Return-Path: MIME-Version: 1.0 In-Reply-To: References: From: Emil Lenngren Date: Thu, 8 Dec 2016 20:54:44 +0100 Message-ID: Subject: Re: BLE bug: Intel Bluetooth 7260 fails to scan and connect concurrently To: "G, Jaya P" Cc: Bluez mailing list Content-Type: text/plain; charset=UTF-8 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Jaya, I tried with the firmware you suggested, patch num "25" according to dmesg log, but it has the same bug. I also tried some other revisions but all seem to give the same error. /Emil 2016-12-07 4:53 GMT+00:00 G, Jaya P : > Hi Emil, > > Can you try with this FW and verify. In the latest FW release there's no = changes for the intel 7260 for B3 Card. > http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/c= ommit/?id=3De45d3860987a68a4c317e7b6e62bb81ffde8a93b > > Try with the above FW and share the results. > > Thanks, > Jaya Praveen G > > -----Original Message----- > From: linux-bluetooth-owner@vger.kernel.org [mailto:linux-bluetooth-owner= @vger.kernel.org] On Behalf Of Emil Lenngren > Sent: Wednesday, December 7, 2016 2:05 AM > To: Bluez mailing list > Subject: BLE bug: Intel Bluetooth 7260 fails to scan and connect concurre= ntly > > I recently saw on this mailing list that the intel firmware patches have = been updated, so I downloaded the latest firmware to see it being applied o= n my Asus TP300L computer with Intel Bluetooth 7260: > > [ 2044.429868] usb 1-1.4: new full-speed USB device number 8 using ehci-p= ci [ 2044.524374] usb 1-1.4: New USB device found, idVendor=3D8087, idProdu= ct=3D07dc [ 2044.524383] usb 1-1.4: New USB device strings: Mfr=3D0, Produc= t=3D0, > SerialNumber=3D0 > [ 2044.539193] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ = 2044.539242] Bluetooth: hci0: Intel Bluetooth firmware file: > intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq > [ 2044.728245] Bluetooth: hci0: Intel Bluetooth firmware patch completed = and activated [ 2394.965515] usb 1-1.4: reset full-speed USB device number = 8 using ehci-pci [ 2395.072161] Bluetooth: hci0: read Intel version: 370710= 0180012d0d27 [ 2395.072167] Bluetooth: hci0: Intel device is already patche= d. patch num: 27 > > I have a custom application talking HCI directly and according to the LE = supported states it supports both scanning and initiating a connection at t= he same time. But if I start a LE scan and then initiate a connection, it f= ails with the error code Connection Rejected due to Limited Resources (0x0d= ). If I however do it the other way around, first starting the connection a= ttempt followed by starting scan, everything works as normal. This is clear= ly a bug in the firmware so I was just wondering if there were any Intel gu= ys here willing to fix this? I've actually seen the same problem as well on= a cheap Android Asus tablet having some Intel bluetooth chip in a snoop lo= g. > > This is btmon log where it fails: > > > < HCI Command: Reset (0x03|0x0003) plen 0 > [hci0] 2238.125717 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.138612 > Reset (0x03|0x0003) ncmd 2 > Status: Success (0x00) > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > [hci0] 2238.138702 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2238.139583 > Read Local Version Information (0x04|0x0001) ncmd 1 > Status: Success (0x00) > HCI version: Bluetooth 4.0 (0x06) - Revision 3584 (0x0e00) > LMP version: Bluetooth 4.0 (0x06) - Subversion 3584 (0x0e00) > Manufacturer: Intel Corp. (2) > < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 > [hci0] 2238.139624 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2238.140580 > LE Read Supported States (0x08|0x001c) ncmd 1 > Status: Success (0x00) > States: 0x000000001fffffff > Non-connectable Advertising State > Scannable Advertising State > Connectable Advertising State > High Duty Cycle Directed Advertising State > Passive Scanning State > Active Scanning State > Initiating State > and Connection State (Master Role) > Connection State (Slave