Return-Path: From: Jaganath Kanakkassery To: linux-bluetooth@vger.kernel.org Cc: Jaganath Kanakkassery Subject: [PATCH 3/3 v1] doc/mgmt-api: Add advertising phys support to flags Date: Thu, 16 Nov 2017 10:51:01 +0530 Message-Id: <1510809661-23067-1-git-send-email-jaganathx.kanakkassery@intel.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: --- doc/mgmt-api.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index b59bf0c..c138f47 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -2504,6 +2504,9 @@ Read Advertising Features Command 4 Add TX Power field to Adv_Data 5 Add Appearance field to Scan_Rsp 6 Add Local Name in Scan_Rsp + 7 Secondary Channel with LE 1M + 8 Secondary Channel with LE 2M + 9 Secondary Channel with LE Coded The Flags bit 0 indicates support for connectable advertising and for switching to connectable advertising independent of the @@ -2553,6 +2556,15 @@ Read Advertising Features Command space is limited a short version or no name information. The Local Name will be added at the end of the scan response data. + The Flags bit 7 indicates support for advertising in secondary + channel in LE 1M PHY. + + The Flags bit 8 indicates support for advertising in secondary + channel in LE 2M PHY. Primary channel would be on 1M. + + The Flags bit 9 indicates support for advertising in secondary + channel in LE CODED PHY. + The valid range for Instance identifiers is 1-254. The value 0 is reserved for internal use and the value 255 is reserved for future extensions. However the Max_Instances value for indicating @@ -2613,6 +2625,9 @@ Add Advertising Command 4 Add TX Power field to Adv_Data 5 Add Appearance field to Scan_Rsp 6 Add Local Name in Scan_Rsp + 7 Secondary Channel with LE 1M + 8 Secondary Channel with LE 2M + 9 Secondary Channel with LE Coded When the connectable flag is set, then the controller will use undirected connectable advertising. The value of the connectable @@ -2640,6 +2655,13 @@ Add Advertising Command supported to provide less air traffic for devices implementing broadcaster role. + Secondary channel flags can be used to avertise in secondary + channel with the corresponding PHYs. In case of 2M, the primary + channel used would be 1M. If none of them are set then secondary + channel advertising would be disable for this insance which is as + good as legacy adveritsing. Combining the sets would result in + multiple adv sets being created. + The Duration parameter configures the length of an Instance. The value is in seconds. -- 2.7.4