Return-Path: Subject: Re: [PATCH 3/3 v1] doc/mgmt-api: Add advertising phys support to flags To: Jaganath Kanakkassery CC: , Jaganath Kanakkassery References: <1510809661-23067-1-git-send-email-jaganathx.kanakkassery@intel.com> From: ERAMOTO Masaya Message-ID: <0e524d27-13c7-be5c-a17a-2c62aab2a379@jp.fujitsu.com> Date: Fri, 17 Nov 2017 14:32:57 +0900 MIME-Version: 1.0 In-Reply-To: <1510809661-23067-1-git-send-email-jaganathx.kanakkassery@intel.com> Content-Type: text/plain; charset="utf-8" Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Jaganath, On 11/16/2017 02:21 PM, Jaganath Kanakkassery wrote: > --- > doc/mgmt-api.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > index b59bf0c..c138f47 100644 > --- a/doc/mgmt-api.txt > +++ b/doc/mgmt-api.txt > @@ -2504,6 +2504,9 @@ Read Advertising Features Command > 4 Add TX Power field to Adv_Data > 5 Add Appearance field to Scan_Rsp > 6 Add Local Name in Scan_Rsp > + 7 Secondary Channel with LE 1M > + 8 Secondary Channel with LE 2M > + 9 Secondary Channel with LE Coded > > The Flags bit 0 indicates support for connectable advertising > and for switching to connectable advertising independent of the > @@ -2553,6 +2556,15 @@ Read Advertising Features Command > space is limited a short version or no name information. The > Local Name will be added at the end of the scan response data. > > + The Flags bit 7 indicates support for advertising in secondary > + channel in LE 1M PHY. > + > + The Flags bit 8 indicates support for advertising in secondary > + channel in LE 2M PHY. Primary channel would be on 1M. > + > + The Flags bit 9 indicates support for advertising in secondary > + channel in LE CODED PHY. > + > The valid range for Instance identifiers is 1-254. The value 0 > is reserved for internal use and the value 255 is reserved for > future extensions. However the Max_Instances value for indicating > @@ -2613,6 +2625,9 @@ Add Advertising Command > 4 Add TX Power field to Adv_Data > 5 Add Appearance field to Scan_Rsp > 6 Add Local Name in Scan_Rsp > + 7 Secondary Channel with LE 1M > + 8 Secondary Channel with LE 2M > + 9 Secondary Channel with LE Coded > > When the connectable flag is set, then the controller will use > undirected connectable advertising. The value of the connectable > @@ -2640,6 +2655,13 @@ Add Advertising Command > supported to provide less air traffic for devices implementing > broadcaster role. > > + Secondary channel flags can be used to avertise in secondary s/avertise/advertise/ > + channel with the corresponding PHYs. In case of 2M, the primary > + channel used would be 1M. If none of them are set then secondary > + channel advertising would be disable for this insance which is as Perhaps, s/insance/instance/ > + good as legacy adveritsing. Combining the sets would result in s/adveritsing/advertising/ > + multiple adv sets being created. > + > The Duration parameter configures the length of an Instance. The > value is in seconds. > > Regards, Eramoto