Role) > Non-connectable Advertising State > and Passive Scanning State > Scannable Advertising State > and Passive Scanning State > Connectable Advertising State > and Passive Scanning State > High Duty Cycle Directed Advertising State > and Passive Scanning State > Non-connectable Advertising State > and Active Scanning State > Scannable Advertising State > and Active Scanning State > Connectable Advertising State > and Active Scanning State > High Duty Cycle Directed Advertising State > and Active Scanning State > Non-connectable Advertising State > and Initiating State > Scannable Advertising State > and Initiating State > Non-connectable Advertising State > and Connection State (Master Role) > Scannable Advertising State > and Connection State (Master Role) > Non-connectable Advertising State > and Connection State (Slave Role) > Scannable Advertising State > and Connection State (Slave Role) > Passive Scanning State > and Initiating State > Active Scanning State > and Initiating State > Passive Scanning State > and Connection State (Master Role) > Active Scanning State > and Connection State (Master Role) > Passive Scanning State > and Connection State (Slave Role) > Active Scanning State > and Connection State (Slave Role) > Initiating State > and Connection State (Master Role) > and Master Role & Master Role < HCI Command: Set Event Mask (= 0x03|0x0001) plen 8 > [hci0] 2238.140615 > Mask: 0x2000000000018010 > Disconnection Complete > Hardware Error > Flush Occurred > LE Meta >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.141588 > Set Event Mask (0x03|0x0001) ncmd 1 > Status: Success (0x00) > < HCI Command: Set Controller To Host Flow Control (0x03|0x0031) plen > 1 [hci0] 2238.141631 > Flow control: Off (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.142587 > Set Controller To Host Flow Control (0x03|0x0031) ncmd 1 > Status: Success (0x00) > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > [hci0] 2238.142628 >> HCI Event: Command Complete (0x0e) plen 10 = [hci0] 2238.143580 > Read BD ADDR (0x04|0x0009) ncmd 1 > Status: Success (0x00) > Address: 80:19:34:A6:44:B4 (Intel Corporate) < HCI Command: LE Re= ad Buffer Size (0x08|0x0002) plen 0 > [hci0] 2238.143785 >> HCI Event: Command Complete (0x0e) plen 7 = [hci0] 2238.144579 > LE Read Buffer Size (0x08|0x0002) ncmd 1 > Status: Success (0x00) > Data packet length: 27 > Num data packets: 7 > < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 > [hci0] 2238.144607 >> HCI Event: Command Complete (0x0e) plen 5 = [hci0] 2238.145573 > LE Read White List Size (0x08|0x000f) ncmd 1 > Status: Success (0x00) > Size: 32 > < HCI Command: LE Clear White List (0x08|0x0010) plen 0 > [hci0] 2238.145649 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.146580 > LE Clear White List (0x08|0x0010) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 > [hci0] 2238.146610 > Type: Passive (0x00) > Interval: 11.250 msec (0x0012) > Window: 11.250 msec (0x0012) > Own address type: Public (0x00) > Filter policy: Accept all advertisement (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.147569 > LE Set Scan Parameters (0x08|0x000b) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > [hci0] 2278.538597 > Scanning: Enabled (0x01) > Filter duplicates: Disabled (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2278.539579 > LE Set Scan Enable (0x08|0x000c) ncmd 2 > Status: Success (0x00) > < HCI Command: LE Add Device To White List (0x08|0x0011) plen 7 > [hci0] 2283.040471 > Address type: Public (0x00) > Address: 80:E4:DA:70:57:6F (OUI 80-E4-DA) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2283.041654 > LE Add Device To White List (0x08|0x0011) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Create Connection (0x08|0x000d) plen 25 > [hci0] 2283.041752 > Scan interval: 60.000 msec (0x0060) > Scan window: 30.000 msec (0x0030) > Filter policy: White list is used (0x01) > Peer address type: Public (0x00) > Peer address: 00:00:00:00:00:00 (OUI 00-00-00) > Own