Return-Path: From: Rob Herring To: Greg Kroah-Hartman , Marcel Holtmann , Jiri Slaby , Sebastian Reichel , Arnd Bergmann , "Dr . H . Nikolaus Schaller" , Peter Hurley , Andy Shevchenko , Alan Cox Cc: Loic Poulain , Pavel Machek , NeilBrown , Linus Walleij , linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 6/9] dt/bindings: Add a serial/UART attached device binding Date: Mon, 16 Jan 2017 16:54:33 -0600 Message-Id: <20170116225436.17505-7-robh@kernel.org> In-Reply-To: <20170116225436.17505-1-robh@kernel.org> References: <20170116225436.17505-1-robh@kernel.org> List-ID: Add a common binding for describing serial/UART attached devices. Common examples are Bluetooth, WiFi, NFC and GPS devices. Serial attached devices are represented as child nodes of a UART node. This may need to be extended for more complex devices with multiple interfaces, but for the simple cases a child node is sufficient. Signed-off-by: Rob Herring --- v2: - Drop reg property - Add max-speed property .../devicetree/bindings/serial/slave-device.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt new file mode 100644 index 000000000000..f66037928f5f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/slave-device.txt @@ -0,0 +1,36 @@ +Serial Slave Device DT binding + +This documents the binding structure and common properties for serial +attached devices. Common examples include Bluetooth, WiFi, NFC and GPS +devices. + +Serial attached devices shall be a child node of the host UART device the +slave device is attached to. It is expected that the attached device is +the only child node of the UART device. The slave device node name shall +reflect the generic type of device for the node. + +Required Properties: + +- compatible : A string reflecting the vendor and specific device the node + represents. + +Optional Properties: + +- max-speed : The maximum baud rate the device operates at. This should + only be present if the maximum is less than the slave device + can support. For example, a particular board has some signal + quality issue or the host processor can't support higher + baud rates. + +Example: + +serial@1234 { + compatible = "ns16550a"; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; +}; -- 2.10.1