Return-Path: From: Loic Poulain To: robh+dt@kernel.org, f.fainelli@gmail.com, rjui@broadcom.com, marcel@holtmann.org, johan.hedberg@gmail.com, stefan.wahren@i2se.com Cc: devicetree@vger.kernel.org, linux-bluetooth@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Loic Poulain Subject: [PATCH v4 4/4] Bluetooth: hci_bcm: Add serdev support Date: Thu, 17 Aug 2017 19:59:51 +0200 Message-Id: <1502992791-10265-4-git-send-email-loic.poulain@gmail.com> In-Reply-To: <1502992791-10265-1-git-send-email-loic.poulain@gmail.com> References: <1502992791-10265-1-git-send-email-loic.poulain@gmail.com> List-ID: Add basic support for Broadcom serial slave devices. Probe the serial device, retrieve its maximum speed and register a new hci uart device. Tested/compatible with bcm43438 (RPi3). Signed-off-by: Loic Poulain --- v2: dt-bindings as separate patch rebase on upcoming pi3 dts changes v3: changes in bcm serdev drivers: name refactoring and additional comments Add generic host_set_baudrate method Use agnostic device_property_read v4: changes in doc and dts: Add additional params to broadcom bt dt-bindings Set the max baudrate to 2000000 instead of 921600 use chosen/stdout-path instead of console= remove useless earlyprintk same changes in bcm283x.dtsi drivers/bluetooth/hci_bcm.c | 85 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 83 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 1eb286a..34882f1 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include #include #include @@ -34,6 +36,7 @@ #include #include #include +#include #include #include @@ -46,6 +49,7 @@ #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */ +/* platform device driver resources */ struct bcm_device { struct list_head list; @@ -69,6 +73,12 @@ struct bcm_device { #endif }; +/* serdev driver resources */ +struct bcm_serdev { + struct hci_uart hu; +}; + +/* generic bcm uart resources */ struct bcm_data { struct sk_buff *rx_skb; struct sk_buff_head txq; @@ -80,6 +90,14 @@ struct bcm_data { static DEFINE_MUTEX(bcm_device_lock); static LIST_HEAD(bcm_device_list); +static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed) +{ + if (hu->serdev) + serdev_device_set_baudrate(hu->serdev, speed); + else + hci_uart_set_baudrate(hu, speed); +} + static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed) { struct hci_dev *hdev = hu->hdev; @@ -290,6 +308,14 @@ static int bcm_open(struct hci_uart *hu) hu->priv = bcm; + /* If this is a serdev defined device, then only use + * serdev open primitive and skip the rest. + */ + if (hu->serdev) { + serdev_device_open(hu->serdev); + goto out; + } + if (!hu->tty->dev) goto out; @@ -325,6 +351,12 @@ static int bcm_close(struct hci_uart *hu) bt_dev_dbg(hu->hdev, "hu %p", hu); + /* If this is a serdev defined device, only use serdev + * close primitive and then continue as usual. + */ + if (hu->serdev) + serdev_device_close(hu->serdev); + /* Protect bcm->dev against removal of the device or driver */ mutex_lock(&bcm_device_lock); if (bcm_device_exists(bdev)) { @@ -400,7 +432,7 @@ static int bcm_setup(struct hci_uart *hu) speed = 0; if (speed) - hci_uart_set_baudrate(hu, speed); + host_set_baudrate(hu, speed); /* Operational speed if any */ if (hu->oper_speed) @@ -413,7 +445,7 @@ static int bcm_setup(struct hci_uart *hu) if (speed) { err = bcm_set_baudrate(hu, speed); if (!err) - hci_uart_set_baudrate(hu, speed); + host_set_baudrate(hu, speed); } finalize: @@ -906,9 +938,57 @@ static int bcm_remove(struct platform_device *pdev) }, }; +static int bcm_serdev_probe(struct serdev_device *serdev) +{ + struct bcm_serdev *bcmdev; + u32 speed; + int err; + + bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL); + if (!bcmdev) + return -ENOMEM; + + bcmdev->hu.serdev = serdev; + serdev_device_set_drvdata(serdev, bcmdev); + + err = device_property_read_u32(&serdev->dev, "max-speed", &speed); + if (!err) + bcmdev->hu.oper_speed = speed; + + return hci_uart_register_device(&bcmdev->hu, &bcm_proto); +} + +static void bcm_serdev_remove(struct serdev_device *serdev) +{ + struct bcm_serdev *bcmdev = serdev_device_get_drvdata(serdev); + + hci_uart_unregister_device(&bcmdev->hu); +} + +#ifdef CONFIG_OF +static const struct of_device_id bcm_bluetooth_of_match[] = { + { .compatible = "brcm,bcm43438-bt" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); +#endif + +static struct serdev_device_driver bcm_serdev_driver = { + .probe = bcm_serdev_probe, + .remove = bcm_serdev_remove, + .driver = { + .name = "hci_uart_bcm", + .of_match_table = of_match_ptr(bcm_bluetooth_of_match), + }, +}; + int __init bcm_init(void) { + /* For now, we need to keep both platform device + * driver (ACPI generated) and serdev driver (DT). + */ platform_driver_register(&bcm_driver); + serdev_device_driver_register(&bcm_serdev_driver); return hci_uart_register_proto(&bcm_proto); } @@ -916,6 +996,7 @@ int __init bcm_init(void) int __exit bcm_deinit(void) { platform_driver_unregister(&bcm_driver); + serdev_device_driver_unregister(&bcm_serdev_driver); return hci_uart_unregister_proto(&bcm_proto); } -- 1.9.1