address type: Public (0x00) > Min connection interval: 20.00 msec (0x0010) > Max connection interval: 25.00 msec (0x0014) > Connection latency: 0x0000 > Supervision timeout: 200 msec (0x0014) > Min connection length: 0.000 msec (0x0000) > Max connection length: 0.000 msec (0x0000) >> HCI Event: Command Status (0x0f) plen 4 = [hci0] 2283.042597 > LE Create Connection (0x08|0x000d) ncmd 1 > Status: Connection Rejected due to Limited Resources (0x0d) > > > > > > And this is the btmon log where the commands are sent in the other order: > > > < HCI Command: Reset (0x03|0x0003) plen 0 > [hci0] 2639.104712 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.117781 > Reset (0x03|0x0003) ncmd 2 > Status: Success (0x00) > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > [hci0] 2639.117842 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2639.118772 > Read Local Version Information (0x04|0x0001) ncmd 1 > Status: Success (0x00) > HCI version: Bluetooth 4.0 (0x06) - Revision 3584 (0x0e00) > LMP version: Bluetooth 4.0 (0x06) - Subversion 3584 (0x0e00) > Manufacturer: Intel Corp. (2) > < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 > [hci0] 2639.118818 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2639.119771 > LE Read Supported States (0x08|0x001c) ncmd 1 > Status: Success (0x00) > States: 0x000000001fffffff > Non-connectable Advertising State > Scannable Advertising State > Connectable Advertising State > High Duty Cycle Directed Advertising State > Passive Scanning State > Active Scanning State > Initiating State > and Connection State (Master Role) > Connection State (Slave Role) > Non-connectable Advertising State > and Passive Scanning State > Scannable Advertising State > and Passive Scanning State > Connectable Advertising State > and Passive Scanning State > High Duty Cycle Directed Advertising State > and Passive Scanning State > Non-connectable Advertising State > and Active Scanning State > Scannable Advertising State > and Active Scanning State > Connectable Advertising State > and Active Scanning State > High Duty Cycle Directed Advertising State > and Active Scanning State > Non-connectable Advertising State > and Initiating State > Scannable Advertising State > and Initiating State > Non-connectable Advertising State > and Connection State (Master Role) > Scannable Advertising State > and Connection State (Master Role) > Non-connectable Advertising State > and Connection State (Slave Role) > Scannable Advertising State > and Connection State (Slave Role) > Passive Scanning State > and Initiating State > Active Scanning State > and Initiating State > Passive Scanning State > and Connection State (Master Role) > Active Scanning State > and Connection State (Master Role) > Passive Scanning State > and Connection State (Slave Role) > Active Scanning State > and Connection State (Slave Role) > Initiating State > and Connection State (Master Role) > and Master Role & Master Role < HCI Command: Set Event Mask (= 0x03|0x0001) plen 8 > [hci0] 2639.119796 > Mask: 0x2000000000018010 > Disconnection Complete > Hardware Error > Flush Occurred > LE Meta >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.120773 > Set Event Mask (0x03|0x0001) ncmd 1 > Status: Success (0x00) > < HCI Command: Set Controller To Host Flow Control (0x03|0x0031) plen > 1 [hci0] 2639.120800 > Flow control: Off (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.121775 > Set Controller To Host Flow Control (0x03|0x0031) ncmd 1 > Status: Success (0x00) > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > [hci0] 2639.121799 >> HCI Event: Command Complete (0x0e) plen 10 = [hci0] 2639.122772 > Read BD ADDR (0x04|0x0009) ncmd 1 > Status: Success (0x00) > Address: 80:19:34:A6:44:B4 (Intel Corporate) < HCI Command: LE Re= ad Buffer Size (0x08|0x0002) plen 0 > [hci0] 2639.122952 >> HCI Event: Command Complete (0x0e) plen 7 = [hci0] 2639.123772 > LE Read Buffer Size (0x08|0x0002) ncmd 1 > Status: Success (0x00) > Data packet length: 27 > Num data packets: 7 > < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 > [hci0] 2639.123803 >> HCI Event: Command Complete (0x0e) plen 5 = [hci0] 2639.124771 > LE Read White List Size (0x08|0x000f) ncmd 1 > Status: Success (0x00) > Size: 32 > < HCI Command: LE Clear White List (0x08|0x0010) plen 0 > [hci0] 2639.124829 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.125780 > LE Clear White List (0x08|0x0010) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 > [hci0] 2639.125824 > Type: Passive (0x00) > Interval: 11.250 msec (0x0012) > Window: 11.250 msec (0x0012) > Own address type: Public (0x00) > Filter policy: Accept all advertisement (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.126797 > LE Set Scan Parameters (0x08|0x000b) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Add Device To White List (0x08|0x0011) plen 7 > [hci0] 2677.822165 > Address type: Public (0x00) > Address: 80:E4:DA:70:57:6F (OUI 80-E4-DA) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2677.822857 > LE Add Device To White List (0x08|0x0011) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Create Connection (0x08|0x000d) plen 25 > [hci0] 2677.822939 > Scan interval: 60.000 msec (0x0060) > Scan window: 30.000 msec (0x0030) > Filter policy: White list is used (0x01) > Peer address type: Public (0x00) > Peer address: 00:00:00:00:00:00 (OUI 00-00-00) > Own address type: Public (0x00) > Min connection interval: 20.00 msec (0x0010) > Max connection interval: 25.00 msec (0x0014) > Connection latency: 0x0000 > Supervision timeout: 200 msec (0x0014) > Min connection length: 0.000 msec (0x0000) > Max connection length: 0.000 msec (0x0000) >> HCI Event: Command Status (0x0f) plen 4 = [hci0] 2677.823814 > LE Create Connection (0x08|0x000d) ncmd 2 > Status: Success (0x00) > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > [hci0] 2686.689549 > Scanning: Enabled (0x01) > Filter duplicates: Disabled (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2686.690890 > LE Set Scan Enable (0x08|0x000c) ncmd 2 > Status: Success (0x00) > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth= " in the body of a message to majordomo@vger.kernel.org More majordomo info= at http://vger.kernel.org/majordomo-info.html 2016-12-07 5:53 GMT+01:00 G, Jaya P : > Hi Emil, > > Can you try with this FW and verify. In the latest FW release there's no = changes for the intel 7260 for B3 Card. > http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/c= ommit/?id=3De45d3860987a68a4c317e7b6e62bb81ffde8a93b > > Try with the above FW and share the results. > > Thanks, > Jaya Praveen G > > -----Original Message----- > From: linux-bluetooth-owner@vger.kernel.org [mailto:linux-bluetooth-owner= @vger.kernel.org] On Behalf Of Emil Lenngren > Sent: Wednesday, December 7, 2016 2:05 AM > To: Bluez mailing list > Subject: BLE bug: Intel Bluetooth 7260 fails to scan and connect concurre= ntly > > I recently saw on this mailing list that the intel firmware patches have = been updated, so I downloaded the latest firmware to see it being applied o= n my Asus TP300L computer with Intel Bluetooth 7260: > > [ 2044.429868] usb 1-1.4: new full-speed USB device number 8 using ehci-p= ci [ 2044.524374] usb 1-1.4: New USB device found, idVendor=3D8087, idProdu= ct=3D07dc [ 2044.524383] usb 1-1.4: New USB device strings: Mfr=3D0, Produc= t=3D0, > SerialNumber=3D0 > [ 2044.539193] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ = 2044.539242] Bluetooth: hci0: Intel Bluetooth firmware file: > intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq > [ 2044.728245] Bluetooth: hci0: Intel Bluetooth firmware patch completed = and activated [ 2394.965515] usb 1-1.4: reset full-speed USB device number = 8 using ehci-pci [ 2395.072161] Bluetooth: hci0: read Intel version: 370710= 0180012d0d27 [ 2395.072167] Bluetooth: hci0: Intel device is already patche= d. patch num: 27 > > I have a custom application talking HCI directly and according to the LE = supported