Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 10.3 \(3273\)) Subject: Re: [PATCH] Bluetooth: Add support for Intel Bluetooth device 9460/9560 [8087:0aaa] From: Marcel Holtmann In-Reply-To: <20170501133512.6fc88b81@fedora-linux-22.shared> Date: Tue, 2 May 2017 05:08:11 +0200 Cc: "linux-bluetooth@vger.kernel.org" , "jaya.p.g" Message-Id: <202602ED-263B-4501-B8FE-EEEFBA46D038@holtmann.org> References: <20170501133512.6fc88b81@fedora-linux-22.shared> To: Tedd Ho-Jeong An Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Tedd, > This patch adds support for Intel Bluetooth device 9460/9560 also known > as Jefferson Peak (JfP). The firmware downloading mechanism is same as > previous generation. So include the new USB product identifier and > whitelist the hardware variant. > > T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=8087 ProdID=0aaa Rev= 0.02 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > > Bootloader version: > < HCI Command: Intel Read Version (0x3f|0x0005) plen 0 >> HCI Event: Command Complete (0x0e) plen 13 > Intel Read Version (0x3f|0x0005) ncmd 32 > Status: Success (0x00) > Hardware platform: 0x37 > Hardware variant: 0x11 > Hardware revision: 0.0 > Firmware variant: 0x06 > Firmware revision: 0.1 > Firmware build: 42-52.2015 > Firmware patch: 0 > > Signed-off-by: Tedd Ho-Jeong An > --- > drivers/bluetooth/btusb.c | 4 ++++ > 1 file changed, 4 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel