Return-Path: From: Marcel Holtmann To: linux-bluetooth@vger.kernel.org Subject: [PATCH] Bluetooth: Send HCI Set Event Mask Page 2 command only when needed Date: Fri, 9 Jun 2017 18:43:56 +0200 Message-Id: <20170609164356.7330-1-marcel@holtmann.org> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 7655b4005dfb..93806b959039 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -548,6 +548,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req) { struct hci_dev *hdev = req->hdev; u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; /* If Connectionless Slave Broadcast master role is supported * enable all necessary events for it. @@ -557,6 +558,7 @@ static void hci_set_event_mask_page_2(struct hci_request *req) events[1] |= 0x80; /* Synchronization Train Complete */ events[2] |= 0x10; /* Slave Page Response Timeout */ events[2] |= 0x20; /* CSB Channel Map Change */ + changed = true; } /* If Connectionless Slave Broadcast slave role is supported @@ -567,13 +569,24 @@ static void hci_set_event_mask_page_2(struct hci_request *req) events[2] |= 0x02; /* CSB Receive */ events[2] |= 0x04; /* CSB Timeout */ events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; } /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { events[2] |= 0x80; + changed = true; + } - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (changed) + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events); } static int hci_init3_req(struct hci_request *req, unsigned long opt) -- 2.9.4