states it supports both scanning and initiating a connection at t= he same time. But if I start a LE scan and then initiate a connection, it f= ails with the error code Connection Rejected due to Limited Resources (0x0d= ). If I however do it the other way around, first starting the connection a= ttempt followed by starting scan, everything works as normal. This is clear= ly a bug in the firmware so I was just wondering if there were any Intel gu= ys here willing to fix this? I've actually seen the same problem as well on= a cheap Android Asus tablet having some Intel bluetooth chip in a snoop lo= g. > > This is btmon log where it fails: > > > < HCI Command: Reset (0x03|0x0003) plen 0 > [hci0] 2238.125717 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.138612 > Reset (0x03|0x0003) ncmd 2 > Status: Success (0x00) > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > [hci0] 2238.138702 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2238.139583 > Read Local Version Information (0x04|0x0001) ncmd 1 > Status: Success (0x00) > HCI version: Bluetooth 4.0 (0x06) - Revision 3584 (0x0e00) > LMP version: Bluetooth 4.0 (0x06) - Subversion 3584 (0x0e00) > Manufacturer: Intel Corp. (2) > < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 > [hci0] 2238.139624 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2238.140580 > LE Read Supported States (0x08|0x001c) ncmd 1 > Status: Success (0x00) > States: 0x000000001fffffff > Non-connectable Advertising State > Scannable Advertising State > Connectable Advertising State > High Duty Cycle Directed Advertising State > Passive Scanning State > Active Scanning State > Initiating State > and Connection State (Master Role) > Connection State (Slave Role) > Non-connectable Advertising State > and Passive Scanning State > Scannable Advertising State > and Passive Scanning State > Connectable Advertising State > and Passive Scanning State > High Duty Cycle Directed Advertising State > and Passive Scanning State > Non-connectable Advertising State > and Active Scanning State > Scannable Advertising State > and Active Scanning State > Connectable Advertising State > and Active Scanning State > High Duty Cycle Directed Advertising State > and Active Scanning State > Non-connectable Advertising State > and Initiating State > Scannable Advertising State > and Initiating State > Non-connectable Advertising State > and Connection State (Master Role) > Scannable Advertising State > and Connection State (Master Role) > Non-connectable Advertising State > and Connection State (Slave Role) > Scannable Advertising State > and Connection State (Slave Role) > Passive Scanning State > and Initiating State > Active Scanning State > and Initiating State > Passive Scanning State > and Connection State (Master Role) > Active Scanning State > and Connection State (Master Role) > Passive Scanning State > and Connection State (Slave Role) > Active Scanning State > and Connection State (Slave Role) > Initiating State > and Connection State (Master Role) > and Master Role & Master Role < HCI Command: Set Event Mask (= 0x03|0x0001) plen 8 > [hci0] 2238.140615 > Mask: 0x2000000000018010 > Disconnection Complete > Hardware Error > Flush Occurred > LE Meta >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.141588 > Set Event Mask (0x03|0x0001) ncmd 1 > Status: Success (0x00) > < HCI Command: Set Controller To Host Flow Control (0x03|0x0031) plen > 1 [hci0] 2238.141631 > Flow control: Off (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.142587 > Set Controller To Host Flow Control (0x03|0x0031) ncmd 1 > Status: Success (0x00) > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > [hci0] 2238.142628 >> HCI Event: Command Complete (0x0e) plen 10 = [hci0] 2238.143580 > Read BD ADDR (0x04|0x0009) ncmd 1 > Status: Success (0x00) > Address: 80:19:34:A6:44:B4 (Intel Corporate) < HCI Command: LE Re= ad Buffer Size (0x08|0x0002) plen 0 > [hci0] 2238.143785 >> HCI Event: Command Complete (0x0e) plen 7 = [hci0] 