Return-Path: <linux-kernel-owner@vger.kernel.org>
From: Amitkumar Karwar <akarwar@marvell.com>
To: "linux-bluetooth@vger.kernel.org" <linux-bluetooth@vger.kernel.org>
CC: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Ganapathi Bhat" <gbhat@marvell.com>
Subject: RE: [PATCH v11 3/3] Bluetooth: hci_uart: Support firmware download
 for Marvell
Date: Tue, 10 May 2016 13:59:09 +0000
Message-ID: <7dd472e261ac43da97c607a005418fcb@SC-EXCH04.marvell.com>
References: <1462548714-7971-1-git-send-email-akarwar@marvell.com>
 <1462548714-7971-3-git-send-email-akarwar@marvell.com>
In-Reply-To: <1462548714-7971-3-git-send-email-akarwar@marvell.com>
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-bluetooth.vger.kernel.org>

Hi Marcel,

> From: Amitkumar Karwar [mailto:akarwar@marvell.com]
> Sent: Friday, May 06, 2016 9:02 PM
> To: linux-bluetooth@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org; Ganapathi Bhat; Amitkumar Karwar
> Subject: [PATCH v11 3/3] Bluetooth: hci_uart: Support firmware download
> for Marvell
> 
> From: Ganapathi Bhat <gbhat@marvell.com>
> 
> This patch implement firmware download feature for Marvell Bluetooth
> devices. If firmware is already downloaded, it will skip downloading.
> 
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
> ---
> v2: Fixed compilation warning reported by kbuild test robot
> v3: Addressed review comments from Marcel Holtmann
>     a) Removed vendor specific code from hci_ldisc.c
>     b) Get rid of static forward declaration
>     c) Removed unnecessary heavy nesting
>     d) Git rid of module parameter and global variables
>     e) Add logic to pick right firmware image
> v4: Addresses review comments from Alan
>     a) Use existing kernel helper APIs instead of writing own.
>     b) Replace mdelay() with msleep()
> v5: Addresses review comments from Loic Poulain
>     a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG
>     b) Used static functions where required and removed forward
> delcarations
>     c) Edited comments for the function hci_uart_recv_data
>     d) Made HCI_UART_DNLD_FW flag a part of driver private data
> v6: Addresses review comments from Loic Poulain
>     a) Used skb instead of array to store firmware data during download
>     b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write
>     c) Used GFP_KERNEL instead of GFP_ATOMIC
> v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change
> resolves
>     errors reported by kbuild test robot.
> v8: Addressed review comments from Marcel Holtmann
>     a) Removed unnecessary memory allocation failure messages
>     b) Get rid of btmrvl.h header file and add definitions in hci_mrvl.c
> file
> v9: Addressed review comments from Marcel Holtmann
>     a) Moved firmware download code from setup to prepare handler.
>     b) Change messages from bt_dev_*->BT_*, as hdev isn't available
> during firmware
>      download.
> v10: Addressed review comments from Marcel Holtmann
>     a) Added new callback recv_for_prepare to receive data from device
>      during prepare phase
>     b) Avoided using private flags (HCI_UART_DNLD_FW) as new receive
> callback is
>      added for the same purpose
>     c) Used kernel API to handle unaligned data
>     d) Moved mrvl_set_baud functionality inside setup callback
> v11: Write data through ldisc in mrvl_send_ack() instead of directly
> calling
>     write method(One Thousand Gnomes).

Could you please take this patch if there are no further comments/suggestions for improvement?

Regards,
Amitkumar