_mrvl.c | 568 > ++++++++++++++++++++++++++++++++++++++++++ > drivers/bluetooth/hci_uart.h | 8 +- > 6 files changed, 636 insertions(+), 1 deletion(-) create mode 100644 > drivers/bluetooth/btmrvl.h create mode 100644 > drivers/bluetooth/hci_mrvl.c > Could you please take this patch if there are no further comments/suggestions? Regards, Amitkumar