2238.144579 > LE Read Buffer Size (0x08|0x0002) ncmd 1 > Status: Success (0x00) > Data packet length: 27 > Num data packets: 7 > < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 > [hci0] 2238.144607 >> HCI Event: Command Complete (0x0e) plen 5 = [hci0] 2238.145573 > LE Read White List Size (0x08|0x000f) ncmd 1 > Status: Success (0x00) > Size: 32 > < HCI Command: LE Clear White List (0x08|0x0010) plen 0 > [hci0] 2238.145649 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.146580 > LE Clear White List (0x08|0x0010) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 > [hci0] 2238.146610 > Type: Passive (0x00) > Interval: 11.250 msec (0x0012) > Window: 11.250 msec (0x0012) > Own address type: Public (0x00) > Filter policy: Accept all advertisement (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2238.147569 > LE Set Scan Parameters (0x08|0x000b) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > [hci0] 2278.538597 > Scanning: Enabled (0x01) > Filter duplicates: Disabled (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2278.539579 > LE Set Scan Enable (0x08|0x000c) ncmd 2 > Status: Success (0x00) > < HCI Command: LE Add Device To White List (0x08|0x0011) plen 7 > [hci0] 2283.040471 > Address type: Public (0x00) > Address: 80:E4:DA:70:57:6F (OUI 80-E4-DA) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2283.041654 > LE Add Device To White List (0x08|0x0011) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Create Connection (0x08|0x000d) plen 25 > [hci0] 2283.041752 > Scan interval: 60.000 msec (0x0060) > Scan window: 30.000 msec (0x0030) > Filter policy: White list is used (0x01) > Peer address type: Public (0x00) > Peer address: 00:00:00:00:00:00 (OUI 00-00-00) > Own address type: Public (0x00) > Min connection interval: 20.00 msec (0x0010) > Max connection interval: 25.00 msec (0x0014) > Connection latency: 0x0000 > Supervision timeout: 200 msec (0x0014) > Min connection length: 0.000 msec (0x0000) > Max connection length: 0.000 msec (0x0000) >> HCI Event: Command Status (0x0f) plen 4 = [hci0] 2283.042597 > LE Create Connection (0x08|0x000d) ncmd 1 > Status: Connection Rejected due to Limited Resources (0x0d) > > > > > > And this is the btmon log where the commands are sent in the other order: > > > < HCI Command: Reset (0x03|0x0003) plen 0 > [hci0] 2639.104712 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.117781 > Reset (0x03|0x0003) ncmd 2 > Status: Success (0x00) > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > [hci0] 2639.117842 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2639.118772 > Read Local Version Information (0x04|0x0001) ncmd 1 > Status: Success (0x00) > HCI version: Bluetooth 4.0 (0x06) - Revision 3584 (0x0e00) > LMP version: Bluetooth 4.0 (0x06) - Subversion 3584 (0x0e00) > Manufacturer: Intel Corp. (2) > < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 > [hci0] 2639.118818 >> HCI Event: Command Complete (0x0e) plen 12 = [hci0] 2639.119771 > LE Read Supported States (0x08|0x001c) ncmd 1 > Status: Success (0x00) > States: 0x000000001fffffff > Non-connectable Advertising State > Scannable Advertising State > Connectable Advertising State > High Duty Cycle Directed Advertising State > Passive Scanning State > Active Scanning State > Initiating State > and Connection State (Master Role) > Connection State (Slave Role) > Non-connectable Advertising State > and Passive Scanning State > Scannable Advertising State > and Passive Scanning State > Connectable Advertising State > and Passive Scanning State > High Duty Cycle Directed Advertising State > and Passive Scanning State > Non-connectable Advertising State > and Active Scanning State > Scannable Advertising State > and Active Scanning State > Connectable Advertising State > and Active Scanning State > High Duty Cycle Directed Advertising State > and Active Scanning State > Non-connectable Advertising State > and Initiating State > Scannable Advertising State > and Initiating State > Non-connectable Advertising State > and Connection State (Master Role) > Scannable Advertising State > and Connection State (Master Role) > Non-connectable Advertising State > and Connection State (Slave Role) > Scannable Advertising State > and Connection State (Slave Role) > Passive Scanning State > and Initiating State > Active Scanning State > and Initiating State > Passive Scanning State > and Connection State (Master Role) > Active Scanning State > and Connection State (Master Role) > Passive Scanning State > and Connection State (Slave Role) > Active Scanning State > and Connection State (Slave Role) > Initiating State > and Connection State (Master Role) > and Master Role & Master Role < HCI Command: Set Event Mask (= 0x03|0x0001) plen 8 > [hci0] 2639.119796 > Mask: 0x2000000000018010 > Disconnection Complete > Hardware Error > Flush Occurred > LE Meta >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.120773 > Set Event Mask (0x03|0x0001) ncmd 1 > Status: Success (0x00) > < HCI Command: Set Controller To Host Flow Control (0x03|0x0031) plen > 1 [hci0] 2639.120800 > Flow control: Off (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.121775 > Set Controller To Host Flow Control (0x03|0x0031) ncmd 1 > Status: Success (0x00) > < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > [hci0] 2639.121799 >> HCI Event: Command Complete (0x0e) plen 10 = [hci0] 2639.122772 > Read BD ADDR (0x04|0x0009) ncmd 1 > Status: Success (0x00) > Address: 80:19:34:A6:44:B4 (Intel Corporate) < HCI Command: LE Re= ad Buffer Size (0x08|0x0002) plen 0 > [hci0] 2639.122952 >> HCI Event: Command Complete (0x0e) plen 7 = [hci0] 2639.123772 > LE Read Buffer Size (0x08|0x0002) ncmd 1 > Status: Success (0x00) > Data packet length: 27 > Num data packets: 7 > < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 > [hci0] 2639.123803 >> HCI Event: Command Complete (0x0e) plen 5 = [hci0] 2639.124771 > LE Read White List Size (0x08|0x000f) ncmd 1 > Status: Success (0x00) > Size: 32 > < HCI Command: LE Clear White List (0x08|0x0010) plen 0 > [hci0] 2639.124829 >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.125780 > LE Clear White List (0x08|0x0010) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 > [hci0] 2639.125824 > Type: Passive (0x00) > Interval: 11.250 msec (0x0012) > Window: 11.250 msec (0x0012) > Own address type: Public (0x00) > Filter policy: Accept all advertisement (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2639.126797 > LE Set Scan Parameters (0x08|0x000b) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Add Device To White List (0x08|0x0011) plen 7 > [hci0] 2677.822165 > Address type: Public (0x00) > Address: 80:E4:DA:70:57:6F (OUI 80-E4-DA) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2677.822857 > LE Add Device To White List (0x08|0x0011) ncmd 1 > Status: Success (0x00) > < HCI Command: LE Create Connection (0x08|0x000d) plen 25 > [hci0] 2677.822939 > Scan interval: 60.000 msec (0x0060) > Scan window: 30.000 msec (0x0030) > Filter policy: White list is used (0x01) > Peer address type: Public (0x00) > Peer address: 00:00:00:00:00:00 (OUI 00-00-00) > Own address type: Public (0x00) > Min connection interval: 20.00 msec (0x0010) > Max connection interval: 25.00 msec (0x0014) > Connection latency: 0x0000 > Supervision timeout: 200 msec (0x0014) > Min connection length: 0.000 msec (0x0000) > Max connection length: 0.000 msec (0x0000) >> HCI Event: Command Status (0x0f) plen 4 = [hci0] 2677.823814 > LE Create Connection (0x08|0x000d) ncmd 2 > Status: Success (0x00) > < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 > [hci0] 2686.689549 > Scanning: Enabled (0x01) > Filter duplicates: Disabled (0x00) >> HCI Event: Command Complete (0x0e) plen 4 = [hci0] 2686.690890 > LE Set Scan Enable (0x08|0x000c) ncmd 2 > Status: Success (0x00) > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth= " in the body of a message to majordomo@vger.kernel.org More majordomo info= at http://vger.kernel.org/majordomo-info.html